Orthodontic
Pliers, cutters, band and bracket instruments, ligature tools, gauges, and aligner instruments for orthodontic treatment.
396 instruments available
Showing 1–24 of 396 instruments
Dental Measuring Ruler 10 cm
The Dental Measuring Ruler 10 cm is a slim stainless-steel scale used chairside to measure paper points, gutta-percha cones, K-files and orthodontic wire with single-hand control. Millimetre and half-millimetre graduations are etched into the surface, giving a reliable reference for working-length measurement and malocclusion assessment. The rigid stainless-steel body resists bending under normal use and remains accurate over many autoclave cycles. The small top hole allows the ruler to hang from a tray hook or lanyard when not in use. Supplied non-sterile, it is a practical chairside measuring tool in the Equate Instruments range.
Dental Measuring Ruler 15 cm
The Dental Measuring Ruler 15 cm is a slim stainless-steel scale used chairside to measure paper points, gutta-percha cones, K-files and orthodontic wire with single-hand control. The longer 15 cm length extends to the full span of a long-file working length or a facial-arch wire segment, while the etched millimetre and half-millimetre graduations remain legible after repeated autoclaving. The rigid stainless-steel body resists bending in routine use, and a hanging hole at the top lets the ruler sit on a tray hook between cases. Supplied non-sterile, it is the longer chairside companion to the 10 cm ruler in the Equate Instruments range.
Deluxe Boley Gauge
The Deluxe Boley Gauge is a precision stainless-steel dental caliper calibrated in millimetres for measuring tooth widths, crown heights, prosthetic teeth and orthodontic study models. The pointed sliding jaw reads against the main scale from 0 to 80 mm, while a vernier track on the auxiliary jaw adds fine tenth-millimetre resolution for close work. Fabricated from hardened stainless steel by Equate Instruments, the gauge holds its calibration through repeated autoclave cycles and routine chemical disinfection. The pointed tips reach into interproximal contacts and embrasures where standard rulers cannot.
Vernier Dental Caliper 130mm
This dental caliper is a precision measuring instrument used to gauge tooth widths, arch-form dimensions, wax patterns, and study-model landmarks. The scale reads directly in millimetres so the clinician can capture accurate linear measurements chairside or on the bench during case planning and fabrication. Crafted in stainless steel with a fully autoclavable body, this Equate Instruments caliper is built for daily reuse across restorative, prosthodontic, and orthodontic workflows. Supplied non-sterile, it is ready for routine in-clinic sterilisation between measurements.
Boley Dental Caliper 145mm
This dental caliper is a precision measuring instrument used to gauge tooth widths, arch-form dimensions, wax patterns, and study-model landmarks. The scale reads directly in millimetres so the clinician can capture accurate linear measurements chairside or on the bench during case planning and fabrication. Crafted in stainless steel with a fully autoclavable body, this Equate Instruments caliper is built for daily reuse across restorative, prosthodontic, and orthodontic workflows. Supplied non-sterile, it is ready for routine in-clinic sterilisation between measurements.
Dental Caliper 0-90 mm
This dental caliper is engineered for accurate linear measurement of teeth, restorations, and stone models. The stainless-steel shaft carries a clearly etched scale graduated from zero to ninety millimetres, and a knurled thumb-screw collar locks the sliding indicator at the measured position. A short offset reference beak at the tip lets the clinician register a stable contact point on the working surface. Built from corrosion-resistant stainless steel and fully autoclavable, this caliper is a trusted daily measurement tool for orthodontists, prosthodontists, and dental technicians. Equate Instruments supplies it non-sterile for the clinic's preferred sterilisation workflow.
Iwanson Caliper for Wax 10 mm
The Iwanson spring caliper is a precision instrument used by dental technicians and prosthodontists to measure the thickness of wax patterns, metal copings, ceramic build-ups and thin sheet materials. The sprung arms follow the contour of the work piece, and the curved jaws close onto the measurement point while the scale reads directly on the arc from 0 to 10 mm. Crafted by Equate Instruments from stainless steel for stable spring tension, the caliper is autoclavable and tolerates routine lab solvents. A 1/10 mm track supports tenth-millimetre resolution for crown thickness checks.
How Utility Plier 3.2mm Max 0.028 Inch Wire
The How Utility Plier is a general-purpose orthodontic instrument for grasping, contouring and bending arch wires, as well as seating molar bands and loosely crimping crowns. Tapered parallel tips give the clinician fine control over wire positioning, and the plier will hold round or rectangular archwires up to 0.028 inch (0.71 mm) in diameter. Forged from stainless steel with a simple spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for in-clinic sterilisation between patients.
