Fedi N.2 Periodontal Chisel 2.0mm - Solid Handle 6mm
The Fedi N.2 is a double-ended periodontal chisel designed for interdental osseous surgery where slightly wider bone removal is required. Its paired mirrored working blades terminate in a 2.0 mm cutting edge, sized to trim crestal bone and smooth osseous defects while preserving adjacent soft tissue. Fabricated from stainless steel with a 6 mm knurled solid handle, the chisel offers a balanced weight distribution for controlled back-and-forth push strokes. Supplied non-sterile and fully autoclavable, Equate Instruments presents this chisel as part of the Fedi graduated osseous surgery set for pouch or cassette sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Fedi N.1 Periodontal Chisel 1.8mm - Solid Handle 6mm
The Fedi N.1 is a double-ended periodontal chisel precision-engineered for interdental osseous surgery and fine crestal bone recontouring. Its paired mirrored working blades taper to a 1.8 mm cutting edge that reaches into narrow embrasures without traumatising adjacent soft tissue, letting the clinician address both mesial and distal surfaces with a single instrument. Crafted from high-grade stainless steel with a 6 mm knurled solid handle, the chisel is fully autoclavable and supplied non-sterile by Equate Instruments for in-clinic sterilisation in pouches or cassettes.
View
Zerfing Solid Handle 6mm
The Zerfing is a single-ended periodontal surgery instrument with a long tapered working shank that terminates in a fine pointed tip. It is used during periodontal and osseous procedures where a delicate probing or picking action is needed in narrow interdental or crestal areas. The instrument is crafted from stainless steel with a tapered knurled 6 mm solid handle that keeps weight low and feedback direct. Fully autoclavable and supplied non-sterile by Equate Instruments, it is compatible with standard pouch or cassette sterilisation workflows.
View
Enamel Chisel 3.0 mm, Solid Handle 6 mm
A double-ended 3.0 mm enamel chisel used to cleave unsupported enamel, refine cavosurface margins, and sharpen line angles during cavity preparation. The straight chisel blades at each end offer opposing angles for access to both anterior and posterior preparations without swapping instruments. Built by Equate Instruments as a one-piece stainless steel hand instrument, the chisel features a knurled 6 mm solid handle for a secure grip and balanced weight across the working ends. Fully autoclavable and supplied non-sterile for routine in-office steam sterilisation.
View
Enamel Chisel 3.0 mm, Solid Handle 6 mm
A double-ended 3.0 mm enamel chisel used to cleave unsupported enamel, refine cavosurface margins, and sharpen line angles during cavity preparation. The straight chisel blades at each end offer opposing angles for access to both anterior and posterior preparations without swapping instruments. Built by Equate Instruments as a one-piece stainless steel hand instrument, the chisel features a knurled 6 mm solid handle for a secure grip and balanced weight across the working ends. Fully autoclavable and supplied non-sterile for routine in-office steam sterilisation.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
