Mathieu Needle Holder - 14 cm, Tungsten Carbide, Gold Loops
The Mathieu Needle Holder is a spring-action suturing instrument used to guide and grasp surgical needles during oral and periodontal procedures. Its cross-hatched insert jaws are sized for needles held between 2-0 and 4-0 sutures, and the central ratchet lock holds the needle under consistent pressure while the operator advances the stitch. A gentle squeeze disengages the ratchet for rapid needle repositioning without releasing the needle. The slender spring handle with gold-toned finger loops delivers precise single-handed control, making the instrument well suited to restricted intraoral fields. The stainless steel body and tungsten carbide jaw inserts are fully autoclavable for routine steam sterilisation. Supplied non-sterile for clinic-based processing.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Mathieu-Olsen Needle Holder with Scissor - 17 cm
The Mathieu-Olsen Needle Holder combines the quick spring-handle action of a classic Mathieu with the integrated scissor feature of an Olsen-Hegar, so the surgeon can grip, release, and cut suture material without switching instruments. The 17 cm shaft provides comfortable reach to the posterior arch during oral-surgical and implantology suturing. The short working jaws carry cross-serrations for a secure grip on curved surgical needles, and the ratchet mechanism locks in several positions so the needle can be held at whatever angle best suits the tissue. An integrated small scissor blade close to the hinge lets the operator trim suture tails in a single continuous motion. Manufactured by Equate Instruments from surgical stainless steel with tungsten carbide inserts, the needle holder is fully autoclavable and supplied non-sterile.
View
Mathieu Needle Holder - Straight 14 cm with TC Tips
The Mathieu Needle Holder is a 14 cm spring-handled suturing instrument used to grip and guide curved surgical needles during oral-surgical and periodontal procedures. Cross-serrated working jaws fitted with tungsten-carbide inserts grip the needle without rotation, while the multi-position ratchet at the base of the handle lets the operator set and release grip pressure with a single squeeze. The compact 14 cm length suits anterior and premolar sites in both arches and gives the surgeon fine directional control. The characteristic gold-anodised finger ring identifies the tungsten-carbide jaw upgrade so assistants can select the right needle holder at a glance. Manufactured by Equate Instruments from autoclavable surgical stainless steel, the instrument is reusable and supplied non-sterile for in-clinic steam sterilisation.
View
Mathieu Needle Holder - Curved, Stainless Steel
This Mathieu needle holder is a spring-action surgical instrument for guiding and grasping curved suture needles during intra-oral soft-tissue closure. The serrated stainless jaws grip the needle firmly, and the integrated multi-position ratchet lock sets tension on the needle and releases with a smooth single-handed squeeze so the surgeon can regrip without losing position. The one-piece stainless-steel frame is tapered for intra-oral access and has a serrated handle spine that gives a confident fingertip grip even when fingers are wet. The complete instrument withstands routine steam sterilisation and reprocesses alongside the rest of the surgical tray.
View
Mathieu Needle Holder - Straight 17 cm with TC Tips
The Mathieu Needle Holder in the 17 cm length is a spring-handled suturing instrument used to grip and guide curved surgical needles in the posterior maxilla and mandible during oral-surgical and periodontal procedures. The longer shaft extends reach into distal molar sites while the cross-serrated tungsten-carbide jaws grip the needle firmly without rotation. The multi-position ratchet at the base of the handle locks and releases with a single squeeze, so the operator can adjust needle angulation on the fly. The gold-anodised finger ring identifies the tungsten-carbide jaw upgrade, and the polished stainless-steel body can be cleaned in a washer-disinfector and steam-sterilised in cassettes. Supplied by Equate Instruments non-sterile for in-clinic processing.
View
Mathieu Needle Holder - Curved, Stainless Steel
This Mathieu needle holder is a spring-action surgical instrument for guiding and grasping curved suture needles during intra-oral soft-tissue closure. The serrated stainless jaws grip the needle firmly, and the integrated multi-position ratchet lock sets tension on the needle and releases with a smooth single-handed squeeze so the surgeon can regrip without losing position. The one-piece stainless-steel frame is tapered for intra-oral access and has a serrated handle spine that gives a confident fingertip grip even when fingers are wet. The complete instrument withstands routine steam sterilisation and reprocesses alongside the rest of the surgical tray.
View
Mathieu Needle Holder 14 cm - Tungsten Carbide Jaws, Gold-Finish Handles
This Mathieu needle holder is a spring-action surgical instrument for guiding and grasping curved suture needles during soft-tissue closure. The tungsten-carbide jaw inserts provide a firm, slip-resistant grip on 2-0, 3-0, and 4-0 suture needles, and the integrated ratchet lock holds the needle under controlled tension so the surgeon can regrip without dropping the needle during flap closure. The slim tapered frame works well for intra-oral surgery where access is limited, and the gold-finished handle bars give instant visual identification of TC-equipped holders on the surgical tray. Stainless construction with TC inserts withstands routine steam sterilisation so the instrument reprocesses reliably between procedures.
