Williger Bone Curette 16 cm
The Williger Bone Curette 16 cm is a single-ended surgical curette for cleaning, shaping and scraping alveolar bone. The broad rounded working end removes granulation tissue, debris and loose bony fragments from extraction sockets, cyst cavities and osteotomy sites without traumatising adjacent vital structures. Machined from stainless steel with a heavy ribbed solid handle, the instrument balances in the palm during the circular scraping stroke and resists slipping in gloved hands. Supplied non-sterile and fully autoclavable, it is a dependable daily-driver in the Equate Instruments oral-surgery range for socket debridement and site preparation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Miller 8 Bone Curette - 3.5 mm
The Miller 8 Bone Curette from Equate Instruments is a double-ended dental surgical curette designed for extraction-socket debridement, removal of cystic or granulomatous tissue and general intra-oral bone curettage. Matching 3.5 mm spoon-shaped working ends on long, offset necks give straightforward access to posterior sockets and hard-to-reach alveolar recesses. The lightweight hollow stainless-steel handle, finished with a titanium-coloured striped grip, reduces hand fatigue during extended extraction sessions. Working ends are titanium coated for visibility against bone and soft tissue and to support extended edge retention. Supplied non-sterile, the instrument is fully autoclavable for routine steam sterilisation and suitable for oral surgery, periodontics and general-practice extraction work.
View
Soft Tissue Curette - Right, Hollow Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
View
Soft Tissue Curette - Left, Hollow Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
View
Soft Tissue Curette - Right, Solid Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
View
Soft Tissue Curette - Left, Solid Handle
This single-ended soft tissue curette is engineered for removing the epithelial lining and granulation tissue from periodontal pockets during open-flap surgery and degranulation procedures. The thin, sharply angled working blade enters deep intraosseous defects, while the knurled stainless-steel handle provides a tactile pen grip for controlled debridement of diseased soft tissue. Manufactured from precision-ground stainless steel and fully autoclavable, this curette is a dependable choice for periodontists and oral surgeons. Equate Instruments supplies the instrument non-sterile for the clinic's preferred sterilisation workflow.
View
Seldin Surgical Curette
The Seldin Surgical Curette is a double-ended surgical curette with angled spoon-shaped working ends engineered for debriding extraction sockets, curetting granulation tissue, and evacuating cystic remnants after tooth removal. The contra-angled ends allow the clinician to address mesial and distal socket walls without repositioning the hand, and the concave bowls cup soft tissue efficiently while leaving healthy bone intact. The slim flat handle is balanced for controlled rotational strokes inside a socket. Machined from corrosion-resistant stainless steel, the curette is fully autoclavable and supplied non-sterile by Equate Instruments for in-office sterilisation.
View
Round Scalpel Handle - Straight Standard
This straight round scalpel handle accepts standard surgical scalpel blades and is used to make precise incisions in soft tissue during oral surgery, periodontal flap design, and biopsy procedures. The round cross-section lets the clinician rotate the blade smoothly between fingertip and pen grip positions for controlled direction changes along an incision line. The handle is fabricated from stainless steel with a knurled mid-section that resists slippage when gloves are wet. A tapered lower body balances the instrument in hand. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Round Scalpel Handle 170 mm - Adjustable Blade Mount
This 170 mm round scalpel handle features an adjustable threaded blade mount that secures standard surgical scalpel blades at a firm, consistent angle for palatal and posterior incisions. Its extended length improves reach into the back of the oral cavity while the round body supports precise rotational control between fingertip and pen grip positions. The stainless-steel handle is tapered through the lower two-thirds for balance and carries a compact knurled collar near the blade mount for fingertip indexing. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Scalpel Handle No.3 - 130mm
The Scalpel Handle No.3 is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. Deep parallel finger ridges on the central section anchor the pen grip and maintain precise control during intraoral flap design, gingival incisions, frenectomies and biopsy work. The slim silhouette and balanced weight keep the blade tip under confident tactile command throughout extended procedures. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for long clinical service. Supplied non-sterile for steam sterilisation in pouches or cassettes.
View
Scalpel Handle No.3 with Ruler Scale - 130mm
The Scalpel Handle No.3 with Ruler Scale is a flat 130 mm stainless-steel surgical handle that accepts standard No.10 to No.15 surgical blades. An etched centimetre-millimetre scale runs along the flat of the handle, giving the clinician an immediate chairside reference for measuring incision length, implant-site distances or soft-tissue landmarks without reaching for a separate ruler. A ridged upper section anchors the pen grip for precise control during flap design, gingival incisions and biopsies. Crafted from high-grade stainless steel by Equate Instruments, the handle is corrosion-resistant, fully autoclavable and built for repeat steam sterilisation. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Hemingway Bone Curette 2.8 mm - Anatomical Hollow Handle
The Hemingway Curette is a double-ended surgical bone curette with opposing spoon-shaped working tips for intra-oral debridement. The shallow concave blades remove granulation tissue, soft bone fragments, and small cyst remnants from extraction sockets and minor osseous defects while leaving vital bone intact. From Equate Instruments, the curette is forged from surgical-grade stainless steel and polished for straightforward cleaning. It is fully autoclavable, supplied non-sterile for in-clinic steam sterilisation, and balanced for extended socket-preparation and cyst-enucleation workflows in oral and implant surgery.
View
