Flush Cut with Hold Plier (TC) .016" x .021"
The Flush Cut with Hold Plier is a tungsten carbide orthodontic cutter engineered for clean, flush trimming of round wires from 0.30 mm and rectangular wires up to 0.41 x 0.55 mm (.016" x .021"). The angled cutting head approaches the wire at a shallow angle, producing a flush cut without leaving a protruding stub, while the integrated hold recess grips the cut segment so it can be withdrawn safely from the patient's mouth. Hardened tungsten carbide inserts hold their edge through repeated cuts, and the curved ergonomic handles provide balanced control during fine work. The stainless steel body is fully autoclavable, and the instrument is supplied non-sterile by Equate Instruments for in-clinic steam sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Wire Cutter - Max 0.6 mm, 12 cm
This 12 cm light wire cutter is engineered for chairside trimming of orthodontic wires up to 0.6 mm (.023 in) in diameter. The angled cutting head closes cleanly against a tungsten-carbide insert, producing a flush edge that will not fray the wire or mar adjacent brackets. The slim teardrop handles keep the overall weight low and offer a secure thumb-and-finger grip during repeated cuts. The body is forged in stainless steel and the tungsten-carbide cutting insert preserves its edge over many more cycles than plain steel jaws, which extends useful life in high-volume orthodontic practices. Equate Instruments supplies the cutter non-sterile for processing through the clinic's standard autoclave workflow.
View
Wire Cutter 15°, Tungsten Carbide, Long-Handle Plier - Wire up to 0.30 mm (.012")
The Tungsten Carbide Wire Cutter is a slim orthodontic plier engineered for clean sectioning of light archwires and ligature wires during fitting and adjustment. Tungsten carbide cutting inserts bonded to the stainless-steel jaws hold their edge through repeated cuts on stainless-steel and nickel-titanium wires, while the angled head geometry allows the operator to cut close to the bracket slot without impinging on cheek tissue. Long pliers-style handles provide comfortable mechanical advantage and fine tactile control at the working tip, and the slim jaw profile fits between brackets or between brackets and the buccal mucosa. Machined from surgical stainless steel with tungsten carbide inserts and fully autoclavable, the cutter is supplied non-sterile by Equate Instruments for routine in-clinic reprocessing.
View
Dolphin Universal Pliers - Bend to 0.9 mm, Cut to 0.7 mm
The Dolphin Universal Plier combines wire bending and wire cutting in a single chairside instrument. The dolphin-shaped beak grips and bends round stainless archwires up to 0.9 mm, while an integrated side cutter trims the same wire up to 0.7 mm in diameter, reducing the number of plier swaps during an adjustment appointment. Equate Instruments forges this plier from hardened stainless steel with polished plain round handles. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
View
Universal Pliers - Bend to 0.9 mm, Cut to 0.7 mm
The Universal Plier combines wire bending and wire cutting in a single chairside orthodontic instrument. Its paired round-nose jaws bend round stainless archwires up to 0.9 mm into arch curvatures and loops, while an integrated side cutter trims round wire up to 0.7 mm, reducing the need to swap tools during a single adjustment appointment. Equate Instruments forges this plier from hardened stainless steel with polished plain round handles for balanced grip. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
View
Soft Wire Cutter Pliers - 0.30 mm (.012 in) Wire
The Soft Wire Cutter Plier trims stainless orthodontic soft wire and ligatures up to 0.30 mm (.012 in) in diameter. The angled shearing jaws produce a flat, burr-free cut end that reduces tissue irritation and lets the clinician tuck the wire neatly against the bracket without additional finishing. Equate Instruments forges this plier from hardened stainless steel with polished plain round handles for a secure chairside grip. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation.
View
Wire Cutter 60°, Tungsten Carbide, Long-Handle Plier - Wire up to 0.30 mm (.012")
The Tungsten Carbide Wire Cutter is a slim orthodontic plier engineered for clean sectioning of light archwires and ligature wires during fitting and adjustment. Tungsten carbide cutting inserts bonded to the stainless-steel jaws hold their edge through repeated cuts on stainless-steel and nickel-titanium wires, while the angled head geometry allows the operator to cut close to the bracket slot without impinging on cheek tissue. Long pliers-style handles provide comfortable mechanical advantage and fine tactile control at the working tip, and the slim jaw profile fits between brackets or between brackets and the buccal mucosa. Machined from surgical stainless steel with tungsten carbide inserts and fully autoclavable, the cutter is supplied non-sterile by Equate Instruments for routine in-clinic reprocessing.
