X-Ray Film Hanger - 6 Clips
The X-Ray Film Hanger is a stainless steel processing rack used to suspend intraoral radiograph films during chemical development and drying. Three horizontal cross-bars each carry two spring-loaded clips, giving six clip stations for holding periapical and bitewing film packets through the developer, fixer, and wash sequence. The vertical spine terminates in a hook that suspends the rack from a developer tank rail or a drying line, and the stainless construction resists corrosion from processing chemistries. The hanger is suitable for analog darkrooms and for inventories that maintain film-based radiography alongside digital workflows. Supplied non-sterile from Equate Instruments.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
X-Ray Film Clip - Single Hook
The Single X-Ray Film Clip is a spring-action darkroom clip used to hang developed dental radiographs on drying racks and light boxes. A sprung jaw at the base grips the film or intra-oral sensor sleeve without pinching through the emulsion, while an upper hook catches the rack wire so the film hangs flat for even drying and easy reading. Stamped from a single piece of stainless steel, the clip is corrosion-resistant in the wet darkroom environment and tolerates both hot and cold processing chemistries. Fully autoclavable and supplied non-sterile. A workhorse darkroom and diagnostic accessory from Equate Instruments.
View
X-Ray Film Hanger - 10 Clips
The X-Ray Film Hanger is a stainless steel processing rack used to suspend intraoral radiograph films during chemical development and drying. Five horizontal cross-bars each carry two spring-loaded clips, giving ten clip stations for holding periapical and bitewing film packets through the developer, fixer, and wash sequence. The vertical spine terminates in a hook that suspends the rack from a developer tank rail or a drying line, and the stainless construction resists corrosion from processing chemistries. The hanger is suitable for analog darkrooms and for inventories that maintain film-based radiography alongside digital workflows. Supplied non-sterile from Equate Instruments.
View
X-Ray Film Hanger - 14 Clips
The X-Ray Film Hanger is a stainless steel processing rack used to suspend intraoral radiograph films during chemical development and drying. Seven horizontal cross-bars each carry two spring-loaded clips, giving fourteen clip stations for holding periapical and bitewing film packets through the developer, fixer, and wash sequence. The vertical spine terminates in a hook that suspends the rack from a developer tank rail or a drying line, and the stainless construction resists corrosion from processing chemistries. The hanger is suitable for analog darkrooms and for inventories that maintain film-based radiography alongside digital workflows. Supplied non-sterile from Equate Instruments.
View
Front Surface Mouth Mirror (SS) - No. 3
The Front Surface Mouth Mirror No. 3 is a single-ended, plain-stem diagnostic mirror for intraoral indirect vision, illumination of dark regions, and retraction of the cheeks, lips, and tongue. The front-surface reflective layer sits on the anterior face of the glass disc, so the reflected image is free of the ghosted double-image produced by conventional rear-surface mirrors - an important clarity advantage for caries diagnosis and restorative margin checks. A standard threaded shank screws into any ISO-compatible mirror handle, and the No. 3 disc size suits adult intraoral work without feeling oversized in anterior access. Manufactured from stainless steel, this Equate Instruments mirror head is fully autoclavable and supplied non-sterile for standard cassette processing.
View
Standard Mouth Mirror (SS) - No. 3 (12 pcs)
The Standard Mouth Mirror No. 3 is a single-ended, plain-stem diagnostic mirror for intraoral indirect vision, illumination of dark regions, and retraction of the cheeks, lips, and tongue. The reflective layer sits behind the glass disc in the classic rear-surface configuration, giving the bright, familiar mirror image that most operators learn on. A standard threaded shank screws into any ISO-compatible mirror handle. Supplied as a 12-piece practice-pack, this Equate Instruments mirror head is manufactured from stainless steel for corrosion resistance and full autoclave compatibility. The No. 3 disc size suits adult intraoral work without feeling oversized in anterior access, and the low-profile simple stem keeps the line of sight clear. Supplied non-sterile for standard cassette processing.
View
Mouth Mirror No. 4 - Rhodium Front Surface, 22 mm, Universal Thread
The Mouth Mirror No. 4 features a 22 mm rhodium-coated front-surface reflective layer that produces a sharp, distortion-free image of tooth and soft-tissue surfaces. The front-surface design eliminates the double image produced by back-silvered glass mirrors, improving indirect vision during restorative, periodontal, endodontic, and pediatric procedures. The 22 mm head is a general-purpose size that suits adult and pediatric intraoral work across exam, restorative, and hygiene appointments. Rhodium coating resists corrosion and tarnish through repeated steam sterilisation cycles, preserving image clarity over hundreds of autoclave runs. Manufactured by Equate Instruments, the mirror head is fully autoclavable and supplied non-sterile for routine in-clinic sterilisation.
