Fig.3/4 Wedelstaet 1.6/1.6mm Solid Handle 6mm
The Fig.3/4 Wedelstaet is a double-ended operative instrument in the Wedelstaedt pattern with 1.6 mm working ends at both sides. The slightly broader thin curved tips carve amalgam, refine composite margins, and cleave enamel in moderately sized interproximal regions during Class II restorations. Machined by Equate Instruments from autoclavable stainless steel with a knurled 6 mm solid handle, the Wedelstaet 3/4 delivers precise tactile control during carving and chisel sequences. Supplied non-sterile for in-office steam sterilisation in cassettes or pouches.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Nystrom I Composite Instrument - Hollow Stainless Handle
The Nystrom I is a double-ended composite modelling instrument designed for contouring and sculpting resin-based restorations. One working end presents a slender angled probe for adapting composite along line-angles and narrow fissures, while the opposite end offers a slightly broader curved blade for shaping occlusal anatomy and placing delicate increments. Crafted from precision-machined stainless steel with a hollow, knurled ergonomic handle, the instrument is lightweight, autoclavable, and sits comfortably in a pen grip during lengthy restorative procedures. Equate Instruments supplies the Nystrom I non-sterile for in-clinic steam sterilisation.
View
Nystrom I 2.0 mm Composite Instrument
The Nystrom I is a double-ended composite modelling instrument designed for contouring and sculpting resin-based restorations. One working end presents a slender angled probe for adapting composite along line-angles and narrow fissures, while the opposite end offers a slightly broader curved blade for shaping occlusal anatomy and placing delicate increments. Crafted from precision-machined stainless steel and fitted with a contoured silicone ergonomic handle, the instrument sits comfortably in a pen grip during lengthy restorative procedures and is fully autoclavable. Equate Instruments supplies the Nystrom I non-sterile for in-clinic steam sterilisation.
View
Nystrom I 2.0 mm Composite Instrument
The Nystrom I is a double-ended composite modelling instrument designed for contouring and sculpting resin-based restorations. One working end presents a slender angled probe for adapting composite along line-angles and narrow fissures, while the opposite end offers a slightly broader curved blade for shaping occlusal anatomy and placing delicate increments. Crafted from precision-machined stainless steel and fitted with a contoured silicone ergonomic handle, the instrument sits comfortably in a pen grip during lengthy restorative procedures and is fully autoclavable. Equate Instruments supplies the Nystrom I non-sterile for in-clinic steam sterilisation.
View
Nystrom I Composite Instrument - Slim Green Handle
The Nystrom I is a double-ended composite modelling instrument designed for contouring and sculpting resin-based restorations. One working end presents a slender angled probe for adapting composite along line-angles and narrow fissures, while the opposite end offers a slightly broader curved blade for shaping occlusal anatomy and placing delicate increments. Crafted from precision-machined stainless steel and fitted with a slim silicone ergonomic handle, the instrument sits comfortably in a pen grip during lengthy restorative procedures and is fully autoclavable. Equate Instruments supplies the Nystrom I non-sterile for in-clinic steam sterilisation.
View
Fig. 1 Markley Carver 0.6/0.9mm
The Fig. 1 Markley Carver is a double-ended restorative instrument with very fine Markley-style blades of 0.6 mm and 0.9 mm, made for detailed carving of narrow grooves, pits, and anterior restoration margins. The slim profile allows careful removal of small increments of material without over-reducing the restoration contour. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip maintains tactile feedback during precise strokes and the balanced shaft supports light, controlled pressure. Supplied non-sterile for in-clinic steam sterilisation.
View
Fig. 2 Markley Carver 0.6/1.1mm
The Fig. 2 Markley Carver is a double-ended restorative instrument with fine Markley-style blades of 0.6 mm and 1.1 mm, pairing a very small detail tip with a slightly broader blade for step-up carving on narrow restorations and anterior margins. The slim profile reduces the risk of over-reducing the restoration during detail work. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip preserves tactile feedback during precise strokes and the balanced shaft supports light, controlled pressure. Supplied non-sterile for in-clinic steam sterilisation.
View
Fig. 3 Markley Carver 0.5/0.5mm
The Fig. 3 Markley Carver is a double-ended restorative instrument with two very fine 0.5 mm Markley-style tips, matched on both ends for ultra-detailed anatomy work in narrow grooves, anterior margins, and conservative restorations. The slim, pointed profile allows the operator to refine small increments of material with minimal risk of over-reducing the restoration. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip preserves tactile feedback during light strokes and the balanced shaft supports the controlled pressure that detail carving demands. Supplied non-sterile for in-clinic steam sterilisation.
View
Fig. 4 Markley Carver 1.6/2.8mm
The Fig. 4 Markley Carver is a double-ended restorative instrument with Markley-style blades of 1.6 mm and 2.8 mm, pairing a moderate detail blade with a broader carving edge for everyday posterior amalgam anatomy. The stepped sizes allow the operator to move between finer occlusal detail and broader marginal-ridge carving on the same instrument. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip preserves tactile feedback during wet work and the balanced shaft supports controlled carving strokes. Supplied non-sterile for in-clinic steam sterilisation.
View
Fig. 5 Markley Carver 1.2/1.2mm
The Fig. 5 Markley Carver is a double-ended restorative instrument with matched 1.2 mm Markley-style blades on both ends, letting the operator approach a narrow restoration from either side with the same fine cutting edge. The matched sizing keeps detail carving consistent on conservative restorations and anterior margins. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip preserves tactile feedback during precise strokes and the balanced shaft supports controlled pressure across both ends. Supplied non-sterile for in-clinic steam sterilisation.
View
Fig. 6 Markley Carver 1.6/2.8mm
The Fig. 6 Markley Carver is a double-ended restorative instrument with Markley-style blades of 1.6 mm and 2.8 mm in an alternate shank configuration from Fig. 4, offering the same stepped size pairing but with a different approach angle for posterior amalgam anatomy. The shank geometry supports clean carving strokes from either side of the restoration. Machined from stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip preserves tactile feedback during wet work and the balanced shaft supports controlled carving pressure. Supplied non-sterile for in-clinic steam sterilisation.
View
Fig.1 Ladmore 1.3/1.9mm Solid Handle 6mm
The Fig.1 Ladmore is a double-ended restorative hand instrument built for condensing and carving composite or amalgam in interproximal regions. Its 1.3 mm and 1.9 mm pointed working ends reach tight Class II boxes and refine proximal margins without packing the matrix away from the contact area. Machined from autoclavable stainless steel with a knurled 6 mm solid handle, the instrument is balanced for fingertip control during prolonged restorative appointments. Supplied non-sterile by Equate Instruments for in-office steam sterilisation in pouches or cassettes.
View
Fig.1/2 Wedelstaet 1.3/1.3mm Solid Handle 6mm
The Fig.1/2 Wedelstaet is a double-ended operative instrument in the classic Wedelstaedt pattern with 1.3 mm working ends at both sides. The thin curved tips access interproximal regions to carve amalgam, refine composite margins, and cleave undercut enamel during conservative cavity preparation. Crafted by Equate Instruments from autoclavable stainless steel with a knurled 6 mm solid handle, the Wedelstaet 1/2 delivers precise tactile control for interproximal finishing. Supplied non-sterile for standard in-clinic steam sterilisation in cassettes or pouches.
View
