Sterilization & Organization
Cassettes, trays, instrument boxes, containers, bowls, and racks for instrument management and sterilization workflows.
102 instruments available
Showing 1–24 of 102 instruments
Sterilization Cassette for 5 Instruments - 182 x 72 x 34 mm
This 5-instrument sterilization cassette is a stainless-steel organiser sized 182 x 72 x 34 mm for cleaning, sterilising, and storing small dental hand instruments in a single tray. Laser-cut perforations on the lid and base allow cleaning solutions and steam to reach every surface during ultrasonic cleaning and autoclave cycles, while the silicone rails cradle five instruments in fixed slots to prevent tip-to-tip contact between adjacent handles. The clam-shell design latches closed for safe transport between ultrasonic bath, washer-disinfector, and autoclave. Fully autoclavable and corrosion-resistant, the cassette is supplied by Equate Instruments as a reusable workflow unit for the sterilisation room.
Medium Sterilization Cassette with Removable Top - 10 Instruments, 192 x 144 x 34 mm
This medium sterilization cassette is a stainless-steel organiser sized 192 x 144 x 34 mm with a removable top, holding up to ten dental hand instruments in fixed silicone-lined slots. Laser-cut perforations on the lid and base let detergent and steam reach every surface during ultrasonic cleaning and autoclave cycles, while the silicone rails keep each instrument separated to protect delicate working ends from tip-to-tip contact. The detachable lid makes instrument loading, inspection, and restocking fast between patients. Fully autoclavable and corrosion-resistant, the cassette is supplied by Equate Instruments as a reusable workflow unit for busy sterilisation rooms.
Sterilization Cassette for 20 Instruments - 288 x 182 x 34 mm
This 20-instrument sterilization cassette is a large stainless-steel organiser sized 288 x 182 x 34 mm for cleaning, sterilising, and storing full procedure sets in a single tray. Laser-cut perforations on the lid and base let detergent and steam reach every surface during ultrasonic cleaning and autoclave cycles, while the silicone rails cradle twenty instruments in fixed slots to prevent tip-to-tip damage during transport. The clam-shell design latches closed for safe handling between ultrasonic bath, washer-disinfector, and autoclave. Fully autoclavable and corrosion-resistant, the cassette is supplied by Equate Instruments as a reusable workflow unit for sterilisation rooms handling restorative, surgical, or perio kits.
Sterilization Cassette for 5 Instruments
The Sterilization Cassette is a stainless steel enclosure designed to organise, protect, and steam-sterilise a set of dental hand instruments as a single unit. Perforations across the lid and base let steam and cleaning solutions flow freely through the instruments, and the hinged lid latches closed to hold the contents in place between the operatory and the autoclave. Blue silicone combs inside the tray hold each instrument on its own spine so working ends never contact the cassette wall or each other, preserving edges on scalers, curettes, and elevators. This configuration accommodates five instruments, making it a natural fit for simple procedure setups such as examination or prophy trays. Equate Instruments supplies the cassette in autoclavable stainless steel for routine steam sterilisation cycles.
Sterilization Cassette for 7 Instruments
This 7-instrument sterilization cassette is a stainless-steel organiser for cleaning, sterilising, and storing mid-size dental hand instrument sets. Laser-cut perforations across the lid and base let detergent and steam reach every surface during ultrasonic cleaning and autoclave cycles, while the silicone rails cradle seven instruments in fixed slots to prevent tip-to-tip contact between adjacent handles. The clam-shell design latches closed for safe transport between ultrasonic bath, washer-disinfector, and autoclave. Fully autoclavable and corrosion-resistant, the cassette is supplied by Equate Instruments as a reusable workflow unit for mid-size restorative, exam, or perio kits.
Sterilization Cassette for 10 Instruments
This 10-instrument sterilization cassette is a stainless-steel organiser for cleaning, sterilising, and storing standard dental procedure sets. Laser-cut perforations across the lid and base let detergent and steam reach every surface during ultrasonic cleaning and autoclave cycles, while dual silicone rails cradle ten instruments in fixed slots to prevent tip-to-tip contact between adjacent handles. The clam-shell design latches closed for safe transport between ultrasonic bath, washer-disinfector, and autoclave. Fully autoclavable and corrosion-resistant, the cassette is supplied by Equate Instruments as a reusable workflow unit for restorative, perio, and minor surgery kits.
Sterilization Cassette for 20 Instruments
The Sterilization Cassette is a stainless steel enclosure designed to organise, protect, and steam-sterilise a set of dental hand instruments as a single unit. Perforations across the lid and base let steam and cleaning solutions flow freely through the instruments, and the hinged lid latches closed to hold the contents in place between the operatory and the autoclave. Blue silicone combs inside the tray hold each instrument on its own spine so working ends never contact the cassette wall or each other, preserving edges on scalers, curettes, and elevators. This configuration accommodates twenty instruments, suiting full procedure setups such as periodontal scaling, surgical extraction, or restorative trays. Equate Instruments supplies the cassette in autoclavable stainless steel for routine steam sterilisation cycles.
