Straight Bone Condenser 2.5-3.2 mm
This straight bone condenser is sized 2.5 mm at the apical tip tapering to 3.2 mm at the working face, a standard intermediate diameter in sequential implant site preparation. The working end carries laser-etched depth markings for implant-length gauging, and the stepped taper seats into the osteotomy prepared by the previous, smaller condenser. Made from hardened stainless steel by Equate Instruments with a knurled ergonomic handle, the condenser is designed for controlled percussive condensation under a surgical mallet. Fully autoclavable and reusable across cases.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Straight Bone Condenser 2.0-2.7 mm
This straight bone condenser is sized 2.0 mm at the apical tip tapering to 2.7 mm at the working face, a standard starting diameter for narrow-ridge implant site preparation. The working end carries laser-etched depth markings for intra-operative implant-length gauging, and the stepped taper lets the instrument seat precisely into a pre-drilled pilot osteotomy. Manufactured by Equate Instruments from hardened stainless steel with a knurled ergonomic handle, the condenser is designed for controlled percussive condensation under a surgical mallet. Fully autoclavable and reusable across cases.
View
Straight Bone Condenser 3.0-3.7 mm
This straight bone condenser is sized 3.0 mm at the apical tip tapering to 3.7 mm at the working face, a common diameter for standard-platform implant site preparation in the sequential osteotome workflow. The working end carries laser-etched depth markings for implant-length gauging, and the stepped taper seats into the osteotomy prepared by the previous, smaller condenser. Made from hardened stainless steel by Equate Instruments with a knurled ergonomic handle, the condenser is designed for controlled percussive condensation under a surgical mallet. Fully autoclavable and reusable across cases.
View
Straight Bone Condenser 3.5-4.2 mm
This straight bone condenser is sized 3.5 mm at the apical tip tapering to 4.2 mm at the working face, a wide-platform diameter used at the final step of sequential implant osteotomies and for larger implant platforms. The working end carries laser-etched depth markings for implant-length gauging, and the stepped taper seats into the osteotomy prepared by the previous, smaller condenser. Made from hardened stainless steel by Equate Instruments with a knurled ergonomic handle, the condenser is designed for controlled percussive condensation under a surgical mallet. Fully autoclavable and reusable across cases.
View
Straight Bone Condenser Osteotome - a4-b4.7 mm
The Straight Bone Condenser Osteotome in the a4-b4.7 mm size is an implant site-preparation instrument designed to condense and expand alveolar bone before fixture placement. Its straight shank carries laser-etched depth markings at 4, 6, 8, 10, 13, 15 and 18 mm so the surgeon can read working depth directly against the osteotomy without a separate probe. The apical tip is 4 mm and tapers to 4.7 mm toward the coronal end, producing a graduated socket that compresses trabecular bone rather than cutting it away. Machined from autoclavable stainless steel with a hollow knurled handle, this osteotome balances easily for controlled axial pressure during site refinement. A colour identification collar at the base speeds selection from a graduated Equate Instruments set. Supplied non-sterile for in-clinic steam sterilisation.
View
Straight Bone Condenser Osteotome - a4.5-b5.2 mm
The Straight Bone Condenser Osteotome in the a4.5-b5.2 mm size is an implant site-preparation instrument used to condense and expand alveolar bone before fixture placement. Its straight shank carries laser-etched depth markings at 4, 6, 8, 10, 13, 15 and 18 mm so the surgeon can read working depth directly against the osteotomy without a separate probe. The apical tip is 4.5 mm and tapers to 5.2 mm toward the coronal end, producing a graduated socket that compresses trabecular bone rather than cutting it away. Machined from autoclavable stainless steel with a hollow knurled handle, this osteotome balances easily for controlled axial pressure during osteotomy refinement. A polished identification collar at the base supports rapid selection from a graduated Equate Instruments set. Supplied non-sterile for in-clinic steam sterilisation.
View
Straight Bone Condenser Osteotome - a5-b5.7 mm
The Straight Bone Condenser Osteotome in the a5-b5.7 mm size is an implant site-preparation instrument used to condense and expand alveolar bone before fixture placement. Its straight shank carries laser-etched depth markings at 4, 6, 8, 10, 13, 15 and 18 mm so the surgeon can read working depth directly against the osteotomy. The apical tip is 5 mm and tapers to 5.7 mm toward the coronal end, producing a graduated socket that compresses trabecular bone rather than removing it. Machined from autoclavable stainless steel with a hollow knurled handle, the osteotome balances cleanly for controlled axial pressure during osteotomy refinement. A colour identification collar at the base speeds selection from a graduated Equate Instruments condenser set. Supplied non-sterile for in-clinic steam sterilisation.
