Endodontic
Explorers, spreaders, pluggers, files, and organizers for root canal access, cleaning, shaping, and obturation.
54 instruments available
Showing 1–24 of 54 instruments
Endodontic Explorer No.8
The Endodontic Explorer No.8 is a single-ended diagnostic instrument used to locate canal orifices, explore furcations and evaluate calculus, caries and restorative margins on tooth surfaces. Its fine angled working tip transmits clear tactile feedback, letting the operator catch small irregularities in the pulp chamber floor or along the cement-enamel junction with minimal pressure on the tooth. The working end is titanium-coated for corrosion resistance and a reduced thermal feel, and sits on a slim 9.5 mm hollow handle engineered for low mass and a stable fingertip grip. Fully autoclavable, supplied non-sterile by Equate Instruments for in-clinic steam sterilisation.
Endodontic Explorer No.9
The Endodontic Explorer No.9 is a single-ended diagnostic instrument engineered to open and locate small canal orifices during endodontic access, and to detect caries, calculus and restorative defects on tooth surfaces. Its slender angled working tip transmits clear tactile feedback, letting the operator trace the pulp chamber floor and map canal entries with minimal pressure on the tooth. The working end is titanium-coated for corrosion resistance and a reduced thermal feel, and sits on a slim 9.5 mm hollow handle engineered for low mass and a stable fingertip grip. Fully autoclavable, supplied non-sterile by Equate Instruments for in-clinic steam sterilisation in pouches or cassettes.
Bone File Fig.2 Rasp Hollow Handle 10mm
The Bone File with Rasp Hollow Handle is a double-ended surgical file used during oral and periodontal surgery to smooth sharp bone edges, refine osseous margins around extraction sockets, and finish the alveolar ridge before flap closure. Each tip carries a raised rasp of precision-cut teeth that abrades bone with a directional stroke, while the opposing end offers a complementary cut pattern for detailed work in tight anatomy. The lightweight hollow stainless-steel handle is knurled for a secure grip during tactile, low-force filing, reducing operator fatigue during extended procedures. Forged stainless steel resists corrosion and tolerates repeated steam sterilisation. Supplied non-sterile, this Equate Instruments bone file is specified for reusable surgical workflows in cassettes or pouches.
Root Canal Stopper 0.5 mm - C8 Hollow Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C8 lightweight hollow knurled stainless-steel handle that reduces hand fatigue during extended endodontic sessions, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
Root Canal Stopper 0.6mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
Root Canal Stopper 0.7mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
Root Canal Stopper 0.9mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
Root Canal Stopper 1.2mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
Root Canal Stopper 0.5 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
Root Canal Stopper 0.6 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
Root Canal Stopper 0.7 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
Root Canal Stopper 0.9 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
Root Canal Stopper 1.2 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
Endodontic Hand Spreader 1S - C6 Handle
The Endodontic Hand Spreader 1S is the finest size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The slender, tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in narrow or curved canals, giving the operator a clear tactile feel of canal anatomy. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and larger spreader sizes.
Endodontic Hand Spreader 2S - C6 Handle
The Endodontic Hand Spreader 2S is a fine size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in narrow to moderately shaped canals, giving the operator a clear tactile feel of canal anatomy. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and neighbouring spreader sizes.
Endodontic Hand Spreader 3S - C6 Handle
The Endodontic Hand Spreader 3S is a mid-fine size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in a wide range of canal anatomies, giving the operator clear tactile feedback while packing. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and neighbouring spreader sizes.
Endodontic Hand Spreader 4S - C6 Handle
The Endodontic Hand Spreader 4S is a medium size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in moderate canal anatomies, giving the operator clear tactile feedback while packing. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and neighbouring spreader sizes.
Endodontic Hand Spreader 5S - C6 Handle
The Endodontic Hand Spreader 5S is a medium-to-larger size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in wider canals, giving the operator clear tactile feedback while packing in the middle and coronal thirds. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and neighbouring spreader sizes.
Endodontic Hand Spreader 6S - C6 Handle
The Endodontic Hand Spreader 6S is a larger size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in wide canals, giving the operator clear tactile feedback while packing the middle and coronal thirds. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and neighbouring spreader sizes.
Endodontic Hand Spreader 7S - C6 Handle
The Endodontic Hand Spreader 7S is the largest size in a graduated 1S-7S obturation series and is used for lateral condensation of gutta-percha in root canals. The tapered working end is ground to compact master cones against the canal wall and create space for accessory cones in the widest canals, giving the operator clear tactile feedback while packing the coronal third. It is built on a solid C6 stainless-steel handle with a knurled mid-section for controlled finger pressure during apical packing. Fully autoclavable and corrosion-resistant, the spreader is supplied non-sterile by Equate Instruments and integrates directly into hand-obturation kits alongside matching pluggers and smaller spreader sizes.
Gutta-Percha Remover - Up/Down Hook 0.4 mm
The Gutta-Percha Remover with an up/down oriented hook at 0.4 mm is a manual hand instrument for disengaging and lifting gutta-percha points during endodontic retreatment and post-space preparation. The fine hook is sized to catch the obturation material in the canal without engaging the dentine wall, giving the operator controlled tactile feedback during removal. Supplied non-sterile on a stainless-steel frame, the remover is fully autoclavable for standard in-clinic sterilisation. Equate Instruments supplies the up/down variant alongside a matching left/right hook for completing a retreatment kit.
Gutta-Percha Remover - Left/Right Hook 0.4 mm
The Gutta-Percha Remover Left/Right Hook at 0.4 mm is a double-ended manual instrument for disengaging and lifting gutta-percha points during endodontic retreatment and post-space preparation. One end carries a hook angled to the left and the other a mirror-image hook angled to the right, giving the operator matched working ends for both mesial and distal approaches without rotating the handle in the hand. Built on a knurled stainless-steel handle with a balanced central grip, the instrument is fully autoclavable and supplied non-sterile by Equate Instruments. It complements the up/down hook variant in a complete retreatment kit.
Endodontic File Holder Forceps
The Endodontic File Holder Forceps is a long spring-handled instrument designed to grip and manipulate endodontic files during pre-curving, re-curving, and shaping procedures outside the mouth. The fine opposing jaws hold a file securely without marring its flutes so the clinician can introduce or refine a curve before placing the file in the canal. The thin stainless-steel shafts keep the line of sight open on the instrument stand while the ratchet-free spring handle gives the operator immediate open-close feedback for rapid file exchanges. Manufactured by Equate Instruments from autoclavable stainless steel, the forceps are fully reusable and compatible with standard washer-disinfector and steam-sterilisation cycles. Supplied non-sterile for in-clinic processing.
Steiglitz Endo File Forceps - 90 Degree Angle
The Steiglitz Endo File Forceps are a precision retrieval instrument for fractured root-canal files and silver points lodged in the pulp chamber or coronal canal. Angulated working tips and fine tapered jaws close over sub-millimetre fragments with operator-modulated pressure, giving clinicians confident line-of-sight control during endodontic retreatment. The forceps use a tweezer-style tension spring without a ratchet mechanism, delivering responsive open-close action across extended cases. Contrasting golden handle arms aid visual identification on the instrument tray and provide a balanced two-finger grip. Equate Instruments supplies the forceps non-sterile; they are stainless steel throughout and fully autoclavable for long-term reuse in endodontic practice.