Multi-Instrument Sterilization Tray with Clips - Small
The Small Multi-Instrument Sterilization Tray is a stainless-steel procedure tray designed to hold mixed dental instruments in one pass through the ultrasonic bath, washer-disinfector, and autoclave. The base and lid are laser-perforated for thorough steam access, and dual blue silicone rails hold scalers, curettes, explorers, and smaller hand instruments in ordered rows while built-in stainless clips on the lid secure longer items such as scissors, needle holders, and forceps. The hinged clam-shell design latches closed for safe transport between stations. Fully autoclavable and corrosion-resistant, the tray is supplied by Equate Instruments as a reusable workflow unit for mixed surgical and restorative kits.
Multi-Instrument Sterilization Tray with Clips - Large
The Large Multi-Instrument Sterilization Tray is a perforated stainless-steel procedure tray designed to hold full surgical and restorative kits through ultrasonic cleaning, washer-disinfection, and autoclave in one pass. Wide laser-cut perforations on the base and lid allow steam and detergent to reach every surface, while silicone rails hold scalers, curettes, and explorers in ordered rows and built-in stainless clips on the lid secure longer instruments such as scissors, forceps, and needle holders. The hinged clam-shell frame latches closed for safe transport between stages. Fully autoclavable and corrosion-resistant, the tray is supplied by Equate Instruments as a reusable workflow unit for busy surgery and implant kits.
Autoclavable Plastic Tray for Luxating Elevators
The Plastic Tray for Luxating Elevators is an autoclavable procedure tray shaped to hold plastic-handled luxating elevators in a defined layout during cleaning, sterilisation, and chairside presentation. The open-frame design holds each elevator by the handle so the working blade sits free in the air, letting steam and detergent reach every surface during ultrasonic cleaning and autoclave cycles. Available in black and grey, the tray is manufactured from a heat-stable autoclavable polymer and pairs with the full luxator kit for one-step sterilisation. Equate Instruments supplies the tray non-sterile for first-use sterilisation in the clinic's standard workflow.
Kidney Tray 20 cm
The 20 cm stainless-steel kidney tray is an essential chairside and surgery accessory for holding small instruments, gauze, extracted teeth and waste at the point of care. The concave kidney profile conforms to the patient's jawline or the assistant's forearm, directing fluid and debris into the deep reservoir without spilling over the sides. Formed from polished stainless steel by Equate Instruments, this tray is fully autoclavable and supplied non-sterile so it can be processed in the clinic's preferred workflow. The smooth rolled rim resists bending during repeated use and wipe-down disinfection.
Instrument Tray with Lid 23 x 15 x 5 cm
The 23 x 15 x 5 cm stainless-steel instrument tray with loose-fit lid is a dependable workhorse for holding and covering clean or contaminated dental instruments between procedures. The deep rectangular basin accommodates forceps, scalers, elevators and full procedure set-ups, while the knob-handled lid keeps the contents shielded from splatter and airflow. Fabricated from polished stainless steel by Equate Instruments, this tray is fully autoclavable and tolerates routine chemical disinfection. The smooth interior wipes clean, and the lid doubles as a working surface when needed.
Perforated Sterilisation Tray
This perforated sterilisation tray is engineered to process mixed instrument loads - scalers, forceps, elevators, needle holders - in a single run. The uniformly perforated base and lid let steam, ultrasonic solutions and dry-heat airflow circulate around each instrument, supporting complete decontamination and drying without pooling. Integrated instrument clips hold scissors, needle holders and hinged instruments open during sterilisation so the joints are reached. Built by Equate Instruments from stainless steel, the tray is autoclavable, corrosion-resistant and compatible with ultrasonic baths and chemical disinfectants.
Perforated Base Sterilisation Tray
This perforated base sterilisation tray pairs a perforated stainless-steel basin with a solid hinged lid, giving full airflow access to the instruments while keeping the tray stackable in crowded autoclave chambers. The integrated instrument bars hold scalers, scissors, needle holders and elevators securely in place during decontamination and transport. Made from stainless steel by Equate Instruments, the tray is autoclave- and dry-heat-safe, ultrasonic-compatible and tolerates standard chemical disinfectants. The hinged lid flips back flat for instant chairside access.
Solid Base Sterilisation Tray
The solid-base sterilisation tray is a stainless-steel cassette built for dry heat cycles and chemical-disinfection workflows where a perforated base would leak solution or lose fine components. The hinged solid lid keeps debris out and the integrated instrument bars hold scalers, forceps and needle holders in place during reprocessing and transport. Constructed by Equate Instruments from stainless steel, this tray is corrosion-resistant, autoclavable and tolerates standard chemical disinfectants. The smooth interior wipes clean between uses.
