Mouth Mirror Handle - Hollow Hexagonal 8 mm
The Mouth Mirror Handle, 8 mm hollow hexagonal, is a slim reusable handle for dental front-surface mirror heads. The slimmer 8 mm diameter suits clinicians who prefer a fine-tipped pen-hold grip, while the hexagonal cross-section resists rolling on a surface tray and gives the fingertips a positive locating grip without a bulky body. The hollow stainless steel construction is significantly lighter than a solid handle, reducing fingertip fatigue during prolonged examination, restorative, and endodontic appointments. A threaded cone socket at the working end accepts standard dental mirror heads (sizes 3 through 6) so a single handle serves multiple mirror sizes across chairside workflows. Manufactured by Equate Instruments from high-grade stainless steel, it is fully autoclavable and supplied non-sterile for routine in-clinic sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Ortho Mirror Handle 25 mm with Measurement Scale
The Ortho Mirror Handle 25 mm is a slim single-ended mirror handle designed for orthodontic and intra-oral photography workflows. Its stainless-steel shaft carries a 25 mm millimetre scale that gives the clinician a built-in reference when positioning brackets, checking archwire extension, or documenting an intra-oral site for records. The handle accepts standard threaded mouth mirror heads for indirect vision and reflection photography, and the slim silicone grip improves access to the buccal surfaces of posterior teeth where a bulkier handle would crowd a cheek retractor or photo mirror. The stainless-steel components are fully autoclavable, and mirror heads are sold separately.
View
Mouth Mirror Handle - Hollow Hexagonal 8 mm
The Mouth Mirror Handle, 8 mm hollow hexagonal, is a slim reusable handle for dental front-surface mirror heads. The slimmer 8 mm diameter suits clinicians who prefer a fine-tipped pen-hold grip, while the hexagonal cross-section resists rolling on a surface tray and gives the fingertips a positive locating grip without a bulky body. The hollow stainless steel construction is significantly lighter than a solid handle, reducing fingertip fatigue during prolonged examination, restorative, and endodontic appointments. A threaded cone socket at the working end accepts standard dental mirror heads (sizes 3 through 6) so a single handle serves multiple mirror sizes across chairside workflows. Manufactured by Equate Instruments from high-grade stainless steel, it is fully autoclavable and supplied non-sterile for routine in-clinic sterilisation.
View
Mouth Mirror Handle - Hollow 10 mm
The Mouth Mirror Handle, 10 mm hollow, is a lightweight reusable handle for dental front-surface mirror heads. The hollow stainless steel body is significantly lighter than a solid handle and reduces fingertip fatigue during prolonged examination, restorative, and endodontic appointments. The 10 mm grip diameter provides a comfortable full-fingered hold for indirect vision work across adult and pediatric patients. A threaded cone socket at the working end accepts standard dental mirror heads (sizes 3 through 6) so a single handle serves multiple mirror sizes across chairside workflows. Manufactured by Equate Instruments from high-grade stainless steel, it is fully autoclavable and supplied non-sterile for routine in-clinic sterilisation.
View
Mirror Handle Grey 12.5 cm
The Mirror Handle is a single-ended diagnostic instrument that accepts a standard cone-socket mouth-mirror head for indirect vision, soft-tissue retraction, and oral-cavity illumination. Its balanced construction supports a relaxed pen grasp through long examinations, and the coloured finish helps operatories and hygienists identify instrument sets at a glance during chairside changeovers. This handle from Equate Instruments is fully autoclavable and corrosion-resistant, fitting any standard cone-socket mouth mirror (head sold separately). It is supplied non-sterile for in-clinic steam processing and integrates into routine examination trays, hygiene cassettes, and orthodontic set-ups.
