Ligature and Pin Cutter - Straight, Rivet Joint 12 cm
The Ligature and Pin Cutter in a straight 12 cm pattern is an everyday orthodontic plier for trimming stainless ligature ties and pin ends around fixed appliances. A 12 mm beak length gives a generous cutting area close to the bracket slot, and diamond-honed cutting edges deliver clean, burr-free cuts that are comfortable for the patient's cheek and lip. The rivet joint keeps the instrument light and well balanced for repeated ligation passes. Hardened insert tips from Equate Instruments are rated for soft wires up to 0.012 inch, and the full passivated stainless-steel construction is fully autoclavable. The instrument ships non-sterile so the clinic can process it through its standard sterilisation workflow.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Ligature Cutter - 45 Degree Angled, Wide Handles, Very Fine Tips
The 45 degree Angled Ligature Cutter with wide ergonomic handles and very fine tips is an orthodontic plier for trimming ligature wires and the ends of stainless ligature ties close to the bracket slot. The sharply angled cutting head brings the beaks into line with both buccal and lingual bracket surfaces, and the very fine 4.5 mm tip length reaches into tight interbracket spaces without disturbing adjacent ligatures. Hardened steel insert tips handle soft wires from 0.008 inch up to 0.012 inch, and the rivet joint keeps the cutting edges meeting precisely for clean, burr-free cuts. Equate Instruments produces the cutter in passivated stainless steel with wide handles that spread grip pressure across the palm for long ligation appointments. It ships non-sterile and is fully autoclavable.
View
Ligature and Pin Cutter - Straight, Hex Screw Joint 12 cm
The Ligature and Pin Cutter in a straight 12 cm pattern with a hex screw joint is an orthodontic plier for trimming stainless ligature ties and orthodontic pin ends around fixed appliances. The adjustable hex screw joint allows lateral play to be dialled out over time, restoring precise tip alignment as the instrument accumulates sterilisation cycles. A 12 mm beak length leaves a comfortable working area close to the bracket slot. Diamond-honed cutting edges and hardened steel insert tips from Equate Instruments produce clean, burr-free cuts on soft wires up to 0.012 inch. The passivated stainless-steel body is fully autoclavable, and the instrument ships non-sterile so the clinic can process it in its preferred sterilisation workflow.
View
Mini Ligature and Pin Cutter - Straight, Slim Beak 12.5 cm
The Mini Ligature and Pin Cutter in a straight slim-beak pattern is a 12.5 cm orthodontic plier for precise trimming of stainless ligature ties and pin ends in crowded bracket arrays. The slim 8 mm beaks reach into tight interbracket spaces without disturbing adjacent ligatures, and diamond-honed cutting edges deliver clean, burr-free cuts that are comfortable for the patient's soft tissue. A precision box joint keeps handle travel play-free, and the lower third of each handle is gold-plated for fast identification on a procedure tray. Hardened insert tips from Equate Instruments are rated for soft wires up to 0.012 inch. The passivated stainless-steel body is fully autoclavable and supplied non-sterile for in-office processing.
View
Mini Ligature and Pin Cutter - 15 Degree Angled, Slim Beak 12.5 cm
The Mini Ligature and Pin Cutter in a 15 degree angled slim-beak pattern is a 12.5 cm orthodontic plier for precise trimming of stainless ligature ties and pin ends around posterior brackets. The modest 15 degree head angle brings the cutting edges in line with the bracket slot without requiring the operator to twist the wrist, while slim 8 mm beaks reach into tight interbracket spaces. Diamond-honed edges and hardened steel insert tips from Equate Instruments cleanly cut soft wires up to 0.012 inch, producing burr-free ends that are comfortable for the patient's cheek and lip. The rivet joint keeps the cutter light and balanced, and the passivated stainless-steel body is fully autoclavable and supplied non-sterile for in-office processing.
View
Ligature and Pin Cutter - Wide Beak, 15 Degree Angled 12.5 cm
The Ligature and Pin Cutter in a wide-beak 15 degree angled pattern is a 12.5 cm orthodontic plier for trimming stainless ligature ties and pin ends with added beak mass for durability. The wider beak profile delivers a more robust cutting edge for clinicians who cut ligatures frequently throughout the day, and the 15 degree head angle aligns the edges with posterior bracket slots without requiring wrist rotation. Diamond-honed edges and hardened steel insert tips cut soft wires up to 0.012 inch with clean, burr-free results. Equate Instruments builds the cutter in passivated stainless steel around a rivet joint for a balanced feel, and the instrument is fully autoclavable and ships non-sterile for routine in-office sterilisation.
