Periodontal & Hygiene
Curettes, scalers, files, and probes for scaling, root planing, periodontal debridement, and hygiene maintenance.
396 instruments available
Showing 1–24 of 396 instruments
Sickle Scaler 204S
The Sickle Scaler 204S is a double-ended posterior sickle scaler engineered for supragingival calculus removal from interproximal surfaces of molars and premolars. Each working end carries a curved sickle blade with a triangular cross-section and a fine pointed tip, allowing the clinician to engage deposits from mesial and distal approaches without regrasping. The shank angulation is shaped to reach posterior sextants while preserving a stable neutral wrist position. Blades are produced from high-grade stainless steel for reliable edge retention through routine clinical service. Fully autoclavable, supplied non-sterile by Equate Instruments for in-clinic steam sterilisation in pouches or hygiene cassettes.
Gracey Curette 11-14 - Hollow Handle
This Gracey curette is a site-specific periodontal hand instrument ground for subgingival calculus removal and root planing. The double-ended working tips feature offset, paired Gracey blades set to the classic angulation, which keeps the lower shank parallel to the root surface during strokes. Site-specific placement supports controlled access to a defined region of the dentition without traumatising adjacent soft tissue. Crafted by Equate Instruments for daily hygiene and periodontal use, this curette is fully autoclavable and is intended for scaling and root planing, periodontal debridement, and maintenance recalls. Reusable and corrosion resistant, it is supplied non-sterile so the practice can sterilise it in pouches or cassettes using its preferred workflow.
Gracey Curette 12-13 - Hollow Handle
This Gracey curette is a site-specific periodontal hand instrument ground for subgingival calculus removal and root planing. The double-ended working tips feature offset, paired Gracey blades set to the classic angulation, which keeps the lower shank parallel to the root surface during strokes. Site-specific placement supports controlled access to a defined region of the dentition without traumatising adjacent soft tissue. Crafted by Equate Instruments for daily hygiene and periodontal use, this curette is fully autoclavable and is intended for scaling and root planing, periodontal debridement, and maintenance recalls. Reusable and corrosion resistant, it is supplied non-sterile so the practice can sterilise it in pouches or cassettes using its preferred workflow.
Lucas 86 Surgical Curette 2.5 mm - Blue Plasma Hollow Handle
The Lucas 86 is a double-ended surgical curette with small 2.5 mm spoon-shaped working ends used for debriding extraction sockets, removing soft tissue remnants, and creating bleeding points in alveolar bone. The narrow spoon diameter gives access to anterior sockets and small cystic cavities where larger bone curettes cannot reach. Both working tips carry a blue plasma-coloured finish over a stainless-steel body for visual contrast against blood and tissue in the surgical field. The hollow knurled handle offers a balanced, fatigue-reducing grip during extended surgical sessions. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Lucas 87 Surgical Curette 3.0 mm - Blue Plasma Hollow Handle
The Lucas 87 is a double-ended surgical curette with 3.0 mm spoon-shaped working ends intended for clearing extraction sockets, excavating cystic contents, and removing granulation tissue from alveolar bone. The mid-range spoon diameter handles premolar and molar sockets where the smaller Lucas 86 would be too narrow. Both tips are finished in a blue plasma colour over a stainless-steel body so the working end stands out clearly in the bloody surgical field. A hollow knurled handle keeps the instrument balanced during flap and extraction sequences. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Lucas 88 Surgical Curette 3.5 mm - Blue Plasma Hollow Handle
The Lucas 88 is a double-ended surgical curette with 3.5 mm spoon-shaped working ends engineered for curettage, cyst enucleation, and thorough debridement of molar extraction sockets. The larger spoon diameter clears bulkier tissue fragments in a single pass through wider sockets and surgical cavities. Both tips are finished in a blue plasma colour over a stainless-steel body so the working end remains visible against blood, granulation, and bone. The hollow knurled handle keeps the instrument balanced and comfortable during extended surgical procedures. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
WHO CPI Probe CP 11.5 Ball-End - Hollow Handle
The CP 11.5 WHO probe is a single-ended periodontal probe built to WHO Community Periodontal Index specifications, with a 0.5 mm ball tip and a black reference band between 3.5 and 5.5 mm. The ball end limits sulcular trauma during probing and gives a cleaner tactile picture of pocket depth and subgingival calculus. Markings support CPI-style screening, probing pocket depth, and detecting bleeding on probing during periodontal assessments. The probe is carried on a hollow stainless-steel handle with gold accent rings and a tapered lower barrel for balance. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Periodontal Probe CP 18 - Titanium-Coated
This periodontal probe is designed for accurate assessment of pocket depth, clinical attachment level, gingival bleeding, and furcation involvement. The slim working tip carries laser-etched graduations at diagnostic intervals, with high-contrast colour bands visible at chairside distance so the clinician can read pocket measurements without repositioning the patient. A fine rounded terminus slides gently to the base of the sulcus without perforating the junctional epithelium. Manufactured from corrosion-resistant stainless steel and fully autoclavable, this periodontal probe from Equate Instruments is a daily-use diagnostic tool for general dentists, dental hygienists, and periodontists during comprehensive exams, recall visits, and periodontal charting. Supplied non-sterile for in-clinic steam sterilisation.
