Adams Pliers with TC Inserts - 1.0 mm (.040 in) Wire
The Adams Plier with tungsten carbide (TC) inserts bends stainless orthodontic wire up to 1.0 mm (.040 in) into Adams cribs, clasps, and retentive loops for removable appliances. The square-nosed mating jaws form sharp right-angle bends, while the TC inserts bite positively onto the wire and extend plier lifespan under heavy wire work. Equate Instruments builds this plier from hardened stainless steel with polished plain round handles for firm finger control. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Adams Plier - Max 0.7 mm, 13 cm
The Adams Plier is the reference instrument for fabricating Adams clasps on removable orthodontic appliances and retainers. Its square, sharply tapered beaks grip round wire up to 0.7 mm (.028 in) at precise points, enabling the crisp 90-degree arrowhead bends that give the clasp its retentive grip on molar undercuts. The pointed tip profile also helps engage existing clasps for minor chairside adjustments. Made from stainless steel with a slim teardrop handle, the plier maintains tight beak alignment through repeated use and sterilisation. It is supplied non-sterile so the clinic can process it through its standard autoclave workflow before placement in the orthodontic plier set.
View
Adams Pliers No. 64
Adams Pliers No. 64 are a classic orthodontic wire-bending pliers designed for forming sharp, precise right-angle bends in stainless-steel wire used in Adams clasps, labial bows, and other active and retentive components on removable appliances. The short, stout beaks have a flat square-profile working face that grips the wire without rounding the apex of the bend, so clasp arrow-heads stay sharp and well defined. The pliers feature a rigid box-joint pivot for minimal lateral play and handle offset for comfortable one-handed control at the chair or bench. Hardened stainless-steel beaks cut wire up to .036" (0.92 mm). Equate Instruments supplies the No. 64 non-sterile, ultrasonically cleaned, and individually packed for in-clinic sterilisation.
View
Adams Pliers No. 65
Adams Pliers No. 65 are a classic orthodontic wire-bending pliers designed for forming sharp, precise right-angle bends in stainless-steel wire used in Adams clasps, labial bows, and other active and retentive components on removable appliances. The slim pointed beaks give tight access around existing clasp geometry and bring the bend apex closer to the grip, making adjustment bends easier on complex appliances. The pliers feature a rigid box-joint pivot for minimal lateral play and handle offset for comfortable one-handed control at the chair or bench. Hardened stainless-steel beaks cut wire up to .036" (0.92 mm). Equate Instruments supplies the No. 65 non-sterile, ultrasonically cleaned, and individually packed for in-clinic sterilisation.
View
How Utility Plier 3.2mm Max 0.028 Inch Wire
The How Utility Plier is a general-purpose orthodontic instrument for grasping, contouring and bending arch wires, as well as seating molar bands and loosely crimping crowns. Tapered parallel tips give the clinician fine control over wire positioning, and the plier will hold round or rectangular archwires up to 0.028 inch (0.71 mm) in diameter. Forged from stainless steel with a simple spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for in-clinic sterilisation between patients.
View
Three-Prong Wire Bending Pliers
Three-Prong Wire Bending Pliers are a general-purpose orthodontic tool for bending round wires, adjusting clasps on removable appliances, and forming stops and U-bends. The working head carries two prongs on one jaw and a single prong on the opposing jaw that nests between them, so the wire is gripped on three sides and can be bent precisely without twisting out of the plane of the plier. Equate Instruments forges the body in stainless steel with tapered arms and a smooth box-joint pivot. The tool is corrosion resistant, fully autoclavable, and supplied non-sterile for standard in-clinic sterilisation. Equally suitable for chairside adjustments and bench work in the orthodontic laboratory.
View
Universal Orthodontic Plier with Tungsten Carbide Tips
The Universal Orthodontic Plier from Equate Instruments is a multipurpose wire-working instrument fitted with tungsten-carbide (TC) tips for holding, bending, and contouring orthodontic archwires. The flat opposing beaks grip round and rectangular wires securely, allowing the operator to form utility arches, place bayonet bends, and adjust intraoral wires with a single plier. A hardened stainless-steel body carries the TC insert at the working end to resist wear from repeated wire contact. Gold-tone grip tips on the handles identify TC instruments on the rack at a glance. The plier is autoclavable and supplied non-sterile for standard in-clinic processing.