View
Ligature and Pin Cutter - Box Joint, Gold-Plated Handles 12.5 cm
The Ligature and Pin Cutter with a precision box joint is a 12.5 cm orthodontic plier for accurate trimming of stainless ligature ties and pin ends around fixed appliances. The precision box joint keeps the cutting beaks in rigid alignment under repeated closing force, so the 9.5 mm beaks continue to meet squarely and produce clean, burr-free cuts over many sterilisation cycles. Diamond-honed edges and hardened steel insert tips from Equate Instruments cut soft wires up to 0.012 inch. The lower third of each handle is gold-plated for rapid identification on a procedure tray, and the passivated stainless-steel body is fully autoclavable and supplied non-sterile for in-clinic sterilisation.
View
Ligature and Pin Cutter - 15 Degree Angled, Rivet Joint 12 cm
The Ligature and Pin Cutter in a 15 degree angled 12 cm pattern is an orthodontic plier for trimming stainless ligature ties and pin ends around fixed appliances. The modest head angle aligns the cutting edges with posterior bracket slots without requiring wrist rotation, and a 12 mm beak length gives a generous working area close to the bracket. Diamond-honed edges and hardened steel insert tips from Equate Instruments produce clean, burr-free cuts on soft wires up to 0.012 inch. The rivet joint keeps the instrument light and balanced for repeated ligation passes, and the passivated stainless-steel body is fully autoclavable and supplied non-sterile so the clinic can process it through its standard sterilisation workflow.
View
Ligature and Pin Cutter - 15 Degree Angled, Hex Screw Joint 12 cm
The Ligature and Pin Cutter in a 15 degree angled 12 cm pattern with a hex screw joint is an orthodontic plier for precise trimming of stainless ligature ties and pin ends. The adjustable hex screw joint lets lateral play be dialled out over the instrument's service life, keeping the cutting edges meeting squarely even after many sterilisation cycles. Equate Instruments pairs a 12 mm diamond-honed beak with hardened steel insert tips that cleanly cut soft wires up to 0.012 inch. The 15 degree head angle aligns the edges with posterior bracket slots without wrist rotation, and the passivated stainless-steel body is fully autoclavable and supplied non-sterile so the clinic can process it in its preferred sterilisation workflow.
View
Micro Ligature & Pin Cutters 15 Degree Angled 11.5cm
The Micro Ligature and Pin Cutters are orthodontic pliers engineered to sever ligature wires, band ties, and light-gauge pins during active orthodontic appointments. The precision-ground cutting beaks carry Immunity-HS steel tip inserts with diamond-honed edges for clean, burr-free cuts on soft wires up to approximately 0.012 inches, and the angled head allows intraoral access without obstructing line of sight. Equate Instruments builds the body from passivated stainless steel and quality-controls every unit with shape, boil, and performance tests. Individually packed, non-sterile, reusable, latex-free, and suitable for left- or right-hand use.
View
Mini Ligature Cutter - 15 Degree, Light Model 11.5 cm
The Mini Ligature Cutter in a 15 degree angled light-model pattern is an 11.5 cm orthodontic plier sized for clinicians who trim ligature ties all day long. The lightweight head and narrow handle profile reduce hand fatigue during repeated ligation passes, while the 15 degree angle brings the cutting edges in line with posterior bracket slots without wrist rotation. A 9.5 mm beak length with diamond-honed edges and hardened steel insert tips from Equate Instruments produces clean, burr-free cuts on soft wires up to 0.012 inch. The rivet joint keeps articulation smooth and light, and the passivated stainless-steel body is fully autoclavable and supplied non-sterile for in-office processing.
View
Micro Ligature & Pin Cutters 15 Degree Angled 11.5cm
The Micro Ligature and Pin Cutters are orthodontic pliers engineered to sever ligature wires, band ties, and light-gauge pins during active orthodontic appointments. The precision-ground cutting beaks carry Immunity-HS steel tip inserts with diamond-honed edges for clean, burr-free cuts on soft wires up to approximately 0.012 inches, and the angled head allows intraoral access without obstructing line of sight. Equate Instruments builds the body from passivated stainless steel and quality-controls every unit with shape, boil, and performance tests. Individually packed, non-sterile, reusable, latex-free, and suitable for left- or right-hand use.
View
Micro Mini Ligature Cutter - 15 Degree Angled 11 cm
The Micro Mini Ligature Cutter in a 15 degree angled 11 cm pattern is a compact orthodontic plier sized for the smallest bracket systems and paediatric arches. The short overall length and small 8 mm angled beaks reach into tight interbracket spaces where a standard cutter cannot seat, and the 15 degree head angle aligns the edges with posterior bracket slots without wrist rotation. Diamond-honed cutting edges and hardened steel insert tips from Equate Instruments cleanly cut soft wires up to 0.012 inch with burr-free ends that are comfortable for the patient's cheek and lip. The rivet-joint passivated stainless body is fully autoclavable and supplied non-sterile for in-office sterilisation.
View