UNC Periodontal Probe CP 15 - Hollow Handle
The CP 15 is a single-ended UNC-style periodontal probe engraved with millimetre markings from 1 to 15 mm for detailed assessment of probing pocket depth, clinical attachment loss, and recession. The long thin working end reaches deep sulci and furcation defects without obscuring the markings against the gingival margin. The probe is mounted on a hollow stainless-steel handle with a ribbed mid-section and a tapered lower barrel for balance in pen grip. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles, giving hygienists and general dentists a reliable daily diagnostic tool.
Periotome Curved / Straight 2.2 mm - Hollow Handle
This double-ended periotome pairs a curved 2.2 mm blade with a straight 2.2 mm blade for atraumatic tooth extraction. The thin sharp blades are driven into the periodontal ligament space to sever fibres and gently luxate the tooth without removing excess buccal or interproximal bone, preserving the socket for implant placement and healing. The curved blade reaches posterior and palatal aspects where direct straight access is limited, while the straight blade handles anterior teeth with a clean line of approach. The hollow stainless-steel handle carries a ribbed grip for balanced pen-hold control. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Periotome Curved / Curved 2.2 mm - Blue Plasma Hollow Handle
This double-ended periotome carries curved 2.2 mm blades on both ends for atraumatic tooth extraction in posterior and palatal regions. The thin sharp blades sever periodontal ligament fibres and gently luxate the tooth while preserving the buccal plate and interproximal bone, which supports implant placement and ridge maintenance. The paired curves let the clinician rotate the instrument between mesial and distal aspects without repositioning the hand. Both working ends carry a blue plasma finish over a stainless-steel body for visibility against tissue and bone, and the hollow stainless-steel handle with blue accent rings balances the instrument in pen grip. Supplied non-sterile by Equate Instruments and fully autoclavable.
Crane-Kaplan Scaler 1.5mm
The Crane-Kaplan 1.5 mm is a double-ended periodontal instrument used to mark pocket depth and recontour interproximal soft tissue prior to gingivectomy or long-bevel incisions. Each working tip carries a fine, angled piercing point calibrated to register a bleeding dot on the external gingiva at a 1.5 mm reference depth, giving the operator a visible cutting guide for predictable tissue removal. The mirrored tips allow efficient access to buccal and lingual surfaces without regrasping. The hollow, lightweight handle is titanium-coated for corrosion resistance and a reduced thermal feel, and is fully autoclavable. Supplied non-sterile by Equate Instruments for in-clinic processing.
