Buser Periosteal Elevator 17.5cm - Anatomical Hollow Handle
The Buser Periosteal Elevator 17.5 cm is a double-ended surgical instrument designed for reflecting and retracting mucoperiosteum during flap surgery, osseous procedures and implant site exposure. One working end features a sharp pointed blade suited to interproximal release and precise papilla reflection, while the opposite end offers a rounded blade for broader periosteal elevation along the bone. Crafted from stainless steel with an anatomical hollow handle, the instrument is balanced for controlled leverage in the operator's hand. Equate Instruments supplies it non-sterile and fully autoclavable for standard clinic sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Buser Periosteal Elevator
The Buser periosteal elevator is a double-ended surgical hand instrument used to start and continue periosteal release during oral surgery and implant site preparation. One end carries a sharper, narrower blade that initiates the release at the crestal incision, and the opposite end carries a broader curved blade that continues elevating the flap across the underlying bone. The working ends are forged from stainless steel and retain a clean edge across repeat use, while the silicone-sleeved hollow handle from Equate Instruments keeps the instrument balanced and comfortable during extended flap work. Supplied non-sterile and fully autoclavable.
View
Buser Periosteal Elevator 18 cm - Anatomical Hollow Handle 10 mm
The Buser 18 cm Periosteal Elevator is a double-ended mucoperiosteal elevator used to raise and reflect full-thickness flaps around implant and periodontal surgical sites. Each end carries a differently shaped thin blade: one broader oval paddle to initiate reflection along the alveolar crest and one narrower leaf-shaped blade to work interproximally and against the papilla without stretching the flap. The 10 mm anatomical hollow handle is knurled along its length to provide a steady wet grip and reduce hand fatigue during long procedures. Machined from corrosion-resistant stainless steel, the elevator is fully autoclavable and supplied non-sterile by Equate Instruments for in-office sterilisation.
View
Buser Periosteal Elevator 3/4 mm Black-Coated - Anatomical Hollow Handle 10 mm
The Buser 3/4 mm Periosteal Elevator with Black-Coated Tips is a double-ended mucoperiosteal elevator whose working ends receive a non-reflective black surface treatment that reduces glare under operatory lighting and improves tip visibility against soft tissue. The 3 mm and 4 mm gently sigmoid blades reflect crestal and interproximal tissue through a single grip without reorientation. The 10 mm anatomical hollow handle is knurled along its length for a secure wet grip and reduced hand fatigue. Machined from stainless steel with a black coating on the working tips only, the elevator is autoclavable and supplied non-sterile by Equate Instruments for in-office reprocessing.
View
Micro Surgical Periosteal Elevator 2.8/1.8mm - Titanium-Coated
The Micro Surgical Periosteal Elevator 2.8/1.8mm is a double-ended microsurgical flap instrument used to reflect mucoperiosteum from bone with minimal trauma. Its two slim working tips (a broader 2.8 mm end and a finer 1.8 mm end) access tight interdental, papillary and apical regions while preserving soft-tissue integrity. The contours are engineered for precise periosteal lifting during flap surgery, implant exposure and periapical procedures. A titanium nitride-style coating on the blades improves edge stability and cuts glare under operating-light conditions. The knurled handle with colour-banded tactile rings keeps the instrument light in hand during delicate microsurgery. Supplied non-sterile, the elevator is fully autoclavable and belongs in any Equate Instruments micro-surgical flap tray.
View
Molt 9 Periosteal Elevator, 4mm/7mm Ends, Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
Periosteal Elevator 24G 4mm/4mm 17.5cm Hollow Handle Blue
The Periosteal Elevator 24G is a double-ended surgical instrument engineered for mucoperiosteal flap reflection during extractions, periodontal flap surgery, and implant site preparation. The two 4 mm working tips, one chisel-shaped and one rounded spoon, allow clinicians to separate soft tissue from cortical bone with balanced pressure distribution and minimal trauma to the flap margins. Built on a lightweight 10 mm hollow handle with circumferential grooves, this 17.5 cm instrument from Equate Instruments keeps hand fatigue low during long surgical cases. The titanium working ends carry a blue anodised finish for reduced glare under operating-room illumination and increased surface hardness for wear resistance. It is fully autoclavable and supplied non-sterile for in-clinic processing.
