Mayo Suture Scissors TC - Straight
The Mayo Scissor is a heavy-duty straight surgical scissor used for cutting sutures, tough fibrous tissue, and surgical dressings during oral and periodontal surgery. The straight blunt-blunt blades close along a broad contact line that produces sharp, clean cuts through suture material and fibrous tissue without crushing or chewing the ends, while the oversized eye rings support the thumb-and-ring-finger technique clinicians use during extended procedures. The blade inserts are faced with tungsten carbide for a harder cutting edge that resists dulling across repeated sterilisation cycles, and the gold-coloured finger rings visually mark the instrument as tungsten-carbide grade during tray set-up. Supplied non-sterile and fully autoclavable, the Mayo scissors are offered by Equate Instruments for general dental, oral-surgery, and periodontal suture management.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
LaGrange TC Suture Scissors Curved - 11 cm
The LaGrange TC Suture Scissors Curved is an 11 cm intraoral suture scissor with a double-curved blade profile and tungsten carbide cutting inserts brazed into the blade edges. The sharp curved beak follows the arch of the palate or the curve of a posterior flap so the operator can trim sutures and fine tissue at a natural hand angle, and the TC inserts hold their edge through repeated autoclave cycles far longer than plain stainless blades. Gold-plated ring handles flag the TC variant at a glance across a tray. This Equate Instruments scissor is supplied non-sterile and is fully autoclavable for in-clinic steam sterilisation.
View
LaGrange Double-Curved Suture Scissors - 11.5 cm
The LaGrange Double-Curved Suture Scissors is an 11.5 cm intraoral scissor with a distinctive S-curve blade that sweeps past the shaft so the tip can reach over tissue without the operator's hand blocking the surgical site. The fine pointed beak cuts sutures flush to the knot and trims delicate gingival margins during periodontal flap surgery. Ring handles and a balanced finger-ball pivot give predictable two-finger control, and the corrosion-resistant stainless steel body is fully autoclavable between patients. This Equate Instruments scissor is supplied non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
LaGrange TC Suture Scissors - Black Coated
The LaGrange TC Suture Scissors with Black Coating is a double-curved intraoral scissor fitted with tungsten carbide cutting inserts and finished with a low-reflectivity black coating over the stainless steel body. The black surface cuts operating-light glare at the surgical field, and the tungsten carbide inserts hold their edge far longer than plain stainless blades through repeated autoclave cycles. The S-curve blade follows the palatal arch and posterior flap contour so the operator can trim sutures flush and clean gingival margins without obstructing the line of sight. This Equate Instruments scissor is supplied non-sterile and is fully autoclavable for in-clinic steam sterilisation.
View
Iris Suture Scissors Straight
The Iris Suture Scissors Straight is a fine-bladed intraoral scissor designed for precision suture trimming and soft-tissue work. Short straight pointed blades meet at a fine beak that cuts flush to a suture knot without catching the surrounding mucosa, and the lightweight stainless-steel body gives a balanced feel during extended suturing and closure procedures. Ring handles with a gold-plated finish help staff identify it on a mixed tray, and the corrosion-resistant body is fully autoclavable between patients. This Equate Instruments scissor is supplied non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Classic Suture Scissors Straight 11.5cm
The Classic suture scissors are a polished stainless-steel instrument for routine suture trimming and soft-tissue cutting in oral and periodontal surgery. The straight fine-point blades approach knots in a direct line of sight, making them well suited to post-operative suture removal and to intra-operative trimming of absorbable sutures close to the knot. The 11.5 cm working length balances tip precision with enough leverage for confident cutting, and the polished ring handles give a comfortable three-point grip. Fabricated from stainless steel and delivered non-sterile by Equate Instruments, the instrument is fully autoclavable and ready for processing in pouches or cassettes.
View
Classic Suture Scissors Curved 11.5cm
The Classic suture scissors are a polished stainless-steel instrument for routine suture trimming and soft-tissue cutting in oral and periodontal surgery. The curved fine-point blades follow the contour of the papilla and interproximal sites, making them well suited to trimming sutures tucked against the tissue and to cutting at difficult angles where a straight blade cannot lie flat. The 11.5 cm working length balances tip precision with enough leverage for confident cutting, and the polished ring handles give a comfortable three-point grip. Fabricated from stainless steel and delivered non-sterile by Equate Instruments, the instrument is fully autoclavable and ready for processing in pouches or cassettes.