View
Osteotome Straight-Concave Ø2.7 mm - 180 mm
The Osteotome Straight-Concave from Equate Instruments is a surgical bone osteotome built for controlled bone condensation during dental-implant site preparation. Its straight 180 mm shaft places the tip in-line with the handle for direct axial force transfer, while the concave working tip compacts peri-implant bone inward rather than cutting it, preserving vital cortical structure during osteotomy widening and sinus floor elevation. Graduated depth marks at 1.0, 1.2, 1.4, 1.6 and 1.8 cm give clear intra-operative reference. Machined from surgical-grade stainless steel with a lightweight fluted handle and a colour-coded diameter cap, it is fully autoclavable for routine steam sterilisation and supplied non-sterile. The calibrated diameter series lets surgeons progressively widen the osteotomy in controlled increments during atraumatic implant site preparation.
View
Osteotome Straight-Concave Ø3.2 mm - 180 mm
The Osteotome Straight-Concave from Equate Instruments is a surgical bone osteotome built for controlled bone condensation during dental-implant site preparation. Its straight 180 mm shaft places the tip in-line with the handle for direct axial force transfer, while the concave working tip compacts peri-implant bone inward rather than cutting it, preserving vital cortical structure during osteotomy widening and sinus floor elevation. Graduated depth marks at 1.0, 1.2, 1.4, 1.6 and 1.8 cm give clear intra-operative reference. Machined from surgical-grade stainless steel with a lightweight fluted handle and a colour-coded diameter cap, it is fully autoclavable for routine steam sterilisation and supplied non-sterile. The calibrated diameter series lets surgeons progressively widen the osteotomy in controlled increments during atraumatic implant site preparation.
View
Osteotome Straight-Concave Ø4.1 mm - 180 mm
The Osteotome Straight-Concave from Equate Instruments is a surgical bone osteotome built for controlled bone condensation during dental-implant site preparation. Its straight 180 mm shaft places the tip in-line with the handle for direct axial force transfer, while the concave working tip compacts peri-implant bone inward rather than cutting it, preserving vital cortical structure during osteotomy widening and sinus floor elevation. Graduated depth marks at 1.0, 1.2, 1.4, 1.6 and 1.8 cm give clear intra-operative reference. Machined from surgical-grade stainless steel with a lightweight fluted handle and a colour-coded diameter cap, it is fully autoclavable for routine steam sterilisation and supplied non-sterile. The calibrated diameter series lets surgeons progressively widen the osteotomy in controlled increments during atraumatic implant site preparation.
View
Straight Bone Condenser Osteotome - 4.5 mm
The Straight Bone Condenser Osteotome in the 4.5 mm size is a single-ended implant-preparation instrument designed to condense and shape alveolar bone before fixture placement. Its straight shank carries laser-etched depth markings so the surgeon can read working depth directly off the instrument during osteotomy refinement. The concave 4.5 mm working tip compresses trabecular bone rather than removing it, helping preserve bone volume and primary implant stability. Machined from autoclavable stainless steel with a hollow knurled handle, the osteotome balances cleanly for controlled axial pressure during bone condensation and indirect sinus lifting. A colour identification collar at the base speeds selection from a graduated Equate Instruments set. Supplied non-sterile for in-clinic steam sterilisation.
View
Osteotome Straight-Concave Ø4.9 mm - 180 mm
The Osteotome Straight-Concave from Equate Instruments is a surgical bone osteotome built for controlled bone condensation during dental-implant site preparation. Its straight 180 mm shaft places the tip in-line with the handle for direct axial force transfer, while the concave working tip compacts peri-implant bone inward rather than cutting it, preserving vital cortical structure during osteotomy widening and sinus floor elevation. Graduated depth marks at 1.0, 1.2, 1.4, 1.6 and 1.8 cm give clear intra-operative reference. Machined from surgical-grade stainless steel with a lightweight fluted handle and a colour-coded diameter cap, it is fully autoclavable for routine steam sterilisation and supplied non-sterile. The calibrated diameter series lets surgeons progressively widen the osteotomy in controlled increments during atraumatic implant site preparation.
View
Osteotome Straight-Concave Ø2.0 mm - 180 mm
The Osteotome Straight-Concave from Equate Instruments is a surgical bone osteotome built for controlled bone condensation during dental-implant site preparation. Its straight 180 mm shaft places the tip in-line with the handle for direct axial force transfer, while the concave working tip compacts peri-implant bone inward rather than cutting it, preserving vital cortical structure during osteotomy widening and sinus floor elevation. Graduated depth marks at 1.0, 1.2, 1.4, 1.6 and 1.8 cm give clear intra-operative reference. Machined from surgical-grade stainless steel with a lightweight fluted handle and a colour-coded diameter cap, it is fully autoclavable for routine steam sterilisation and supplied non-sterile. The calibrated diameter series lets surgeons progressively widen the osteotomy in controlled increments during atraumatic implant site preparation.
View
