Endodontic Explorer No.9
The Endodontic Explorer No.9 is a single-ended diagnostic instrument engineered to open and locate small canal orifices during endodontic access, and to detect caries, calculus and restorative defects on tooth surfaces. Its slender angled working tip transmits clear tactile feedback, letting the operator trace the pulp chamber floor and map canal entries with minimal pressure on the tooth. The working end is titanium-coated for corrosion resistance and a reduced thermal feel, and sits on a slim 9.5 mm hollow handle engineered for low mass and a stable fingertip grip. Fully autoclavable, supplied non-sterile by Equate Instruments for in-clinic steam sterilisation in pouches or cassettes.
Specifications
MaterialTitaniumRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Endodontic Explorer No.8
The Endodontic Explorer No.8 is a single-ended diagnostic instrument used to locate canal orifices, explore furcations and evaluate calculus, caries and restorative margins on tooth surfaces. Its fine angled working tip transmits clear tactile feedback, letting the operator catch small irregularities in the pulp chamber floor or along the cement-enamel junction with minimal pressure on the tooth. The working end is titanium-coated for corrosion resistance and a reduced thermal feel, and sits on a slim 9.5 mm hollow handle engineered for low mass and a stable fingertip grip. Fully autoclavable, supplied non-sterile by Equate Instruments for in-clinic steam sterilisation.
View
Root Canal Explorer
A Root Canal Explorer is a fine-tipped endodontic instrument used to locate and open root canal orifices in the pulp chamber floor during endodontic access. Its long, sharp working ends give the clinician tactile feedback to detect canal entrances, negotiate calcified ledges, and remove traces of calcification without enlarging the orifice unnecessarily. This Equate Instruments explorer is mounted on an ergonomic moulded grip designed for fine-motor control during canal location. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in trays or cassettes.
View
Root Canal Explorer
The Root Canal Explorer is a fine-tipped endodontic instrument used to locate and open root canal orifices in the pulp chamber floor during endodontic access. Its long, sharp working ends give the clinician tactile feedback to detect canal entrances, negotiate calcified ledges, and remove traces of secondary dentin without enlarging the orifice unnecessarily. This Equate Instruments explorer is mounted on an ergonomic moulded grip designed for fine-motor control during canal location. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in trays or cassettes.
View
Root Canal Explorer Light Blue
The Root Canal Explorer is a fine-tipped endodontic instrument used to locate and open root canal orifices in the pulp chamber floor during endodontic access. Its long, sharp working ends give the clinician tactile feedback to detect canal entrances, negotiate calcified ledges, and remove traces of secondary dentin without enlarging the orifice unnecessarily. This Equate Instruments explorer is mounted on a slim light-blue ergonomic grip designed for fine-motor control during canal location. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in trays or cassettes.
View
Bone File Fig.2 Rasp Hollow Handle 10mm
The Bone File with Rasp Hollow Handle is a double-ended surgical file used during oral and periodontal surgery to smooth sharp bone edges, refine osseous margins around extraction sockets, and finish the alveolar ridge before flap closure. Each tip carries a raised rasp of precision-cut teeth that abrades bone with a directional stroke, while the opposing end offers a complementary cut pattern for detailed work in tight anatomy. The lightweight hollow stainless-steel handle is knurled for a secure grip during tactile, low-force filing, reducing operator fatigue during extended procedures. Forged stainless steel resists corrosion and tolerates repeated steam sterilisation. Supplied non-sterile, this Equate Instruments bone file is specified for reusable surgical workflows in cassettes or pouches.
View
Root Canal Stopper 0.5 mm - C8 Hollow Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C8 lightweight hollow knurled stainless-steel handle that reduces hand fatigue during extended endodontic sessions, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
View
Root Canal Stopper 0.6mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
View
Root Canal Stopper 0.7mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
View
Root Canal Stopper 0.9mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
View
Root Canal Stopper 1.2mm
This root canal stopper is a depth-control instrument used during endodontic obturation to mark and reference working length on gutta-percha master cones and hand files. The precision bent tip sits against the coronal landmark while the operator verifies apical seat during canal filling. The lightweight knurled hollow handle delivers a stable tactile grip during fine movements inside the canal system. Built from autoclavable stainless steel, this Equate Instruments stopper is designed for repeated steam sterilisation and daily chairside endodontic use.
View
Root Canal Stopper 0.5 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
View
Root Canal Stopper 0.6 mm - C6 Solid Handle
Root canal stoppers are endodontic hand instruments used to pre-set and verify working length during obturation and paste placement inside prepared canals, with the slim pre-angled stainless-steel tip carrying a rubber stop that can be positioned to the measured working length while the fine cone-form shank reaches into narrow and curved canal anatomy without binding on the canal walls. Equate Instruments manufactures these stoppers with a C6 solid knurled stainless-steel handle sized for fine finger control during delicate intracanal work, fully autoclavable, supplied non-sterile, and intended for endodontists and general dentists performing primary and retreatment root-canal therapy.
View