View
IRIS Suture Scissors Curved - Black-Coated 11.5cm
The black-coated IRIS suture scissors are a fine-pointed cutting instrument designed for trimming sutures close to the knot and managing delicate soft tissue during oral surgical procedures. The slim curved blades and sharp points allow controlled access around the papilla and interproximal sites, while the non-reflective matte-black coating reduces glare from overhead lighting and surgical loupes. Forged from stainless steel and overlaid with a durable black surface treatment, the 11.5 cm length gives balanced leverage between the ring handles and the working tips. The instrument is fully autoclavable and supplied non-sterile from Equate Instruments for in-clinic sterilisation in pouches or cassettes.
View
IRIS Suture Scissors Straight - Black-Coated 11.5cm
The black-coated IRIS suture scissors are a fine-pointed cutting instrument designed for trimming sutures close to the knot and managing delicate soft tissue during oral surgical procedures. The slim straight blades and sharp points allow controlled linear approach to sutures and tissue edges, while the non-reflective matte-black coating reduces glare from overhead lighting and surgical loupes. Forged from stainless steel and overlaid with a durable black surface treatment, the 11.5 cm length gives balanced leverage between the ring handles and the working tips. The instrument is fully autoclavable and supplied non-sterile from Equate Instruments for in-clinic sterilisation in pouches or cassettes.
View
Angled Suture Scissors - 11.5 cm
The Angled Suture Scissors is an 11.5 cm intraoral scissor with blades set at an angle to the shaft, so the operator can reach into a posterior site and cut a suture flush without lifting the handle into the operating light. The angle keeps the hand low and clears the line of sight to the knot, while fine pointed blades cut the suture cleanly without catching surrounding mucosa. This Equate Instruments scissor is machined from corrosion-resistant stainless steel, supplied non-sterile, and fully autoclavable for in-clinic steam sterilisation between patients.
View
Locklin Angular Suture Scissors - 16 cm
The Locklin Angular Suture Scissors is a 16 cm intraoral scissor with blades bent at a steep angle to the shaft, built for suture removal and intraoperative trimming in posterior sites that a conventional or mildly angled scissor cannot reach. The long 16 cm shank places the operator's hand well clear of the lip line, and the angled tip puts the cutting edge flat on the knot. Fine pointed blades cut cleanly flush without catching adjacent tissue. This Equate Instruments scissor is machined from corrosion-resistant stainless steel, supplied non-sterile, and fully autoclavable between patients for in-clinic steam sterilisation.
View
Goldman-Fox Scissor TC Curved - Black Titanium Coated
The Goldman-Fox Scissor TC Curved is a fine-tipped oral-surgery and periodontal scissor engineered for precise soft-tissue dissection, gingival tissue trimming, and controlled suture cutting. The curved working tips carry black titanium-coated blades with tungsten carbide (TC) inserts, producing a clean low-trauma cut and prolonged edge retention through extended chairside use. Equate Instruments supplies this scissor in surgical-grade stainless steel with satin-finished ring handles, a configuration favoured by periodontists and oral surgeons for flap refinement, wedge procedures, and fine tissue approximation. The dark titanium coating reduces operatory-light glare, resists staining over repeated autoclave cycles, and the instrument ships non-sterile for standard in-clinic steam sterilisation.
View
Goldman-Fox Scissor TC Straight - Black Titanium Coated
The Goldman-Fox Scissor TC Straight is a fine-tipped oral-surgery and periodontal scissor engineered for precise soft-tissue dissection, gingival tissue trimming, and controlled suture cutting along straight planes. The straight working tips carry black titanium-coated blades reinforced with tungsten carbide (TC) inserts, producing a clean low-trauma cut and prolonged edge retention through extended chairside use. Equate Instruments supplies this scissor in surgical-grade stainless steel with satin-finished ring handles, a configuration favoured by periodontists and oral surgeons for flap refinement, wedge procedures, and fine tissue approximation. The dark titanium coating reduces operatory-light glare, resists staining over repeated autoclave cycles, and the instrument ships non-sterile for standard in-clinic steam sterilisation.
View