View
Round Solid Mirror Handle 6 mm
The Round Solid Mirror Handle is a single-ended hand instrument engineered to hold standard cone-socket mouth mirror heads. Its threaded tip accepts interchangeable mirror faces, letting the clinician swap between magnifying, rhodium, and double-sided heads without replacing the entire instrument. Fabricated by Equate Instruments from hardened stainless steel with a 6 mm round solid body and a fine-ribbed grip section, the handle delivers balanced weight and confident control during oral examination and indirect vision work. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Mirror Handle, Yellow
The Mirror Handle is a single-ended diagnostic instrument that accepts a standard cone-socket mouth-mirror head for indirect vision, soft-tissue retraction, and oral-cavity illumination. Its balanced construction supports a relaxed pen grasp through long examinations, and the coloured finish helps operatories and hygienists identify instrument sets at a glance during chairside changeovers. This handle from Equate Instruments is fully autoclavable and corrosion-resistant, fitting any standard cone-socket mouth mirror (head sold separately). It is supplied non-sterile for in-clinic steam processing and integrates into routine examination trays, hygiene cassettes, and orthodontic set-ups.
View
Mirror Handle - Special Blue
This single-ended dental mirror handle is finished in a vivid Special Blue silicone grip and is designed to accept standard threaded mouth mirror heads. It is used throughout oral diagnostics, restorative, and hygiene procedures to hold the mirror while the clinician inspects the oral cavity, reflects light into a site, or retracts soft tissues. The textured silicone grip gives a secure hold even with wet gloves, and the contoured shape shifts easily between pen and palm grasps. The stainless-steel stem and threaded tip are fully autoclavable so the handle stays in active rotation through a busy clinic day. Mouth mirror heads are sold separately.
View
Mirror Handle, Red
The Mirror Handle is a single-ended diagnostic instrument that accepts a standard cone-socket mouth-mirror head for indirect vision, soft-tissue retraction, and oral-cavity illumination. Its balanced construction supports a relaxed pen grasp through long examinations, and the coloured finish helps operatories and hygienists identify instrument sets at a glance during chairside changeovers. This handle from Equate Instruments is fully autoclavable and corrosion-resistant, fitting any standard cone-socket mouth mirror (head sold separately). It is supplied non-sterile for in-clinic steam processing and integrates into routine examination trays, hygiene cassettes, and orthodontic set-ups.
View
Mirror Handle - Radiant Orchid
This single-ended dental mirror handle is finished in a bright Radiant Orchid purple silicone grip and is designed to accept standard threaded mouth mirror heads. It is used throughout oral diagnostics, restorative, and hygiene procedures to hold the mirror while the clinician inspects the oral cavity, reflects light into a site, or retracts soft tissues. The textured silicone grip gives a secure hold even with wet gloves, and the contoured shape transitions easily between pen and palm grasps. The stainless-steel stem and threaded tip are fully autoclavable so the handle stays in active rotation through a busy clinic day. Mouth mirror heads are sold separately.
View
Mirror Handle - Serenity
This single-ended dental mirror handle is finished in a soft Serenity blue silicone grip and is designed to accept standard threaded mouth mirror heads. It is used throughout oral diagnostics, restorative, and hygiene procedures to hold the mirror while the clinician inspects the oral cavity, reflects light into a site, or retracts soft tissues. The textured silicone grip gives a secure hold even with wet gloves, and the contoured shape transitions easily between pen and palm grasps. The stainless-steel stem and threaded tip are fully autoclavable so the handle stays in active rotation through a busy clinic day. Mouth mirror heads are sold separately.
View
Mirror Handle, Light Green
The Mirror Handle is a single-ended diagnostic instrument that accepts a standard cone-socket mouth-mirror head for indirect vision, soft-tissue retraction, and oral-cavity illumination. Its balanced construction supports a relaxed pen grasp through long examinations, and the coloured finish helps operatories and hygienists identify instrument sets at a glance during chairside changeovers. This handle from Equate Instruments is fully autoclavable and corrosion-resistant, fitting any standard cone-socket mouth mirror (head sold separately). It is supplied non-sterile for in-clinic steam processing and integrates into routine examination trays, hygiene cassettes, and orthodontic set-ups.
View
Mirror Handle - Storm Grey
This single-ended dental mirror handle is finished in a neutral Storm Grey silicone grip and is designed to accept standard threaded mouth mirror heads. It is used throughout oral diagnostics, restorative, and hygiene procedures to hold the mirror while the clinician inspects the oral cavity, reflects light into a site, or retracts soft tissues. The textured silicone grip gives a secure hold even with wet gloves, and the contoured shape transitions easily between pen and palm grasps. The stainless-steel stem and threaded tip are fully autoclavable so the handle stays in active rotation through a busy clinic day. Mouth mirror heads are sold separately.
View
