Semken-Taylor Tissue Forceps Straight 1x2 Teeth 12cm
The Semken-Taylor 1x2 teeth tissue forceps are a 12 cm locking-grip soft-tissue holder with interlocking rat-tooth tips. One jaw carries a single tooth and the opposing jaw carries two, so the teeth mesh precisely when the jaws close for a secure, non-slip hold on tough or slippery tissue. Built from stainless steel with a ribbed straight handle for confident finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this 1x2 teeth pattern to oral surgeons, periodontists, and general dentists who need a firm, non-slipping grip during suturing, extractions, and flap approximation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Taylor Dressing Forceps Straight 15 cm
The Taylor Dressing Forceps Straight 15 cm is a thumb forceps with straight cross-hatched serrated jaws, configured to hold gauze, cotton rolls, paper points and small dressings without slipping. The toothless serrated tip grips soft materials firmly while remaining atraumatic to mucosa and sutured tissue. Machined from stainless steel with longitudinally-ribbed grip pads on each arm, the instrument offers a confident pen or thumb grip and a consistent return to neutral through many cycles. Supplied non-sterile and fully autoclavable, it is a dependable dressing companion in the Equate Instruments oral-surgery and restorative ranges.
View
Semken Tissue Forceps Straight
The Semken tissue forceps are straight soft-tissue holders designed for handling flaps, gingiva, and mucosa during dental suturing and oral surgical procedures. Fine serrations along the working tips grip tissue firmly without the crushing associated with 1x2 teeth, making them a dependable choice for flap approximation and needle-side retraction. Forged from stainless steel and finished with a ribbed stainless handle, the forceps are fully autoclavable and delivered non-sterile for the clinic's own sterilisation workflow. Equate Instruments positions this Semken pattern as an everyday soft-tissue holder for oral surgery, periodontal flap work, and routine suturing tasks.
View
Semken-Taylor Tissue Forceps Straight Serrated 12cm
The Semken-Taylor straight tissue forceps are a 12 cm soft-tissue holder with fine serrations along the inner working tips. The serrated pattern grips gingiva, flaps, and suture material securely while avoiding the tissue crush produced by 1x2 or rat-tooth designs, making it a practical day-to-day pick-up during dental suturing and oral surgery. Made from stainless steel with a ribbed straight handle for a positive finger grip, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this Semken-Taylor pattern for periodontists, oral surgeons, and general dentists who handle soft tissue around sutures and flap closures.
View
Semken-Taylor Tissue Forceps Curved Serrated 12cm
The Semken-Taylor curved tissue forceps are a 12 cm soft-tissue holder with gently curved tips and fine serrations along the inner jaws. The curve improves line of sight to posterior working areas and angled suture sites, while the serrations grip tissue securely without the crush produced by 1x2 teeth. Forged from stainless steel with a ribbed straight handle for confident finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this curved Semken-Taylor pattern for periodontists, oral surgeons, and general dentists who need angled access to gingiva and suture sites.
View
Semken Tissue Forceps Angled
The Semken angled tissue forceps are soft-tissue holders with sharply bent working tips that redirect access around obstructing anatomy and posterior teeth. The angled jaws allow the clinician to reach suture sites behind cusps and distal flaps without repositioning the hand, while fine inner serrations grip gingiva and flap margins without crushing. Built from stainless steel with a ribbed straight handle, the forceps are fully autoclavable and delivered non-sterile for standard in-clinic reprocessing. Equate Instruments offers this angled Semken pattern to oral surgeons, periodontists, and general dentists who frequently work in distal and posterior surgical fields.
View
Semken-Taylor Tissue Forceps Curved 1x2 Teeth 12cm
The Semken-Taylor curved 1x2 teeth tissue forceps are a 12 cm soft-tissue holder with bent working tips and interlocking rat-tooth jaws. The curve opens up line of sight at posterior and distal suture sites while the single-over-double tooth arrangement secures tough or slippery tissue against slipping. Forged from stainless steel with a ribbed straight handle for dependable finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this curved 1x2 pattern for oral surgeons, periodontists, and general dentists who need an angled, non-slip grip around molars, distal flaps, and extraction sites.