Bracket Positioning Tweezer 12 cm
The Bracket Positioning Tweezer is a 12 cm stainless-steel orthodontic tweezer designed to pick up, orient, and seat brackets during direct-bonding procedures. A fine hooked notch at the working tip engages the bracket slot or tie-wing and holds the bracket firmly while the clinician seats the adhesive base on the tooth surface and fine-tunes the mesiodistal and vertical position before cure. The shanks are fully satin-finished to reduce glare under the operating light and the grip zone is contoured for precise fingertip control. Equate Instruments supplies this tweezer non-sterile in autoclavable stainless steel for routine in-clinic sterilisation alongside the rest of the bonding setup.
Hard Wire Cutter Plier 15 Degree Tungsten-Carbide Max 0.028 Inch Wire
This Hard Wire Cutter Plier is an orthodontic cutting instrument with 15-degree angled tungsten-carbide inserts on the cutting edges. The angled head lets the clinician position the cut flush against the buccal tube or bracket, and the tungsten-carbide tips retain their edge through repeated cuts on hardened stainless-steel and beta-titanium archwires up to 0.028 inch (0.71 mm). Forged from stainless steel with a spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for in-clinic processing.
Orthodontic Bracket Height Gauge with 3.5, 4.0, 4.5 and 5.0 mm Arms
This Orthodontic Bracket Height Gauge is a four-arm calibrated instrument for measuring and positioning orthodontic brackets on the tooth crown. Each arm is stamped with a different reference height - 3.5, 4.0, 4.5 and 5.0 mm - so the clinician can rotate the gauge to select the appropriate vertical position for each tooth type. Machined from stainless steel with a thin, lightweight cross body, this Equate Instruments gauge is fully autoclavable and supplied non-sterile for routine in-clinic processing.
Micro Pin and Ligature Cutter Max 0.012 Inch Wire Tungsten-Carbide
This Micro Pin and Ligature Cutter is a slim orthodontic cutter with tungsten-carbide inserts designed to trim stainless-steel ligature wires and small pins up to 0.012 inch (0.36 mm) in diameter. The fine cutting edges give a clean shear without crushing the wire, which is critical when placing lock pins or trimming excess ligature after tying. Manufactured from stainless steel with a spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for routine in-clinic processing.
Direct Bond Bracket Remover Plier
The Direct Bond Bracket Remover Plier is an orthodontic debonding instrument with a notched upper beak that engages the bracket wings and a flat lower beak that rests on the occlusal or incisal edge. Closing the handle pivots the bracket off the tooth with minimal enamel stress, preserving the surface for re-bonding or finishing. Forged from stainless steel with a slim spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for in-clinic processing between patients.
Angulated Debonding Pliers (TC)
The Angulated Debonding Pliers are orthodontic instruments built for clean, controlled bracket removal at the end of fixed-appliance treatment. The angulated working head lets the clinician line up on the bonding base of each bracket, concentrating shear force at the adhesive interface so the bracket lifts cleanly without unnecessary load on the enamel. A tungsten carbide insert on the occluding jaw holds its edge through many debonding cycles, keeping the action predictable across full-mouth appointments. From Equate Instruments, the plier features slim tapered arms and a smooth spring return for comfort in extended sessions. The body is corrosion-resistant stainless steel, fully autoclavable, and supplied non-sterile for in-clinic sterilisation in the clinician's preferred workflow.
Adhesive Removing Pliers (TC)
The Adhesive Removing Pliers are built for post-debond clean-up, lifting residual bonding composite from the enamel without scarring the tooth surface. The plier pairs a white Teflon occlusal pad with a tungsten-carbide scraping tip on the opposing jaw. In use, the Teflon pad seats on the occlusal surface of the tooth while the TC scraper sweeps along the labial or buccal face, shearing adhesive away at the enamel interface. The forged stainless steel body from Equate Instruments is slim and well-balanced for extended chairside sessions, with a smooth spring return between squeezes. It is corrosion-resistant and fully autoclavable, and the working parts are replaceable when worn so the plier stays in service longer. Supplied non-sterile for in-clinic processing.
Adhesive Remover Changeable Parts - 5 Sets (Carbide Tip + Teflon Pad)
This pack contains five replacement sets of working parts for orthodontic adhesive removing pliers. Each set includes one tungsten carbide scraping tip and one Teflon occlusal pad, ready to swap into a compatible adhesive-removing plier when the original parts wear or foul with composite residue. Keeping a stock of replacement tips extends the life of the parent instrument and keeps post-debond finishing predictable appointment after appointment. The tungsten carbide tip is machined for consistent edge geometry, while the Teflon pad provides a soft, non-marking stop against the occlusal surface of the tooth during scraping. Parts from Equate Instruments fit standard adhesive removing pliers designed around a snap-in or screw-retained tip interface. Supplied non-sterile for processing in the clinic's preferred workflow.
