Spare Parts Kit for Ivory-Pattern Rubber Dam Punch
This spare-parts kit from Equate Instruments provides the wear components needed to service an Ivory-pattern rubber dam punch. The kit includes the hardened punch pin, the indexed punch wheel with calibrated hole sizes, a replacement rubber pad, and the compression springs that reset the pin between cuts. Replacing the pin and wheel regularly keeps the edges of punched holes clean and burr-free, which preserves the seal of the rubber dam around each tooth. All metal components are stainless steel and can be autoclaved alongside the repaired punch. Keep one kit in the sterilisation area as planned preventative maintenance for any busy restorative or endodontic practice.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Full Arch Articulating Paper Holder 14cm
The 14 cm Full Arch Articulating Paper Holder is a one-piece U-shaped instrument used to present articulating paper across the entire dental arch in a single bite. The two curved arms carry a row of pin-retainers that grip the paper along its length, keeping it flat and unfolded so contact marks appear cleanly on the occlusal surfaces. A thumb-screw at the junction of the arms clamps the paper once it is threaded through the pin row, and the single straight handle keeps the clinician's fingers out of the occlusal field while the patient bites. Stainless-steel construction is corrosion-resistant, fully autoclavable, and supplied non-sterile. A chairside workflow tool from Equate Instruments.
View
Cavity Filler Tube
The Cavity Filler Tube is a specialty wire-form hand instrument featuring a circular finger-ring handle, paired mid-shaft retention curves, and a slim tapered shaft. The ring handle provides positive single-digit control, while the curved mid-shaft profile is designed to carry or direct fine materials during delicate restorative placement in confined operative fields. Manufactured from polished stainless steel and fully autoclavable, this Equate Instruments tool is supplied non-sterile so the clinic can reprocess it alongside its restorative cassette in pouches or sterilisation trays.
View
Taylor Dressing Forceps Straight 15 cm
The Taylor Dressing Forceps Straight 15 cm is a thumb forceps with straight cross-hatched serrated jaws, configured to hold gauze, cotton rolls, paper points and small dressings without slipping. The toothless serrated tip grips soft materials firmly while remaining atraumatic to mucosa and sutured tissue. Machined from stainless steel with longitudinally-ribbed grip pads on each arm, the instrument offers a confident pen or thumb grip and a consistent return to neutral through many cycles. Supplied non-sterile and fully autoclavable, it is a dependable dressing companion in the Equate Instruments oral-surgery and restorative ranges.
View
Krane-Kaplan Angled Dental Tweezers 15cm
The Krane-Kaplan 15 cm Tweezer is a slim angled dental tweezer used in general operative and periodontal workflows to lift and hold small delicate objects and soft materials. Fine curved beaks carry longitudinal inner serrations that hold cotton, gauze and small accessory items without slipping, while the long ribbed handle provides a stable one-handed hold across extended appointments. Manufactured by Equate Instruments from surgical stainless steel, the instrument is fully autoclavable and supplied non-sterile for in-office sterilisation in pouches or cassettes.
View
Krane Kaplan Dental Tweezer 15cm
The Krane Kaplan dental tweezer is a 15 cm chairside instrument for transferring cotton pellets, small restorative materials, and tissue fragments into and out of the oral cavity. Its curved working ends terminate in finely cross-serrated tips that grip firmly without crushing soft consumables, while the longitudinally ribbed central grip keeps control steady in wet gloved hands. Crafted from surgical stainless steel with a reliable spring tension that survives repeated autoclave cycles, this Equate Instruments tweezer is a daily-driver for restorative, hygiene, and diagnostic chairsides. Supplied non-sterile so it can be processed with the rest of the cassette, the tweezer balances forward of the grip for fine-motor control during pellet placement and retrieval.
