Carver 5 - Double-Ended 2.0/2.5mm with Knurled Handle
Carver 5 is a double-ended restorative hand carver used to remove excess amalgam or composite and to sculpt occlusal anatomy into cured and uncured restorations. One end presents a small flat paddle blade for broad excess removal and fossa shaping, while the opposite end carries a fine curved tip for contouring marginal ridges, triangular ridges and supplemental grooves. The 2.0-2.5 mm working size keeps the instrument versatile across posterior preparations. Machined from surgical-grade stainless steel on a lightweight knurled handle, the instrument delivers a stable grip during fine carving strokes. It is fully autoclavable between patients. Equate Instruments hand-finishes each edge so the Carver 5 keeps predictable geometry across many steam-sterilisation cycles.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Nystrom III Carver 2.0/2.5mm - Knurled Handle
The Nystrom III Carver is a double-ended restorative hand carver used to trim excess amalgam and sculpt occlusal anatomy during posterior restorations. One working end presents a flat angled blade suited to removing excess material and shaping fossae, while the opposite end carries a fine curved tip for carving triangular ridges, cusp slopes and supplemental grooves. The 2.0-2.5 mm working widths keep the instrument versatile across Class I and Class II preparations. Machined from surgical-grade stainless steel and finished on a lightweight knurled handle, the Nystrom III balances comfortably for extended carving work. It is fully autoclavable and supplied non-sterile for routine clinic reprocessing. Equate Instruments hand-finishes each edge so the carver keeps predictable geometry after many sterilisation cycles.
View
Double-Ended Dental Carver - Knurled Handle
This double-ended dental carver is a restorative hand instrument built to remove excess amalgam or composite and to sculpt anatomical detail into direct restorations. One working end presents a small flat paddle blade for broad excess removal and fossa shaping, while the opposite end carries a fine curved pointed tip for refining cusp slopes, supplemental grooves and marginal ridges. The slim shank profile fits comfortably into posterior preparations as well as anterior build-ups. Machined from surgical-grade stainless steel on a lightweight knurled handle, the instrument balances for extended carving work without fatiguing the fingertips. It is fully autoclavable between patients. Equate Instruments hand-finishes each edge to keep working geometry consistent across many reprocessing cycles.
View
Nystrom III Carver 1.8 mm
The Nystrom III is a double-ended restorative carver with fine, angled working tips engineered for carving, shaping, and refining occlusal anatomy in composite and amalgam restorations. Its narrow profile allows precise access to grooves and marginal ridges where a wider carver would obscure the operative field. The silicone-sleeved anatomical handle provides a balanced fingertip grip during detailed carving, and the stainless-steel working ends hold their geometry across repeated sterilisation cycles. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
View
Nystrom III Carver 1.8 mm
The Nystrom III is a double-ended restorative carver with fine, angled working tips engineered for carving, shaping, and refining occlusal anatomy in composite and amalgam restorations. Its narrow profile allows precise access to grooves and marginal ridges where a wider carver would obscure the operative field. The silicone-sleeved anatomical handle provides a balanced fingertip grip during detailed carving, and the stainless-steel working ends hold their geometry across repeated sterilisation cycles. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
View
Nystrom III Carver Slim Green
The Nystrom III is a double-ended restorative carver with fine, angled working tips engineered for carving, shaping, and refining occlusal anatomy in composite and amalgam restorations. Its narrow profile allows precise access to grooves and marginal ridges where a wider carver would obscure the operative field. The silicone-sleeved anatomical handle provides a balanced fingertip grip during detailed carving, and the stainless-steel working ends hold their geometry across repeated sterilisation cycles. Supplied non-sterile by Equate Instruments for in-office steam processing in pouches or cassettes.
