Curved Bone Scraper, 15.5 cm
The Curved Bone Scraper harvests thin shavings of autogenous cortical bone for use as graft material during implant and ridge-preservation procedures. A slim stainless-steel shaft carries a replaceable blade cartridge at the working end; gentle sweeping strokes against cortical bone produce uniform shavings that collect inside the instrument's chamber for easy retrieval and placement. The handle is 15.5 cm long overall, machined from stainless steel and supplied as a complete assembly with the replaceable blade. It is fully autoclavable and supplied non-sterile. Equate Instruments offers this scraper for surgeons who prefer harvesting intraoral autograft with a manual scraper rather than burs and irrigation, which can dilute the graft volume.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Bone Scraper
The Bone Scraper is a single-ended oral surgery instrument designed to harvest autogenous bone particles from intraoral donor sites during implant placement and graft preparation. The angled working head carries a shallow scoop with a sharp leading edge that glides along cortical bone to collect fine shavings ready for packing into an extraction socket, sinus lift or peri-implant defect. The lightweight stainless-steel body features a knurled hollow handle that keeps hand weight low during extended surgery and provides a secure, slip-resistant grip even when wet or gloved. Supplied non-sterile by Equate Instruments, the scraper is fully autoclavable and sized for comfortable intraoral access to the mandibular ramus, zygomatic buttress and other common donor sites.
View
Bone Scraper Straight 15.5 cm
The Straight Bone Scraper is a 15.5 cm oral surgery instrument used to harvest autogenous bone particles from flat intraoral donor sites during implant placement and graft preparation. The straight shaft and sharpened scoop blade deliver controlled linear strokes across the mandibular ramus, buttress or cortical shelf to collect fine shavings ready for graft packing. The instrument is machined from high-grade stainless steel by Equate Instruments with a lightweight ribbed hollow handle for a secure, non-slip grip during extended surgery. The blade can be exchanged with the matching replacement blade to refresh the cutting edge without replacing the full scraper. Supplied non-sterile and fully autoclavable for standard in-clinic processing.
View
Replacement Blade for Curved Bone Scraper
The Replacement Blade for the Curved Bone Scraper is a sharp stainless-steel insert engineered as a drop-in consumable for the matching curved bone-scraper handle. Its precision-ground cutting edge delivers a clean, atraumatic harvest of cortical bone shavings and restores the scraper's effectiveness once the original blade dulls from repeated use. Swapping the blade between patients maintains peak cutting efficiency without the cost of replacing the full instrument. The blade is machined from high-grade stainless steel by Equate Instruments, is fully autoclavable, and ships non-sterile for in-clinic sterilisation. Keep a small stock on the shelf so every implant, sinus-lift or graft procedure starts with a fresh, sharp edge.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Miller 8 Surgical Bone Curette - Titanium-Coated Hollow Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
View
