Oral Surgery
Forceps, elevators, luxators, chisels, osteotomes, rongeurs, needle holders, scissors, and retractors for extractions and oral-maxillofacial surgery.
1206 instruments available
Showing 1–24 of 1206 instruments
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
Miller 8 Surgical Bone Curette - Titanium-Coated Hollow Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
Molt 9 Periosteal Elevator, 4mm/7mm Ends, Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
Periosteal Elevator 24G 4mm/4mm 17.5cm Hollow Handle Blue
The Periosteal Elevator 24G is a double-ended surgical instrument engineered for mucoperiosteal flap reflection during extractions, periodontal flap surgery, and implant site preparation. The two 4 mm working tips, one chisel-shaped and one rounded spoon, allow clinicians to separate soft tissue from cortical bone with balanced pressure distribution and minimal trauma to the flap margins. Built on a lightweight 10 mm hollow handle with circumferential grooves, this 17.5 cm instrument from Equate Instruments keeps hand fatigue low during long surgical cases. The titanium working ends carry a blue anodised finish for reduced glare under operating-room illumination and increased surface hardness for wear resistance. It is fully autoclavable and supplied non-sterile for in-clinic processing.
Freer Periosteal Elevator - Titanium-Coated Hollow Handle
The Freer Periosteal Elevator is a double-ended hand instrument for separating, elevating and retracting soft tissue and periosteum during surgical extractions, implant placement and flap procedures. Both working ends carry a rounded spatula blade - one more rounded and one closer to straight - so the clinician can scrape cortical bone, dissect fibrous attachments and advance the flap without tearing the periosteum. This variant is finished with a titanium coating that gives the working tips their deep-blue colour, improving visual contrast against blood-field and bone while preserving the stainless substrate's autoclavability. The 9.5 mm hollow banded handle is light in the hand with stacked contrast rings that aid tactile orientation. Equate Instruments builds it for clinicians who want a colour-contrasted versatile flap elevator.
Freer Double-Ended Periosteal Elevator - Titanium Coated
The Freer periosteal elevator is a double-ended surgical instrument designed for the precise separation and elevation of soft tissue and periosteum from underlying bone. One end carries a rounded spatulate blade suited to gentle blunt dissection, while the opposite end offers a slightly sharper spatulate edge for lifting adherent periosteum along cortical bone. The working ends are titanium-coated for reduced tissue adhesion and controlled glide across wet bone. A hollow lightweight handle with a knurled grip zone helps reduce hand fatigue during flap elevation and multi-site osseous surgery. Equate Instruments supplies this elevator non-sterile for clinic-side steam sterilisation.
Pritchard Periosteal Elevator 10mm/4.5mm - 19cm Hollow Handle
The Pritchard Periosteal Elevator is a double-ended flap-reflection instrument used to lift and detach mucoperiosteum adhered to bone on palatal and vestibular surfaces. The broad 10 mm paddle-shaped end reflects the flap cleanly once the initial incision has been made, while the narrow 4.5 mm end reaches papillae, alveolar crests and tight lingual corners that the larger blade cannot enter. The 19 cm overall length is well balanced for full-arch flap work. Machined from surgical-grade stainless steel, the instrument is fully autoclavable and features a lightweight anatomical hollow handle with stepped contours for a secure grip. Equate Instruments finishes each working edge for smooth tissue contact that minimises flap tearing during periodontal, implant and extraction procedures.
Root Tip Elevator 1.5mm - Serrated Titanium-Coated Tips
The Root Tip Elevator 1.5mm is a slim double-ended surgical instrument used to luxate and deliver retained root tips and apical fragments from sockets where larger elevators cannot reach. Its fine curved tips carry serrated faces that bite into cementum and dentine for controlled purchase on small roots. Mirrored left and right working ends let the surgeon approach both mesial and distal surfaces of a fragment without changing instruments. A titanium nitride-style coating on each tip reduces glare under strong operating lights and preserves edge geometry through repeated use. The instrument is machined from surgical-grade stainless steel and finished on a lightweight knurled handle with colour-banded tactile rings. Fully autoclavable between patients, the Equate Instruments root tip elevator belongs in any extraction kit focused on retained roots.
Heidbrink Root Elevator Fig. 13/14 - 1.8mm Titanium-Coated Tips
The Heidbrink Root Elevator Fig. 13/14 is a classic double-ended root elevator used to luxate and deliver apical and furcation root fragments, especially after a tooth fractures during extraction. Its mirrored 1.8 mm blades on left and right ends let the surgeon work mesially and distally from a single instrument, following the curvature of the root surface. The delicate triangular tip profile wedges into the periodontal-ligament space without over-widening the socket. A titanium nitride-style coating on each tip preserves edge geometry through repeated use and reduces glare under operating lights. The instrument is machined from surgical-grade stainless steel on a lightweight knurled handle with colour-coded rings, and is fully autoclavable. Equate Instruments hand-finishes each edge for consistent working geometry.
Soft Tissue Curette - Right, Hollow Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
Soft Tissue Curette - Left, Hollow Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
Miller 21 Surgical Bone Curette - C8 Hollow Knurled Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
Buser Periosteal Elevator 17.5cm - Anatomical Hollow Handle
The Buser Periosteal Elevator 17.5 cm is a double-ended surgical instrument designed for reflecting and retracting mucoperiosteum during flap surgery, osseous procedures and implant site exposure. One working end features a sharp pointed blade suited to interproximal release and precise papilla reflection, while the opposite end offers a rounded blade for broader periosteal elevation along the bone. Crafted from stainless steel with an anatomical hollow handle, the instrument is balanced for controlled leverage in the operator's hand. Equate Instruments supplies it non-sterile and fully autoclavable for standard clinic sterilisation.
Periosteal Molt 3.3/2.8mm
The Periosteal Molt 3.3/2.8 mm is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during flap surgery, tunnelling procedures, and blunt tissue reflection. Its narrow curved 3.3 mm and 2.8 mm working tips allow controlled subperiosteal elevation in confined access windows, supporting tunnel-style pouch preparation around anterior teeth. This Equate Instruments elevator is mounted on a lightweight hollow handle with a knurled finish for reliable tactile orientation in wet surgical fields. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in surgical trays or cassettes.
Periosteal Molt 7/5mm 18.5cm Hollow Handle 10mm
The Periosteal Molt is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during surgical extractions and flap surgery. Its two working tips support controlled subperiosteal elevation and minimise tearing when the gum flap is lifted, giving clinicians predictable access to underlying alveolar bone. This Equate Instruments elevator is built on a lightweight 10 mm hollow stainless-steel handle with circumferential grooves for tactile orientation in wet surgical fields, measuring 18.5 cm overall. It is fully autoclavable and supplied non-sterile for in-clinic processing in surgical trays or cassettes.
Soft Tissue Curette - Right, Solid Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
Soft Tissue Curette - Left, Solid Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