View
Frahm Carver - Light Green Silicone Slim Handle
The Frahm Carver is a double-ended restorative carver for shaping amalgam and packable composite on occlusal and proximal surfaces. The pointed working tip on one end defines pits, grooves, and narrow line angles; the flat, slightly angled counter-tip refines cusp inclines and trims marginal overhangs without gouging the cavosurface. The slim light-green silicone-sleeved handle from Equate Instruments cushions sustained carving appointments and helps sort carvers and modellers at a glance in a cassette. Stainless-steel tips resist bending under carving force and are fully autoclavable.
View
Maehlum Carver - Light Green Silicone Slim Handle
The Maehlum Carver is a double-ended restorative carver with paired bevelled working ends for shaping amalgam and packable composite. The more angled end refines cusp inclines and trims marginal overhangs; the counter-tip is bevelled in the opposite direction so the clinician can carve mirror-image surfaces on buccal and lingual cusps without rotating the patient's head. The slim light-green silicone-sleeved handle from Equate Instruments cushions sustained carving sessions and helps identify the Maehlum pattern at a glance inside a restorative cassette. Stainless-steel tips retain their edge through repeated autoclaving.
View
1/2 Hollenback Carver - Light Green Silicone Slim Handle
The 1/2 Hollenback Carver is a classic double-ended amalgam and composite carver. Its two angled paddle tips are offset to trim overhangs, carve marginal ridges, and establish interproximal contours without flattening the occlusal anatomy already shaped by the operator. The slim light-green silicone-sleeved handle from Equate Instruments cushions the grip during sustained carving and speeds colour-coded sorting inside a cassette. Stainless-steel paddles hold their edge through repeated autoclaving and are designed to resist bending when trimming firm amalgam.
View
Hollenback 1/2 Carver - Solid Handle
The Hollenback 1/2 Carver is a double-ended restorative hand instrument with the classic Hollenback blade geometry. Its mirror-image curved blades sweep in opposite directions, giving the operator clean carving access to both mesial and distal occlusal anatomy without changing instruments during amalgam or composite condensation. Manufactured from stainless steel, the carver is fitted with a 6 mm solid knurled handle that balances weight evenly for sustained operator control. Equate Instruments supplies it as a reusable autoclavable tool, delivered non-sterile for in-clinic steam sterilisation in pouches or cassettes.
View
Frahm Carver, Solid Handle 6 mm
A Frahm-pattern carver used to contour, trim, and refine anatomy on composite and amalgam restorations. The slim, slightly curved working blades reach into interproximal and anterior areas that larger carvers cannot access comfortably, making the instrument well suited to final shaping of restoration embrasures and line angles. Built by Equate Instruments as a one-piece stainless steel hand instrument, the carver features a 6 mm knurled solid handle for secure grip. Fully autoclavable and supplied non-sterile for routine in-office steam sterilisation.
View
Frahm Carver, Solid Handle 6 mm
A Frahm-pattern carver used to contour, trim, and refine anatomy on composite and amalgam restorations. The slim, slightly curved working blades reach into interproximal and anterior areas that larger carvers cannot access comfortably, making the instrument well suited to final shaping of restoration embrasures and line angles. Built by Equate Instruments as a one-piece stainless steel hand instrument, the carver features a 6 mm knurled solid handle for secure grip. Fully autoclavable and supplied non-sterile for routine in-office steam sterilisation.
View
Fig. H1 Hollenback Carver 1.0/1.7mm
The Fig. H1 Hollenback Carver is a double-ended restorative instrument with angled Hollenback blades of 1.0 mm and 1.7 mm, designed for carving occlusal and interproximal anatomy in amalgam restorations. The characteristic offset shank allows the operator to sweep the blade along the tooth surface from a comfortable pen grasp while maintaining line-of-sight on the restoration. Machined from high-grade stainless steel and mounted on a 6 mm solid knurled handle, this carver from Equate Instruments is fully autoclavable and corrosion-resistant. The textured grip keeps tactile feedback during wet procedures and the balanced shaft supports controlled, shaving strokes. Supplied non-sterile for in-clinic steam sterilisation.
View
