Contra-Angle Apical Elevator 3 mm with Anatomical Finger Handle
This 3 mm contra-angle apical elevator carries a sharp working blade on a shaft that bends back toward the operator, so the tip can reach fragments tucked behind the visible socket wall or under the gingival collar without levering against the adjacent tooth. The anatomical finger-grip hollow handle sits between the thumb and index-middle fingers for precise rotational control during ligament severance and fragment luxation. Pressed as a single piece of surgical stainless steel by Equate Instruments, the elevator is fully autoclavable and supplied non-sterile for in-clinic processing. It pairs well with the straight and angled variants to cover all approaches during atraumatic extractions.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Serrated Apical Elevator 4mm - Stainless Steel Handle
This serrated apical elevator is a slim, single-ended luxating instrument for elevating retained root fragments and fractured apical tips. The fine stainless-steel working tip is machined with transverse serrations so it bites into sclerotic dentine and gutta-percha, letting the surgeon transmit controlled rotational force without the tip skating out of the socket. The solid stainless-steel teardrop handle is polished for easy decontamination and weighted for balanced pen-grip control. Equate Instruments supplies the elevator non-sterile for in-clinic sterilisation; the instrument is fully autoclavable and retains its edge across repeated cycles.
View
Apical Straight Elevator 4mm - Gold-Tone Tip
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 2mm
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 2mm - Gold-Tone Tip
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 3mm
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 3mm - Gold-Tone Tip
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 4mm
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 4mm - Gold-Tone Tip
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 2mm
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 2mm - Gold-Tone Tip
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 3mm
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
Apical Straight Elevator 3mm - Gold-Tone Tip
This straight elevator is designed for the luxation and controlled mobilisation of tooth roots and retained root tips during surgical extractions. The working shank is ground to a blade that engages between the root surface and the alveolar crest, allowing a wheel-and-axle motion to disrupt periodontal ligament fibres and widen the socket wall. Crafted by Equate Instruments from surgical-grade stainless steel and polished for repeat autoclave cycles, this elevator is part of a straight elevator set used alongside forceps during routine and complex surgical extractions. The stainless-steel handle is profiled to seat securely in a palm grip and resist rotation under thumb pressure during controlled leveraging. Supplied non-sterile for in-clinic steam sterilisation.
View
