UNC Periodontal Probe CP 15 - Hollow Handle
The CP 15 is a single-ended UNC-style periodontal probe engraved with millimetre markings from 1 to 15 mm for detailed assessment of probing pocket depth, clinical attachment loss, and recession. The long thin working end reaches deep sulci and furcation defects without obscuring the markings against the gingival margin. The probe is mounted on a hollow stainless-steel handle with a ribbed mid-section and a tapered lower barrel for balance in pen grip. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles, giving hygienists and general dentists a reliable daily diagnostic tool.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
North Carolina UNC-15 Periodontal Probe
The North Carolina UNC-15 is a single-ended periodontal probe used to measure pocket depth and assess periodontal attachment during examination and recall appointments. The thin, blunt working tip is laser-etched with black markings at every millimetre from 1 to 15 mm, allowing precise reading of pocket depth, clinical attachment level, and gingival recession across all six sites per tooth. Forged from stainless steel for durability, the probe pairs with a silicone-sleeved hollow handle from Equate Instruments for steady fingertip control during charting. Supplied non-sterile and fully autoclavable, so it integrates cleanly into standard examination and hygiene cassettes.
View
WHO CPI Probe CP 11.5 Ball-End - Hollow Handle
The CP 11.5 WHO probe is a single-ended periodontal probe built to WHO Community Periodontal Index specifications, with a 0.5 mm ball tip and a black reference band between 3.5 and 5.5 mm. The ball end limits sulcular trauma during probing and gives a cleaner tactile picture of pocket depth and subgingival calculus. Markings support CPI-style screening, probing pocket depth, and detecting bleeding on probing during periodontal assessments. The probe is carried on a hollow stainless-steel handle with gold accent rings and a tapered lower barrel for balance. Supplied non-sterile by Equate Instruments and fully autoclavable for standard steam-sterilisation cycles.
View
Periodontal Probe CP 18 - Titanium-Coated
This periodontal probe is designed for accurate assessment of pocket depth, clinical attachment level, gingival bleeding, and furcation involvement. The slim working tip carries laser-etched graduations at diagnostic intervals, with high-contrast colour bands visible at chairside distance so the clinician can read pocket measurements without repositioning the patient. A fine rounded terminus slides gently to the base of the sulcus without perforating the junctional epithelium. Manufactured from corrosion-resistant stainless steel and fully autoclavable, this periodontal probe from Equate Instruments is a daily-use diagnostic tool for general dentists, dental hygienists, and periodontists during comprehensive exams, recall visits, and periodontal charting. Supplied non-sterile for in-clinic steam sterilisation.
View
Periodontal Probe CP12/#23 - Solid Knurled Handle
The Periodontal Probe CP12/#23 is a double-ended diagnostic instrument used to measure periodontal pocket depth and assess clinical attachment levels, paired with a #23 shepherd-hook explorer for caries detection. The CP12 working end carries classic colour-banded markings at 3, 6, 9 and 12 mm for rapid pocket charting, while the opposite end offers a fine curved explorer tip for tactile detection of carious lesions and margin integrity. Both working ends are machined from surgical-grade stainless steel and ground to a consistent profile so markings read reliably throughout reprocessing. The solid knurled handle delivers a stable grip during probing, and the instrument is fully autoclavable between patients. Equate Instruments finishes each probe by hand to keep mm graduations and the explorer tip predictable across the clinical life of the instrument.
View
Williams Periodontal Probe - Hollow Handle 10mm
The Williams Periodontal Probe is a single-ended measuring instrument calibrated at 1, 2, 3, 5, 7, 8, 9 and 10 mm, with the 4 and 6 mm lines intentionally omitted for clearer visual reading. Clinicians use it to chart periodontal pocket depth, attachment loss, gingival recession and bleeding indices during periodontal assessment. Crafted from stainless steel with a 10 mm hollow handle and grooved ergonomic grip, the probe offers tactile feedback without excess weight during extended exams. Equate Instruments supplies it non-sterile and fully autoclavable for routine clinic sterilisation.