Crane-Kaplan Sickle Scaler - Hollow Handle
The Crane-Kaplan is a double-ended sickle scaler used for interproximal tissue work and long-bevel incisions during periodontal and surgical procedures. The paired working ends feature pointed blade tips that cut cleanly along the gingival contour, supporting soft-tissue recontouring and flap preparation. Both blades are titanium nitride coated in a blue finish that resists corrosion and improves visibility against blood and tissue. A hollow stainless-steel handle with a knurled barrel and blue accent rings keeps the instrument balanced for pen-grip control across longer procedures. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
Crane-Kaplan Scaler 2.5mm
The Crane-Kaplan 2.5 mm is a double-ended periodontal instrument used to mark deeper pocket depth and recontour interproximal soft tissue prior to gingivectomy or long-bevel incisions. Each working tip carries an angled piercing point calibrated to register a bleeding dot on the external gingiva at a 2.5 mm reference depth, giving the operator a visible cutting guide for predictable tissue removal in cases with greater attachment loss. The mirrored tips allow efficient access to buccal and lingual surfaces without regrasping. The hollow, lightweight handle is titanium-coated for corrosion resistance and a reduced thermal feel, and is fully autoclavable. Supplied non-sterile by Equate Instruments for in-clinic processing.
Lucas Bone Curette 1.5mm - Hollow Ergonomic Handle
The Lucas Bone Curette 1.5mm is a surgical hand curette designed for post-extraction socket debridement, cyst enucleation and alveolar curettage. Its double-ended spoon-shaped working tips are ground to a sharp peripheral edge that cleanly scrapes soft tissue and pathological debris from bony walls without gouging the surrounding cortical bone. The 1.5 mm tip size gives dependable access to anterior sockets and narrow defects. Machined from surgical-grade stainless steel, the curette is fully autoclavable and finished with a lightweight hollow handle marked by colour-coded tactile rings for a secure wet grip. Equate Instruments hand-finishes each working edge for consistent geometry across the range, so the 1.5 mm pattern slots naturally alongside the larger Lucas variants in any extraction tray.
Lucas 85 Bone Curette 2 mm Hollow Handle
The Lucas Curette is a double-ended bone curette designed for tooth-socket debridement, cyst enucleation, and periapical curettage following extraction. The spoon-shaped working ends scoop granulation tissue, loose bone fragments, and inflamed soft tissue from the surgical bed, supporting a clean site for healing or subsequent implant placement. The slim hollow handle is knurled and pattern-banded for a secure tactile grip, and its balanced profile allows precise articulation through limited surgical access. Manufactured by Equate Instruments and supplied non-sterile, it is fully autoclavable and a reliable choice for oral surgeons and general practitioners performing routine extractions and minor oral surgery.
Lucas Bone Curette 2.5mm - Anatomical Hollow Handle
The Lucas Bone Curette 2.5mm is a double-ended surgical curette built for removal of soft tissue, granulation and pathological debris from extraction sockets. Its two spoon-shaped working tips feature sharp peripheral edges that scrape bony walls cleanly, while the 2.5 mm blade size suits the majority of premolar and molar sockets commonly encountered in general oral surgery. The instrument is machined from surgical-grade stainless steel and finished on an anatomical hollow handle with stepped contours that settle naturally into a pen grip. The handle is steam-autoclavable for straightforward clinic reprocessing, and the working edges are ground by hand for reliable geometry. Equate Instruments pairs this pattern with 1.5 mm and 3.0 mm Lucas variants so surgeons can build a complete socket-debridement set.
Lucas 87 Bone Curette 3.0mm - Hollow Ergonomic Handle
The Lucas 87 Bone Curette 3.0mm is the large-format member of the Lucas extraction-curette range, engineered for debriding wide molar and surgical sockets after tooth removal. Its double-ended 3.0 mm spoon-shaped working tips present sharp peripheral edges that shave granulation tissue and pathological debris from cortical bone walls with confident stroke control. The broader blade geometry is ideal for third-molar sites, large alveolar defects and cystic cavities. Each curette is machined from surgical-grade stainless steel and finished with a lightweight hollow handle banded with colour-coded tactile rings for a secure wet grip. It is supplied non-sterile and is fully autoclavable. Equate Instruments hand-finishes the peripheral edges to keep a consistent cutting profile alongside the 1.5 mm and 2.5 mm variants.