View
Wire Cutter 60°, Tungsten Carbide, Long-Handle Plier - Wire up to 0.30 mm (.012")
The Tungsten Carbide Wire Cutter is a slim orthodontic plier engineered for clean sectioning of light archwires and ligature wires during fitting and adjustment. Tungsten carbide cutting inserts bonded to the stainless-steel jaws hold their edge through repeated cuts on stainless-steel and nickel-titanium wires, while the angled head geometry allows the operator to cut close to the bracket slot without impinging on cheek tissue. Long pliers-style handles provide comfortable mechanical advantage and fine tactile control at the working tip, and the slim jaw profile fits between brackets or between brackets and the buccal mucosa. Machined from surgical stainless steel with tungsten carbide inserts and fully autoclavable, the cutter is supplied non-sterile by Equate Instruments for routine in-clinic reprocessing.
View
Micro Wire Cutter Tungsten Carbide Long Handle .012"
The Micro Wire Cutter is a long-handle orthodontic plier with tungsten carbide cutting inserts calibrated for very light archwire and ligature wire up to 0.30 mm (.012"). The narrow cutting head lets the operator work in tight bracket-to-bracket gaps without disturbing adjacent components, and the hardened inserts retain a keen edge through repeated cuts on NiTi and stainless steel. The slim ergonomic handles provide a balanced grip during fine detail work, and the spring-return action auto-opens the jaws between cycles. Manufactured from corrosion-resistant stainless steel with tungsten carbide inlays, this Equate Instruments cutter is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation. Ideal for trimming light-force NiTi archwires, ligature wires, and elastomeric ties during orthodontic visits.
View
Flush Cut with Hold Plier (TC) .021" x .025"
The Flush Cut with Hold Plier is a heavier-duty tungsten carbide orthodontic cutter sized for rectangular archwires from 0.41 mm up to 0.55 x 0.64 mm (.021" x .025"). The angled cutting head delivers a flush trim with no protruding wire stub to abrade the cheek, and the integrated hold recess captures the cut segment between the jaws so it can be removed safely from the oral cavity. Hardened tungsten carbide inserts retain their edge across many cuts on stainless steel and titanium-molybdenum archwires. The ergonomic curved handles offer balanced mechanical advantage, and the corrosion-resistant stainless steel body is fully autoclavable. Supplied non-sterile by Equate Instruments for routine in-clinic steam sterilisation.
View
Micro Pin and Ligature Cutter Max 0.012 Inch Wire Tungsten-Carbide
This Micro Pin and Ligature Cutter is a slim orthodontic cutter with tungsten-carbide inserts designed to trim stainless-steel ligature wires and small pins up to 0.012 inch (0.36 mm) in diameter. The fine cutting edges give a clean shear without crushing the wire, which is critical when placing lock pins or trimming excess ligature after tying. Manufactured from stainless steel with a spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for routine in-clinic processing.
View
Mini Pin and Ligature Cutter - Tungsten Carbide, 0.30 mm / .012 in Wire
The Mini Pin and Ligature Cutter is a compact orthodontic plier with tungsten-carbide cutting inserts rated for soft wires up to 0.30 mm (0.012 in) in diameter. The carbide edges deliver a smooth, flush cut on ligature wire, elastomeric chain, and lock pins, while the slim 15-degree head angles into the buccal corridor without disturbing adjacent brackets. The plier body is stainless steel, and the gold-coated handles mark it as a tungsten-carbide edition in a mixed orthodontic kit. Equate Instruments supplies the plier non-sterile and autoclavable, ready for reuse through full orthodontic treatment cycles.
View
Pin and Ligature Cutter TC - Max 0.4 mm
This Pin and Ligature Cutter is a precision chairside plier for trimming stainless steel ligatures and orthodontic pins up to 0.4 mm (.016 in) in diameter. The tungsten-carbide cutting insert gives a clean flush cut that removes wire ends without leaving sharp, tissue-irritating projections, which is especially important when cutting beside soft tissue or a freshly placed bracket. The stainless steel body is paired with a slim teardrop handle, and the tungsten-carbide insert retains its edge over many more cycles than plain steel jaws. Equate Instruments supplies the cutter non-sterile so it can be autoclaved through the clinic's standard sterilisation workflow before each use.
View