View
Freer Periosteal Elevator - Titanium-Coated Hollow Handle
The Freer Periosteal Elevator is a double-ended hand instrument for separating, elevating and retracting soft tissue and periosteum during surgical extractions, implant placement and flap procedures. Both working ends carry a rounded spatula blade - one more rounded and one closer to straight - so the clinician can scrape cortical bone, dissect fibrous attachments and advance the flap without tearing the periosteum. This variant is finished with a titanium coating that gives the working tips their deep-blue colour, improving visual contrast against blood-field and bone while preserving the stainless substrate's autoclavability. The 9.5 mm hollow banded handle is light in the hand with stacked contrast rings that aid tactile orientation. Equate Instruments builds it for clinicians who want a colour-contrasted versatile flap elevator.
View
Freer Double-Ended Periosteal Elevator - Titanium Coated
The Freer periosteal elevator is a double-ended surgical instrument designed for the precise separation and elevation of soft tissue and periosteum from underlying bone. One end carries a rounded spatulate blade suited to gentle blunt dissection, while the opposite end offers a slightly sharper spatulate edge for lifting adherent periosteum along cortical bone. The working ends are titanium-coated for reduced tissue adhesion and controlled glide across wet bone. A hollow lightweight handle with a knurled grip zone helps reduce hand fatigue during flap elevation and multi-site osseous surgery. Equate Instruments supplies this elevator non-sterile for clinic-side steam sterilisation.
View
Pritchard Periosteal Elevator 10mm/4.5mm - 19cm Hollow Handle
The Pritchard Periosteal Elevator is a double-ended flap-reflection instrument used to lift and detach mucoperiosteum adhered to bone on palatal and vestibular surfaces. The broad 10 mm paddle-shaped end reflects the flap cleanly once the initial incision has been made, while the narrow 4.5 mm end reaches papillae, alveolar crests and tight lingual corners that the larger blade cannot enter. The 19 cm overall length is well balanced for full-arch flap work. Machined from surgical-grade stainless steel, the instrument is fully autoclavable and features a lightweight anatomical hollow handle with stepped contours for a secure grip. Equate Instruments finishes each working edge for smooth tissue contact that minimises flap tearing during periodontal, implant and extraction procedures.
View
Periosteal Molt 3.3/2.8mm
The Periosteal Molt 3.3/2.8 mm is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during flap surgery, tunnelling procedures, and blunt tissue reflection. Its narrow curved 3.3 mm and 2.8 mm working tips allow controlled subperiosteal elevation in confined access windows, supporting tunnel-style pouch preparation around anterior teeth. This Equate Instruments elevator is mounted on a lightweight hollow handle with a knurled finish for reliable tactile orientation in wet surgical fields. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in surgical trays or cassettes.
View
Periosteal Molt 7/5mm 18.5cm Hollow Handle 10mm
The Periosteal Molt is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during surgical extractions and flap surgery. Its two working tips support controlled subperiosteal elevation and minimise tearing when the gum flap is lifted, giving clinicians predictable access to underlying alveolar bone. This Equate Instruments elevator is built on a lightweight 10 mm hollow stainless-steel handle with circumferential grooves for tactile orientation in wet surgical fields, measuring 18.5 cm overall. It is fully autoclavable and supplied non-sterile for in-clinic processing in surgical trays or cassettes.
View
Periosteal Elevator 24G 4mm/4mm
The Periosteal Elevator 24G is a double-ended surgical instrument engineered for mucoperiosteal flap reflection during extractions, periodontal flap surgery, and implant site preparation. Its 4 mm working tips separate soft tissue from cortical bone with balanced pressure distribution and minimal trauma to the flap margins, supporting predictable access to the underlying alveolar bone. This Equate Instruments elevator is built for reliable tactile feedback during extended surgical cases. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in surgical trays or cassettes.
View