View
Semken Tissue Forceps Straight
The Semken tissue forceps are straight soft-tissue holders designed for handling flaps, gingiva, and mucosa during dental suturing and oral surgical procedures. Fine serrations along the working tips grip tissue firmly without the crushing associated with 1x2 teeth, making them a dependable choice for flap approximation and needle-side retraction. Forged from stainless steel and finished with a ribbed stainless handle, the forceps are fully autoclavable and delivered non-sterile for the clinic's own sterilisation workflow. Equate Instruments positions this Semken pattern as an everyday soft-tissue holder for oral surgery, periodontal flap work, and routine suturing tasks.
View
Semken-Taylor Tissue Forceps Straight Serrated 12cm
The Semken-Taylor straight tissue forceps are a 12 cm soft-tissue holder with fine serrations along the inner working tips. The serrated pattern grips gingiva, flaps, and suture material securely while avoiding the tissue crush produced by 1x2 or rat-tooth designs, making it a practical day-to-day pick-up during dental suturing and oral surgery. Made from stainless steel with a ribbed straight handle for a positive finger grip, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this Semken-Taylor pattern for periodontists, oral surgeons, and general dentists who handle soft tissue around sutures and flap closures.
View
Semken-Taylor Tissue Forceps Curved Serrated 12cm
The Semken-Taylor curved tissue forceps are a 12 cm soft-tissue holder with gently curved tips and fine serrations along the inner jaws. The curve improves line of sight to posterior working areas and angled suture sites, while the serrations grip tissue securely without the crush produced by 1x2 teeth. Forged from stainless steel with a ribbed straight handle for confident finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this curved Semken-Taylor pattern for periodontists, oral surgeons, and general dentists who need angled access to gingiva and suture sites.
View
Semken Tissue Forceps Angled
The Semken angled tissue forceps are soft-tissue holders with sharply bent working tips that redirect access around obstructing anatomy and posterior teeth. The angled jaws allow the clinician to reach suture sites behind cusps and distal flaps without repositioning the hand, while fine inner serrations grip gingiva and flap margins without crushing. Built from stainless steel with a ribbed straight handle, the forceps are fully autoclavable and delivered non-sterile for standard in-clinic reprocessing. Equate Instruments offers this angled Semken pattern to oral surgeons, periodontists, and general dentists who frequently work in distal and posterior surgical fields.
View
Semken-Taylor Tissue Forceps Straight 1x2 Teeth 12cm
The Semken-Taylor 1x2 teeth tissue forceps are a 12 cm locking-grip soft-tissue holder with interlocking rat-tooth tips. One jaw carries a single tooth and the opposing jaw carries two, so the teeth mesh precisely when the jaws close for a secure, non-slip hold on tough or slippery tissue. Built from stainless steel with a ribbed straight handle for confident finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this 1x2 teeth pattern to oral surgeons, periodontists, and general dentists who need a firm, non-slipping grip during suturing, extractions, and flap approximation.
View
Semken-Taylor Tissue Forceps Curved 1x2 Teeth 12cm
The Semken-Taylor curved 1x2 teeth tissue forceps are a 12 cm soft-tissue holder with bent working tips and interlocking rat-tooth jaws. The curve opens up line of sight at posterior and distal suture sites while the single-over-double tooth arrangement secures tough or slippery tissue against slipping. Forged from stainless steel with a ribbed straight handle for dependable finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this curved 1x2 pattern for oral surgeons, periodontists, and general dentists who need an angled, non-slip grip around molars, distal flaps, and extraction sites.
View
Dissecting Forceps 1x2 Teeth 14.5cm
The 14.5 cm dissecting forceps are a substantial tissue-holding instrument with interlocking 1x2 rat-tooth tips for firm, non-slip grip on tough tissue during surgical dissection and suturing. The longer shaft extends reach into deeper oral and maxillofacial surgical fields while the rat-tooth jaws keep flap margins, muscle, and fascia stable under tension. Forged from stainless steel with a broad ribbed handle for positive finger control, the forceps are fully autoclavable and supplied non-sterile. Equate Instruments offers this dissecting pattern to oral surgeons and implantologists who work in deeper tissue planes and need a reliable toothed pickup.
View
