Fine Swedish Needle Holder TC
The Fine Swedish Needle Holder is a slim-shaft ratchet-locking needle driver engineered for fine and delicate suturing. The narrow tungsten-carbide (TC) inlaid jaws carry a fine cross-serrated pattern that grips small curved needles precisely, making the instrument well suited to microsurgical-style work in restricted oral and intraoral fields. The slim profile keeps the operator's line of sight clear at the needle tip, while the ratchet handle locks the jaws between passes. Gold-anodised finger rings mark the instrument as a TC-tipped needle holder. Fabricated from stainless steel with bonded TC inserts, fully autoclavable, and supplied non-sterile.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Adson Needle Holder Straight - 14 cm
The Adson Needle Holder Straight is a 14 cm suturing instrument with short, cross-hatched jaws that grip a curved needle securely without spinning. The jaw face carries a fine waffle pattern of cross-serrations, providing friction on surgical needles from 3-0 down to delicate micro-suture diameters, while the slim profile gives clear line-of-sight to the needle tip during intraoral suturing. Ratcheted ring handles let the operator set and hold a locked grip on the needle hands-free. Machined from corrosion-resistant stainless steel by Equate Instruments, this needle holder is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
View
Adson Needle Holder Straight - 18 cm
The Adson Needle Holder Straight is an 18 cm suturing instrument with short cross-hatched jaws that grip a curved needle firmly without spinning. The longer 18 cm body reaches posterior intraoral sites where a 14 cm needle holder cannot set a clean angle, while the slim profile preserves line-of-sight to the needle tip during suturing and knot tying. Ratcheted ring handles let the operator lock a chosen grip pressure on the needle hands-free. This Equate Instruments needle holder is machined from corrosion-resistant stainless steel, is fully autoclavable, and is supplied non-sterile for in-clinic steam sterilisation.
View
Adson Needle Holder Curved - 18 cm
The Adson Needle Holder Curved is an 18 cm suturing instrument with short, gently curved jaws carrying a fine cross-hatch pattern for a non-slip grip on surgical needles. The curve lets the operator approach posterior and palatal suture points at a more natural wrist angle than a straight holder, while the 18 cm body gives clean access to third-molar and retromolar sites. Ratcheted ring handles let the operator lock a chosen grip pressure on the needle hands-free during knot tying. This Equate Instruments needle holder is machined from corrosion-resistant stainless steel, is fully autoclavable, and is supplied non-sterile for in-clinic steam sterilisation.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Miller 8 Surgical Bone Curette - Titanium-Coated Hollow Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
View