Instrument Tray 27.5 x 17.3 x 3.8 cm
The 27.5 x 17.3 x 3.8 cm instrument tray is a polished stainless-steel procedure tray sized for full operative and hygiene set-ups. The open rectangular basin accepts forceps, scalers, elevators, mirrors and cassettes without crowding, and the shallow 3.8 cm depth keeps instruments visible at chairside. Pressed from a single sheet of stainless steel by Equate Instruments, the tray is corrosion-resistant, fully autoclavable and tolerates chemical disinfection. The smooth rolled rim reinforces the edge and wipes clean between uses.
Instrument Tray with Lid
This covered instrument tray pairs a shallow stainless-steel basin with a loose-fit lid for holding clean or set-up instruments through procedures and short-term storage. The central lift handle on the lid gives single-handed access, and the basin houses forceps, scalers, scissors and needle holders with room for cassettes. Made from polished stainless steel by Equate Instruments, both the basin and lid are fully autoclavable and compatible with chemical disinfection. The smooth interior resists staining and wipes clean between patients.
Shallow Mayo Tray 28 x 17.5 x 3.9 cm
The 28 x 17.5 x 3.9 cm shallow Mayo tray is a polished stainless-steel procedure tray used on Mayo stands and chairside surfaces for laying out operative, hygiene and surgical set-ups. The low-profile basin keeps instruments fully visible and quickly reachable during procedures, and the generous footprint accepts cassettes and full hand-instrument kits side by side. Fabricated by Equate Instruments from corrosion-resistant stainless steel, the tray is autoclavable and tolerates chemical disinfection. The smooth rolled rim reinforces the edge for rigidity and easy handling.
Instrument Tray 20 x 10 x 2 cm
This compact 20 x 10 x 2 cm instrument tray is designed for small dental set-ups - single-procedure kits, endodontic files, hand instruments and restorative ends. The ribbed bottom raises instruments above any condensate, keeping handles out of standing liquid and making it easier to pick up the next tool. Made from polished stainless steel by Equate Instruments, the tray is corrosion-resistant, fully autoclavable and compatible with chemical disinfection. The rolled rim adds rigidity to the thin-walled body.
Catheter Tray
The catheter tray is a compact, wedge-profile stainless-steel holder used where space is limited and a discreet chairside tray is needed. The narrow base stacks neatly on bracket tables and mobile carts, and the raised rim contains catheter tips, suction tubing, cartridges and small instruments during a procedure. Polished stainless steel makes the tray from Equate Instruments autoclavable and easy to wipe clean. Supplied non-sterile for in-clinic processing in pouches or cassettes.
Perforated Instrument Tray
The perforated instrument tray is an open-top stainless-steel tray with uniformly spaced perforations across the base and walls, allowing steam, ultrasonic solution and dry-heat airflow to circulate around every instrument. Compact end handles keep fingers clear of the chamber walls during loading and unloading. Constructed from stainless steel by Equate Instruments, the tray is corrosion-resistant and compatible with steam autoclave, dry heat, ultrasonic and chemical-disinfection workflows. Supplied non-sterile for in-clinic processing.
Stainless Steel Lotion Bowl, 65 mL
The Stainless Steel Lotion Bowl is a compact chairside container used for dispensing irrigants, disinfectants, cotton rolls, and small dental consumables during clinical procedures. With an approximate 65 mL capacity and a smooth polished interior, the bowl pours cleanly, rinses quickly, and stacks efficiently on procedure trays. Manufactured from surgical stainless steel with rolled rims for chip resistance and safe handling, the bowl is fully autoclavable and suitable for repeated daily use. Supplied non-sterile by Equate Instruments for in-clinic sterilisation in pouches or trays.
Bowl Ø 6.5 cm (130 ml)
This stainless-steel dental bowl is a general-purpose chairside container for mixing rinse solutions, holding gauze and cotton pellets, decanting sterile saline, or corralling small items during restorative, surgical, and hygiene procedures. The flanged rim keeps the bowl stable on the bracket table and supports drip-free pouring. Machined from a single piece of stainless steel and polished to a mirror finish, the bowl resists corrosion through repeated thermal-disinfector and autoclave cycles. Equate Instruments supplies it non-sterile so the practice can process it to its own standard and stage it alongside other cassette-tray components.
Bowl Ø 7 cm (190 ml)
This stainless-steel dental bowl is a general-purpose chairside container for mixing rinse solutions, holding gauze and cotton pellets, decanting sterile saline, or corralling small items during restorative, surgical, and hygiene procedures. The flanged rim keeps the bowl stable on the bracket table and supports drip-free pouring. Machined from a single piece of stainless steel and polished to a mirror finish, the bowl resists corrosion through repeated thermal-disinfector and autoclave cycles. Equate Instruments supplies it non-sterile so the practice can process it to its own standard and stage it alongside other cassette-tray components.