Lucas 88 Bone Curette 3.5 mm Hollow Handle
The Lucas Curette is a double-ended bone curette designed for tooth-socket debridement, cyst enucleation, and periapical curettage following extraction. The spoon-shaped working ends scoop granulation tissue, loose bone fragments, and inflamed soft tissue from the surgical bed, supporting a clean site for healing or subsequent implant placement. The slim hollow handle is knurled and pattern-banded for a secure tactile grip, and its balanced profile allows precise articulation through limited surgical access. Manufactured by Equate Instruments and supplied non-sterile, it is fully autoclavable and a reliable choice for oral surgeons and general practitioners performing routine extractions and minor oral surgery.
Sickle Scaler Fig. 204SD - Solid Knurled Handle
The Sickle Scaler Fig. 204SD is a posterior hand scaler designed for removing supragingival calculus from the buccal, lingual and interproximal surfaces of molars and premolars. Its double-ended contra-angle shanks position the paired pointed sickle tips at the optimal angulation for distal and mesial access around the posterior dentition, and the sharp flat working face chips tenacious calculus efficiently without heavy lateral pressure. The scaler is machined from surgical-grade stainless steel and mounted on a solid knurled handle that offers reliable wet grip across long prophylaxis appointments. The instrument is fully autoclavable and supplied non-sterile for routine clinic sterilisation. Equate Instruments hand-finishes each cutting edge so the 204SD retains consistent geometry across many reprocessing cycles.
Universal Implant-Maintenance Curette M23 - Titanium-Coated
The Universal Curette M23 is a titanium-coated double-ended instrument designed for supra- and subgingival scaling around natural teeth and implant-supported restorations. Its paired universal blades allow scaling in both mesial and distal directions from a single working end, and the titanium nitride-style coating on the tips reduces scratching of titanium abutment surfaces during implant maintenance. The slim shank profile reaches tight interdental spaces and deep periodontal pockets. The curette is mounted on a lightweight knurled hollow handle with colour-banded tactile rings for a stable wet grip, and the whole instrument is fully autoclavable. Equate Instruments hand-finishes each working edge so the M23 pattern retains predictable geometry across many sterilisation cycles.
M23 Sickle Scaler
The M23 is a double-ended posterior sickle scaler engineered for efficient removal of supragingival and interproximal calculus on molars and premolars. Its paired working ends terminate in pointed, trapezoidal blades with two cutting edges each, letting the clinician adapt to mesial and distal line angles across an entire posterior sextant without switching instruments. The shank is balanced for fine tactile feedback, and the blades are ground to hold an edge through sustained scaling strokes. This variant features a lightweight metallic handle with a titanium-finish and blue colour-coded rings that aid tray identification. Supplied non-sterile from Equate Instruments for in-clinic processing in pouches or cassettes.
Periodontal Probe CP12/#23 - Solid Knurled Handle
The Periodontal Probe CP12/#23 is a double-ended diagnostic instrument used to measure periodontal pocket depth and assess clinical attachment levels, paired with a #23 shepherd-hook explorer for caries detection. The CP12 working end carries classic colour-banded markings at 3, 6, 9 and 12 mm for rapid pocket charting, while the opposite end offers a fine curved explorer tip for tactile detection of carious lesions and margin integrity. Both working ends are machined from surgical-grade stainless steel and ground to a consistent profile so markings read reliably throughout reprocessing. The solid knurled handle delivers a stable grip during probing, and the instrument is fully autoclavable between patients. Equate Instruments finishes each probe by hand to keep mm graduations and the explorer tip predictable across the clinical life of the instrument.
Universal Curette Fig. 413/414 - Solid Knurled Handle
The Universal Curette Fig. 413/414 is a double-ended periodontal scaling and debridement instrument designed for routine supragingival and subgingival calculus removal around anterior, premolar and molar teeth. Each working end carries a paired universal blade ground to two parallel cutting edges, which lets a single end scale both mesial and distal surfaces of a tooth. The slim solid shanks give access to deep pockets without over-distending the gingival sulcus. Machined from surgical-grade stainless steel and mounted on a solid knurled handle, the instrument offers a confident wet grip across longer periodontal appointments. It is fully autoclavable and supplied non-sterile for routine clinic reprocessing. Equate Instruments hand-finishes each cutting edge so the Fig. 413/414 keeps stable scaling geometry.
