Periosteal Elevator 24G 4mm/4mm
The Periosteal Elevator 24G is a double-ended surgical instrument engineered for mucoperiosteal flap reflection during extractions, periodontal flap surgery, and implant site preparation. Its 4 mm working tips separate soft tissue from cortical bone with balanced pressure distribution and minimal trauma to the flap margins, supporting predictable access to the underlying alveolar bone. This Equate Instruments elevator is built for reliable tactile feedback during extended surgical cases. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in surgical trays or cassettes.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Molt 9 Periosteal Elevator, 4mm/7mm Ends, Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
Periosteal Elevator 24G 4mm/4mm 17.5cm Hollow Handle Blue
The Periosteal Elevator 24G is a double-ended surgical instrument engineered for mucoperiosteal flap reflection during extractions, periodontal flap surgery, and implant site preparation. The two 4 mm working tips, one chisel-shaped and one rounded spoon, allow clinicians to separate soft tissue from cortical bone with balanced pressure distribution and minimal trauma to the flap margins. Built on a lightweight 10 mm hollow handle with circumferential grooves, this 17.5 cm instrument from Equate Instruments keeps hand fatigue low during long surgical cases. The titanium working ends carry a blue anodised finish for reduced glare under operating-room illumination and increased surface hardness for wear resistance. It is fully autoclavable and supplied non-sterile for in-clinic processing.
View
Periosteal Molt 3.3/2.8mm
The Periosteal Molt 3.3/2.8 mm is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during flap surgery, tunnelling procedures, and blunt tissue reflection. Its narrow curved 3.3 mm and 2.8 mm working tips allow controlled subperiosteal elevation in confined access windows, supporting tunnel-style pouch preparation around anterior teeth. This Equate Instruments elevator is mounted on a lightweight hollow handle with a knurled finish for reliable tactile orientation in wet surgical fields. Crafted from autoclavable stainless steel, it is supplied non-sterile for in-clinic processing in surgical trays or cassettes.
View
Periosteal Molt 7/5mm 18.5cm Hollow Handle 10mm
The Periosteal Molt is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during surgical extractions and flap surgery. Its two working tips support controlled subperiosteal elevation and minimise tearing when the gum flap is lifted, giving clinicians predictable access to underlying alveolar bone. This Equate Instruments elevator is built on a lightweight 10 mm hollow stainless-steel handle with circumferential grooves for tactile orientation in wet surgical fields, measuring 18.5 cm overall. It is fully autoclavable and supplied non-sterile for in-clinic processing in surgical trays or cassettes.
View
Molt Periosteal Elevator, 7mm/5mm Ends, Solid Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
Molt Periosteal Elevator 4mm/4mm 18.5cm Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument with 4 mm working blades at each tip for lifting mucoperiosteal flaps during oral and implant surgery. The 18.5 cm overall length and 10 mm hollow knurled handle balance the instrument for controlled pressure along the bone while keeping hand fatigue low during extended cases. Both working ends deliver the classic Molt blade geometry, slightly rounded for atraumatic sliding between periosteum and cortical bone. Forged from surgical-grade stainless steel, it is fully autoclavable and supplied non-sterile for in-clinic reprocessing.
View
Molt 9 Periosteal Elevator, 4mm/7mm Ends, Hollow Handle - Blue
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
Periosteal Molt 7/5mm 18.5cm Hollow Handle 10mm Blue
The Periosteal Molt is a double-ended surgical elevator designed for retracting and reflecting the mucoperiosteum during surgical extractions and flap surgery. Its two working tips support controlled subperiosteal elevation and minimise tearing when the gum flap is lifted, giving clinicians predictable access to underlying alveolar bone. This Equate Instruments elevator is built on a lightweight 10 mm hollow stainless-steel handle with circumferential grooves for tactile orientation, measuring 18.5 cm overall. The working ends carry a blue titanium-nitride surface finish to reduce glare under operating-room illumination. It is fully autoclavable and supplied non-sterile for in-clinic processing.
View
Periosteal Elevator Mead 7mm/5.5mm 19.5cm Hollow Handle
The Mead Periosteal Elevator is a double-ended surgical elevator used to reflect mucoperiosteal flaps, separate periosteum from bone, and assist with luxation prior to tooth extraction. The 7 mm working end carries a broad flat blade for fast, wide reflection across the buccal cortex, while the 5.5 mm end offers a narrower spatulated tip for delicate work around papillae and at the line angles of molars. Both ends are ground from a single piece of stainless steel, with a 19.5 cm lightweight hollow handle that features knurled rings and ergonomic bulbs for a secure, fatigue-reducing grip. Fully autoclavable, cassette-compatible, and supplied non-sterile. An everyday surgical elevator from Equate Instruments.
View
Periosteal Elevator Howard 7mm/7mm 19.5cm Hollow Handle
The Howard Periosteal Elevator is a double-ended surgical elevator used to reflect mucoperiosteal flaps and separate periosteum from cortical bone. Both working ends carry a 7 mm spatulated blade - one straight, one contoured - allowing the clinician to switch between broad sweep strokes and directional lifting without reaching for a second instrument. The matched 7 mm blades are ground from a single piece of stainless steel and mounted on a 19.5 cm hollow handle with knurled rings and ergonomic bulbs for a light, balanced grip. Fully autoclavable, cassette-compatible, and supplied non-sterile. A reliable surgical workhorse from Equate Instruments.
View
Molt Periosteal Elevator Fig. M9 - Titanium Plasma Blue, 6 mm Solid Handle
The Molt M9 is a double-ended periosteal elevator used to reflect mucoperiosteal flaps during extractions, implant placement and periodontal surgery. One end is a broad rounded spoon that lifts full-thickness flaps from bone without tearing, while the opposite end is a slim pointed blade that separates tight papillae and interproximal attachments. The 6 mm solid stainless-steel handle is knurled for a confident wet grip, and both working ends are finished in titanium plasma blue to resist corrosion and remain visible in a bloody field. Equate Instruments supplies the elevator non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Molt 4 Periosteal Elevator, 4mm/8mm Ends, Suture-Hole Hollow Handle
The Molt Periosteal Elevator is a double-ended surgical hand instrument used to reflect and retract mucoperiosteum cleanly from the underlying alveolar bone before extraction, bone grafting, or implant placement. Its working tips carry the classic Molt geometry - a narrower apical end that slides between bone and periosteum to initiate the flap, and a broader edge on the opposite end that advances and lifts the tissue along the buccal or lingual plate with minimal tearing. The instrument is machined from surgical stainless steel and is fully autoclavable for routine reuse. Equate Instruments stocks the Molt elevator in multiple figures and handle styles so that surgeons, periodontists, and implantologists can match the working-end width to the flap design and the handle diameter to their preferred grip.
View
