Mixing and Bone Collector Spatula - Anatomical Hollow Handle 10 mm
The Mixing and Bone Collector Spatula is a double-ended surgical instrument with one lance-shaped blade for mixing bone graft particles, biomaterials, and hydrating fluids in a dappen dish, and one flat paddle end for scraping and transferring collected bone from filters and trays into the graft site. The combined geometry removes the need to swap instruments during graft preparation. The 10 mm anatomical hollow handle is knurled for a secure wet grip under a lightweight balance. Machined from corrosion-resistant stainless steel, the spatula is fully autoclavable and supplied non-sterile by Equate Instruments for routine in-clinic reprocessing.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Stainless Steel Mixing Bowl with Cap
The Mixing Bowl with Cap is a small stainless-steel dish with a snap-fit lid used to hydrate particulate bone graft, mix blood or saline into biomaterials, and store the graft during a surgical workflow. The smooth polished interior prevents graft particles from sticking, and the firm press-on cap keeps the mixture clean when the surgeon steps away from the tray. The bowl's knurled side rings give the assistant a slip-free grip when the outer surface is wet, and the low profile fits easily onto a standard surgical cassette. Equate Instruments supplies the bowl non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Bone Graft Mixing Bowl
The Bone Graft Mixing Bowl is a small stainless-steel dappen-style bowl used to combine bone graft particulate with saline, blood, PRF, or carrier gel before placement. The deep recessed well keeps particles contained so the surgeon can wet and manipulate them without spillage, while the heavy flat base sits steadily on the surgical tray. The bowl is machined from a single piece of stainless steel with a polished interior that resists material adherence and makes cleaning straightforward. It is fully autoclavable and supplied non-sterile. Equate Instruments offers this mixing bowl as a staple accessory for implant and periodontal grafting trays alongside morselizers, bone carriers, and mixing spatulas.
View
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Hemingway Bone Curette 3.5 mm - Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
Miller 8 Surgical Bone Curette - Titanium-Coated Hollow Handle
Miller bone curettes are surgical hand instruments engineered for tooth-socket debridement, cyst enucleation, and alveolar curettage after extraction. The double-ended working tips feature slim spoon-shaped blades ground for controlled removal of granulation tissue and necrotic bone without over-instrumenting the socket walls, while the narrow shank geometry improves access to posterior sites where retromolar visibility is limited. Manufactured by Equate Instruments from surgical-grade stainless steel, this curette is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. It suits oral surgeons, periodontists, and general dentists performing routine extractions, apicectomies, and minor alveolar surgery.
View
Molt 9 Periosteal Elevator, 4mm/7mm Ends, Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