View
Williams Periodontal Probe - Knurled Solid Handle
The Williams Periodontal Probe is a single-ended hand probe for measuring pocket depth and charting attachment loss across every surface of the dentition. Its round slender working tip carries the classic Williams millimetre pattern at 1, 2, 3, 5, 7, 8, 9 and 10 mm, with the 4 and 6 mm marks intentionally omitted so depth reads cleanly against the gingival margin. The round knurled solid handle gives a light, tactile grip during full-mouth periodontal charting, and the overall balance keeps the tip controlled as the clinician walks around the sulcus. Manufactured from stainless steel by Equate Instruments and fully autoclavable, it is a reliable daily-driver for hygienists and general dentists running initial and recall periodontal assessments. Supplied non-sterile for in-clinic steam sterilisation.
View
CP-12 Colour-Coded Periodontal Probe - Hollow Handle 10mm
The CP-12 is a single-ended colour-coded periodontal probe with banded markings at 3, 6, 9 and 12 mm. The wide colour bands speed up visual reading during full-mouth periodontal charting and make it easier for assistants to call out pocket depths during four-handed probing. Made from stainless steel with a 10 mm hollow handle and grooved ergonomic grip, the probe is lightweight for repeat use across a full periodontal chart. Equate Instruments supplies it non-sterile and fully autoclavable for standard in-clinic sterilisation.
View
WHO CPI Periodontal Probe - Hollow Handle 8mm
The WHO CPI Probe is a single-ended periodontal probe with a 0.5 mm ball-end tip and calibrated markings at 3.5, 5.5, 8.5 and 11.5 mm. The ball end minimises soft-tissue trauma and improves tactile perception of sub-gingival calculus during periodontal screening and examinations such as BPE or CPITN recording. Crafted from stainless steel with an 8 mm hollow handle and knurled grip, the probe is lightweight and balanced for full-mouth screening. Equate Instruments supplies it non-sterile and fully autoclavable for standard clinic sterilisation.
View
CP-11 Colour-Coded Periodontal Probe - Hollow Handle 10mm
The CP-11 is a single-ended colour-coded periodontal probe with banded markings at 3, 6, 8 and 11 mm. Its blunt tip and wide colour bands simplify pocket depth reading during full-mouth charting and periodontal maintenance visits. Made from stainless steel with a 10 mm hollow handle and knurled ergonomic grip, the probe is lightweight for repeat use across a complete chart. Equate Instruments supplies it non-sterile and fully autoclavable for routine clinic sterilisation.
View
Nabers Furcation Probe - Solid Handle 6mm
The Nabers Furcation Probe is a double-ended curved probe designed specifically to follow the anatomy of multi-rooted teeth and detect furcation involvement in molars and premolars. Each working end offers a smoothly curved tip with calibrated markings that allow the clinician to grade furcation lesions according to the Hamp, Glickman or Lindhe classification systems. Built from stainless steel with a 6 mm ridged solid handle and knurled grip, the instrument is balanced for tactile control during periodontal assessment. Equate Instruments supplies it non-sterile and fully autoclavable for routine clinic sterilisation.
View
Periodontal Probe CP 18 - Stainless Knurled Handle
This periodontal probe is designed for accurate assessment of pocket depth, clinical attachment level, gingival bleeding, and furcation involvement. The slim working tip carries laser-etched graduations at diagnostic intervals, with high-contrast colour bands visible at chairside distance so the clinician can read pocket measurements without repositioning the patient. A fine rounded terminus slides gently to the base of the sulcus without perforating the junctional epithelium. Manufactured from corrosion-resistant stainless steel and fully autoclavable, this periodontal probe from Equate Instruments is a daily-use diagnostic tool for general dentists, dental hygienists, and periodontists during comprehensive exams, recall visits, and periodontal charting. Supplied non-sterile for in-clinic steam sterilisation.
View
Williams Periodontal Probe - 6 mm Solid Handle
The Williams Periodontal Probe is a single-ended diagnostic instrument used to measure sulcus depth, chart attachment loss, and assess gingival recession. Its working end carries the classic Williams markings at 1, 2, 3, 5, 7, 9, and 10 mm, giving the clinician a consistent visual reference when recording periodontal readings. Built by Equate Instruments from hardened stainless steel with a slim fine-ribbed 6 mm solid handle, the probe is balanced for repeated full-mouth charting. It is fully autoclavable and supplied non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