View
Mathieu Needle Holder - 17 cm, Tungsten Carbide, Gold Loops
The Mathieu Needle Holder is a spring-action suturing instrument used to guide and grasp surgical needles during oral and periodontal procedures. Its cross-hatched insert jaws are sized for needles held between 2-0 and 4-0 sutures, and the central ratchet lock holds the needle under consistent pressure while the operator advances the stitch. A gentle squeeze disengages the ratchet for rapid needle repositioning without releasing the needle. The slender spring handle with gold-toned finger loops delivers precise single-handed control, making the instrument well suited to restricted intraoral fields. The stainless steel body and tungsten carbide jaw inserts are fully autoclavable for routine steam sterilisation. Supplied non-sterile for clinic-based processing.
View
Mathieu Needle Holder 17 cm - Tungsten Carbide Jaws, Gold-Finish Handles
This Mathieu needle holder is a spring-action surgical instrument for guiding and grasping curved suture needles during soft-tissue closure. The tungsten-carbide jaw inserts provide a firm, slip-resistant grip on 2-0, 3-0, and 4-0 suture needles, and the integrated ratchet lock holds the needle under controlled tension so the surgeon can regrip without dropping the needle during flap closure. The slim tapered frame works well for intra-oral surgery where access is limited, and the gold-finished handle bars give instant visual identification of TC-equipped holders on the surgical tray. Stainless construction with TC inserts withstands routine steam sterilisation so the instrument reprocesses reliably between procedures.
View
Mathieu Ryder-Type Needle Holder 17 cm - Spring-Action Ratchet
The 17 cm Mathieu Ryder-Type Needle Holder is a spring-action intraoral needle driver prized for one-handed operation in tight posterior fields. A palm-closed squeeze engages the ratchet, stepping through defined clicks; a further squeeze releases the lock, letting the clinician lock and release the needle without repositioning the instrument between passes. The cross-serrated working tips grip suture needles firmly, and the slim stainless-steel shank passes comfortably through limited interocclusal space. The textured thumb ridge on the lock arm supports a confident palm grip during extended suturing. Fully autoclavable and supplied non-sterile by Equate Instruments, this Mathieu holder is a mainstay of oral-surgery and implant sets where speed and one-handed control matter.
View
Mathieu Ryder-Type Needle Holder 17 cm - TC Jaws, Gold Ratchet
This 17 cm Mathieu Ryder-Type Needle Holder is the tungsten-carbide-tipped, gold-ratchet variant of the classic palm-held intraoral needle driver. The spring-action ratchet locks and releases with successive palm squeezes, allowing one-handed needle control during suturing in the posterior arch and third-molar region where ring handles would be cumbersome. Cross-serrated TC inserts grip suture needles without wear-drift across repeated sterilisation cycles, and the gold-anodised ratchet arm flags the TC build on a sterile tray. The slim Ryder profile carries a textured thumb ridge for a steady palm grip. Fully autoclavable and supplied non-sterile by Equate Instruments as part of standard oral-surgery and implant sets.
View
Mathieu Ryder-Type Needle Holder 14 cm - Spring-Action Ratchet
The 14 cm Mathieu Ryder-Type Needle Holder is a short-pattern spring-action intraoral needle driver for fine suturing in the anterior and mid-arch regions. A palm squeeze engages the ratchet through defined clicks; a further squeeze releases the lock, so the clinician can lock and release the needle without repositioning the instrument between passes. Cross-serrated working tips secure suture needles firmly, and the compact 14 cm length keeps the operator's fingers close to the tip for delicate placement. The textured thumb ridge supports a confident palm grip. Fully autoclavable and supplied non-sterile by Equate Instruments for routine inclusion in oral-surgery and implant sets where finer control is needed.
View
Mathieu Ryder-Type Needle Holder 14 cm - TC Jaws, Gold Ratchet
The 14 cm TC-tipped Mathieu Ryder-Type Needle Holder is the short-pattern, tungsten-carbide and gold-ratchet variant of the classic palm-held intraoral needle driver. The spring-action ratchet locks and releases with successive palm squeezes, enabling one-handed needle control during delicate anterior and mid-arch suturing where ring handles would crowd the sightline. Cross-serrated TC inserts grip suture needles without wear-drift across repeated sterilisation cycles, and the gold-anodised ratchet arm flags the TC build on a sterile tray. The compact 14 cm length keeps the clinician's fingers close to the tip for fine placement, and the textured thumb ridge supports a steady palm grip. Fully autoclavable and supplied non-sterile by Equate Instruments.
View