Dela Rosa Arch Forming Pliers with Groove 0.41/0.46/0.56 mm (.016″/.018″/.022″ Wire)
The Dela Rosa Arch Forming Pliers are designed for shaping round orthodontic archwires to the dental arch form. Three graduated grooves on one jaw, sized for 0.41 mm (.016″), 0.46 mm (.018″), and 0.56 mm (.022″) round wires, seat the wire without kinking while the opposing flat jaw bends the curve. Working the wire progressively through the grooves develops a smooth, symmetrical arch that matches the patient's intended form. Equate Instruments finishes the plier in forged stainless steel with a slim, well-balanced profile and a smooth box-joint for long-term precision. The instrument is corrosion resistant, fully autoclavable, and supplied non-sterile so the clinic can process it through its normal sterilisation cycle.
Bracket Holding Tweezers 12 cm
Bracket Holding Tweezers are slim orthodontic tweezers with a pair of fine angled tips shaped to capture the base of a bracket during bonding. The angled bend gives line-of-sight approach to anterior and posterior teeth without the tweezer body obscuring the working field, and the thin jaw profile stays out of the way of the curing light. The 12 cm stainless steel body from Equate Instruments is autoclavable, corrosion resistant, and weighted for fine-motor control. Supplied non-sterile for processing in the clinic's preferred sterilisation workflow, and rated for repeated chairside use across bonding, bracket repositioning, and debonding appointments.
Bracket Placing Tweezers 13 cm
Bracket Placing Tweezers are slim 13 cm orthodontic tweezers with a pair of fine, angled tips shaped for accurate bracket pickup and seating. The angled bend gives clear line of sight to the tooth face during both direct and indirect bonding, and the narrow jaw profile keeps the tweezer body out of the curing-light path while the resin sets. Manufactured by Equate Instruments in forged stainless steel, the body is light, balanced, and tapered for fine-motor control. It is corrosion resistant, fully autoclavable, and supplied non-sterile so the clinic can process it through its normal sterilisation workflow. Suitable for bonding, bracket repositioning, and chairside tray handling.
Tweed Loop Forming Pliers 0.55 x 0.64 mm (.021″ x .025″ Wire)
Tweed Loop Forming Pliers are an orthodontic bending plier designed to form helical and bull-horn closing loops in rectangular archwire up to 0.55 x 0.64 mm (.021″ x .025″). One jaw carries a cylindrical forming post around which the wire is wrapped to set the loop diameter; the opposing jaw grips the wire firmly so it follows the post without springing back. Working the wire in successive passes creates clean, repeatable loops for space closure and vertical control. The plier body is forged stainless steel and delivered by Equate Instruments as a corrosion-resistant, fully autoclavable tool. The smooth box-joint pivot, fine tip alignment, and balanced handle shape suit extended wire-bending sessions in the orthodontic laboratory or chairside.
Dental Measuring Ruler 0-60mm
The dental measuring ruler is a thin, rigid stainless-steel blade etched with graduated millimetre markings along its working edge, giving clinicians a quick reference for intraoral and extraoral dimensional checks, including implant-site assessment, cast measurements, and radiographic references. Its low profile slips into tight working spaces without distorting soft tissue or interfering with adjacent structures. The polished surface stays legible across repeated sterilisation cycles, and the instrument is fully autoclavable. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
Dental Measuring Ruler 0-60mm Square Edge
The dental measuring ruler is a thin, rigid stainless-steel blade etched with graduated millimetre markings along its working edge, giving clinicians a quick reference for intraoral and extraoral dimensional checks, including implant-site assessment, cast measurements, and radiographic references. Its low profile slips into tight working spaces without distorting soft tissue or interfering with adjacent structures. The polished surface stays legible across repeated sterilisation cycles, and the instrument is fully autoclavable. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
Dental Measuring Ruler 0-80mm
The dental measuring ruler is a thin, rigid stainless-steel blade etched with graduated millimetre markings along its working edge, giving clinicians a quick reference for intraoral and extraoral dimensional checks, including implant-site assessment, cast measurements, and radiographic references. Its low profile slips into tight working spaces without distorting soft tissue or interfering with adjacent structures. The polished surface stays legible across repeated sterilisation cycles, and the instrument is fully autoclavable. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
Posterior Band Removing Pliers Long Handle
The Posterior Band Removing Pliers are designed for the controlled removal of orthodontic bands from posterior teeth. One jaw is fitted with a cushioned plastic tip that rests on the occlusal surface to protect the enamel, while the opposing beak engages the gingival margin of the band and lifts it away from the tooth without distortion. The long, tapered handle provides reach into the posterior segments of both arches, and the precision-milled joint and wear-resistant beak withstand repeated clinical use. Equate Instruments supplies this plier in autoclavable stainless steel, making it a dependable debanding instrument for orthodontists and orthodontic assistants at the end of active treatment.