View
Weingart Orthodontic Pliers TC (0.71mm / .028 in Wire)
The Weingart Orthodontic Pliers from Equate Instruments are the classic serrated-tip plier used to place, remove, and manipulate archwires in fixed orthodontic treatment. Long narrow beaks with cross-serrations grip round and rectangular wires up to 0.71 mm (.028 in) without slipping, allowing precise intraoral placement into bracket slots and distal tube receptacles. The beaks are fitted with tungsten-carbide (TC) inserts for hard-wearing grip that lasts through many more cycles than plain stainless steel. Leaf-spring handles in hardened stainless steel open the plier automatically between uses. The instrument is autoclavable and supplied non-sterile for in-clinic processing.
View
Long Weingart Pliers - Max 0.71mm (.028") Wire
Long Weingart pliers are a chairside orthodontic workhorse for placing and removing archwires through brackets and bands. The elongated beaks reach the posterior buccal segments without levering the plier body against the cheek, and the serrated tungsten-carbide tips hold rectangular and round wires up to 0.71 mm (.028 inch) without slipping during seating and cinch-back. Angled working tips provide a clear sight line into the bracket slot so wire engagement is visual as well as tactile. The stainless-steel body carries a dark surface finish that cuts glare under operatory lights, and the polished spring handles return smoothly between grips. This Equate Instruments plier is fully autoclavable and supplied non-sterile for standard cassette processing.
View
Long Weingart Pliers - Max 0.71mm (.028") Wire
Long Weingart pliers are a chairside orthodontic workhorse for placing and removing archwires through brackets and bands. The elongated beaks reach the posterior buccal segments without levering the plier body against the cheek, and the serrated tungsten-carbide tips hold rectangular and round wires up to 0.71 mm (.028 inch) without slipping during seating and cinch-back. Angled working tips provide a clear sight line into the bracket slot so wire engagement is visual as well as tactile. The stainless-steel body carries a dark surface finish that cuts glare under operatory lights, and the polished spring handles return smoothly between grips. This Equate Instruments plier is fully autoclavable and supplied non-sterile for standard cassette processing.
View
Long Weingart Pliers - Tungsten Carbide
The Long Weingart Pliers are an orthodontic utility plier with elongated angled beaks designed to grip, guide and seat archwires through bracket slots from either side of the arch. The narrow serrated tungsten-carbide insert tips hold round and rectangular archwires up to 0.71 mm (0.028 inch) without slipping, while the extended jaw reach improves access to the distal molar tubes. Long curved stainless-steel handles taper outward for a comfortable two-finger grip and close the jaws with minimal pinch force. The plier is autoclavable and supplied non-sterile. From Equate Instruments, it is a reliable chairside tool for archwire placement, removal and adjustment across fixed appliance treatment.
View
Slim Weingart Pliers
The Slim Weingart Pliers are a narrow-profile orthodontic utility plier designed for archwire placement and removal in tight interbracket spaces. The slim, angled beaks taper to a fine serrated tip that grips round and rectangular archwires up to 0.50 mm (0.020 inch), giving the clinician more visibility at the bracket face than a standard Weingart. Long curved stainless-steel handles taper outward for a relaxed two-finger grip and close the slim jaws with minimal force. The plier is autoclavable and supplied non-sterile. From Equate Instruments, it suits clinicians working with light initial archwires and crowded arches where a slim beak profile matters.
View
Weingart Pliers
The Weingart Pliers are a classic orthodontic utility plier with angled beaks designed to grip, guide and seat archwires through bracket slots. The serrated gripping tips hold round and rectangular archwires up to 0.71 mm (0.028 inch) without slipping, and the angled jaw approach keeps the archwire's curve intact during placement and removal. Long curved stainless-steel handles taper outward for a comfortable two-finger grip and close the jaws with low pinch force. The plier is autoclavable and supplied non-sterile. From Equate Instruments, this is a daily-driver for orthodontic adjustments, archwire changes and finishing across fixed appliance treatment.
View