View
Mouth Mirror No.4 Plain 22mm Universal (10 pcs)
A replacement dental mouth mirror head used for indirect vision during restorative and diagnostic procedures, soft-tissue retraction, and illumination of the oral cavity. The stainless-steel frame holds a polished reflective surface for clear, distortion-free imaging of posterior teeth and hard-to-access intraoral surfaces. Supplied from Equate Instruments, the mirror head threads onto a standard reusable dental mirror handle, and the full stainless-steel construction allows routine autoclave sterilisation between patients. The threaded shank is sized to fit the clinic's existing handle inventory, supporting efficient high-volume use in general dentistry, hygiene, and examination workflows.
View
Mouth Mirror No.4 Plain 22mm Universal (12 pcs)
A replacement dental mouth mirror head used for indirect vision during restorative and diagnostic procedures, soft-tissue retraction, and illumination of the oral cavity. The stainless-steel frame holds a polished reflective surface for clear, distortion-free imaging of posterior teeth and hard-to-access intraoral surfaces. Supplied from Equate Instruments, the mirror head threads onto a standard reusable dental mirror handle, and the full stainless-steel construction allows routine autoclave sterilisation between patients. The threaded shank is sized to fit the clinic's existing handle inventory, supporting efficient high-volume use in general dentistry, hygiene, and examination workflows.
View
Mouth Mirror No. 5 - Rhodium Front Surface, 24 mm, Universal Thread
The Mouth Mirror No. 5 features a 24 mm rhodium-coated front-surface reflective layer that produces a sharp, distortion-free image of tooth and soft-tissue surfaces. The front-surface design eliminates the double image produced by back-silvered glass mirrors, improving indirect vision during restorative, periodontal, endodontic, and implant workflows. The 24 mm head is the most widely used adult intraoral size, wide enough to capture buccal, lingual, and occlusal surfaces in a single view and compact enough to navigate past the cheeks and tongue without stretching the soft tissues. Rhodium coating resists corrosion and tarnish through repeated steam sterilisation cycles. Manufactured by Equate Instruments, the mirror head is fully autoclavable and supplied non-sterile for routine in-clinic sterilisation.
View
Mouth Mirror No.5 Plain 24mm Universal (10 pcs)
A replacement dental mouth mirror head used for indirect vision during restorative and diagnostic procedures, soft-tissue retraction, and illumination of the oral cavity. The stainless-steel frame holds a polished reflective surface for clear, distortion-free imaging of posterior teeth and hard-to-access intraoral surfaces. Supplied from Equate Instruments, the mirror head threads onto a standard reusable dental mirror handle, and the full stainless-steel construction allows routine autoclave sterilisation between patients. The threaded shank is sized to fit the clinic's existing handle inventory, supporting efficient high-volume use in general dentistry, hygiene, and examination workflows.
View
Mouth Mirror No.5 Plain 24mm Universal (12 pcs)
A replacement dental mouth mirror head used for indirect vision during restorative and diagnostic procedures, soft-tissue retraction, and illumination of the oral cavity. The stainless-steel frame holds a polished reflective surface for clear, distortion-free imaging of posterior teeth and hard-to-access intraoral surfaces. Supplied from Equate Instruments, the mirror head threads onto a standard reusable dental mirror handle, and the full stainless-steel construction allows routine autoclave sterilisation between patients. The threaded shank is sized to fit the clinic's existing handle inventory, supporting efficient high-volume use in general dentistry, hygiene, and examination workflows.
View
ExPro Explorer 23 / CP-12 Probe - Solid Stainless Handle
The ExPro Explorer 23 / CP-12 Probe is a double-ended diagnostic instrument that combines a shepherd hook Explorer 23 tip at one end with a calibrated CP-12 periodontal probe at the other. The Explorer 23 is used for caries detection on smooth and interproximal surfaces and for contouring composite restorations. The CP-12 probe is marked at 3, 6, 9, and 12 mm for charting pocket depths, recession, and attachment level during a periodontal examination. The instrument is built on a solid stainless steel handle with a knurled grip for balanced tactile control, and the full construction is autoclavable and supplied non-sterile for in-clinic steam sterilisation. It is part of the Equate Instruments diagnostic range.
View
