Bone Graft Compactor and Graduated Probe - 6.1 mm Scoop, Double-Ended
This double-ended bone instrument combines a 6.1 mm collection scoop with a graduated measurement probe, so the clinician can lift, carry, and place particulate graft while also gauging socket depth or osteotomy length during implant preparation. The small spoon end is sized to pick up morselised autograft or xenograft and tamp it into extraction sockets and sinus windows. The opposite end is a millimetre-marked probe with banded depth lines, useful for verifying graft depth or residual bone height before condensing further material. Both tips sit on a knurled hollow stainless-steel handle that stays light in the hand during long grafting appointments. Manufactured by Equate Instruments from surgical stainless steel and fully autoclavable.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Bone Graft Packer 3.3/4 mm - Anatomical Hollow Handle 10 mm
The Bone Graft Packer is a double-ended stainless-steel condenser used to deliver and compact particulate bone graft material into osteotomies and extraction sockets during implant site development. One tip measures 3.3 mm and the other 4 mm, matching the shank diameters of standard implant systems so graft is packed around the future implant without over- or under-filling the site. Each tip carries shallow calibration grooves to gauge packing depth. The 10 mm anatomical hollow handle has three ergonomic grip zones for a fatigue-reducing fulcrum, and the slim offset shanks reach posterior sites where a straight packer would be blocked by the opposing arch. Equate Instruments supplies the packer non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Bone Graft Carrier 2-4-6-8-10 mm - Anatomical Hollow Handle 10 mm
This double-ended bone graft carrier combines a delivery end and a packing end on a single instrument so the surgeon can transfer particulate graft from a mixing bowl to the recipient site and compact it without swapping tools. The delivery tip is calibrated at 2, 4, 6, 8 and 10 mm so the operator can measure the graft column as it is placed, while the opposite end carries a curved scoop for condensing graft against bone walls. The 10 mm anatomical hollow handle has three ergonomic grip zones for a fatigue-reducing fulcrum, and the offset shanks reach both anterior and posterior sites. Equate Instruments supplies the carrier non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Miller 8 Surgical Bone Curette - Titanium-Coated Hollow Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
View
Molt 9 Periosteal Elevator, 4mm/7mm Ends, Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