View
Dissecting Forceps 1x2 Teeth 14.5cm
The 14.5 cm dissecting forceps are a substantial tissue-holding instrument with interlocking 1x2 rat-tooth tips for firm, non-slip grip on tough tissue during surgical dissection and suturing. The longer shaft extends reach into deeper oral and maxillofacial surgical fields while the rat-tooth jaws keep flap margins, muscle, and fascia stable under tension. Forged from stainless steel with a broad ribbed handle for positive finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this dissecting pattern to oral surgeons and implantologists who work in deeper tissue planes and need a reliable toothed pickup.
View
Micro Surgical Tweezer 1x2 Teeth Straight 18cm
The 18 cm micro-surgical tweezer is a long-shaft tissue holder engineered for fine control in deep and confined surgical fields. Slim, tapered tips carry a precise 1x2 interlocking tooth pattern that grips delicate soft tissue, suture material, and small fragments without slipping, while the extended 18 cm length helps the clinician work at a distance without obstructing the view. The handle combines a dimpled stainless-steel grip with a tungsten-carbide-inlaid working section for long-term wear resistance. The tweezer is fully autoclavable and delivered non-sterile. Equate Instruments recommends it for oral surgeons and implantologists performing micro-surgical work where control in tight spaces matters.
View
Micro Surgical Tweezer 1x2 Teeth Curved 18cm
The 18 cm curved micro-surgical tweezer is a long-shaft tissue holder with gently bent jaws and a fine 1x2 interlocking tooth pattern. The curve clears the line of sight to deep and posterior surgical sites while the interlocking teeth grip delicate tissue, suture material, and small fragments without slipping. A dimpled stainless-steel handle with a micro-surgical grip keeps fine control steady across long cases. The tweezer is fully autoclavable and supplied non-sterile. Equate Instruments recommends it for oral surgeons and implantologists performing angled micro-surgical work where a straight jaw would obstruct the view.
View
Anatomic Micro Surgical Tweezer
The anatomic micro-surgical tweezer is a slim, extended-shaft tissue holder with smooth working tips for atraumatic control of delicate soft tissue in fine surgical fields. The smooth anatomic tips grip mucosa, fascia, and micro-sutures without puncture marks, making it a suitable choice for tissue handling where tooth patterns would cause unwanted trauma. The handle is stainless steel with ring-patterned grip sections for precise finger positioning during micro-surgical work. The instrument is fully autoclavable and supplied non-sterile. Equate Instruments recommends it for oral surgeons, implantologists, and periodontists performing fine, tissue-sparing procedures.
View
Micro Surgery Tweezer 1x2 Teeth 15cm
The 15 cm micro-surgery tweezer is a slim tissue-handling instrument with fine tapered tips carrying an interlocking 1x2 tooth pattern. The teeth deliver a positive, non-slip grip on delicate tissue, suture material, and small fragments during micro-surgical procedures, while the slim shaft preserves a clear view of the working area. A knurled stainless-steel handle provides secure finger control for fine movements. The tweezer is fully autoclavable and supplied non-sterile. Equate Instruments offers this 15 cm 1x2 micro pattern to oral surgeons, implantologists, and periodontists performing fine tissue work.
View
Adson Tissue Forceps 12 cm with Tungsten-Carbide Tips
The Adson Tissue Forceps 12 cm with Tungsten-Carbide Tips is a surgical tweezer for atraumatic soft-tissue handling during suturing and flap management. The 1x2 rat-tooth working tips interlock to hold tissue without slippage, while tungsten-carbide inserts give the jaws extended edge life and a more precise grip than conventional stainless tips. The tapered body carries deep fine-serrated gripping panels, letting the operator pinch the forceps closed and release with one hand through long suturing sequences. A gold-toned grip area identifies the tungsten-carbide version at a glance on the tray. Crafted in surgical stainless steel by Equate Instruments for fully autoclavable reprocessing.
View
