Direct Bond Bracket Remover - Wide with Replaceable Tip and Pad, Tungsten Carbide
This direct-bond bracket remover is a wide-beak debonding plier built for sustained clinical use, featuring both a replaceable tungsten-carbide tip and a replaceable cushion pad. The wide upper cushion seats the bracket wings while the flat lower anvil supports the pad, so a single controlled pinch peels the bonded bracket off the enamel in one motion. When the working insert or cushion wears, the clinician swaps the replaceable parts rather than the whole plier, protecting the long-term investment. Long curved stainless-steel handles reduce operator force, and the plier is autoclavable and supplied non-sterile. From Equate Instruments, this is a workshop-grade debonder for busy orthodontic practices.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Angulated Debonding Pliers (TC)
The Angulated Debonding Pliers are orthodontic instruments built for clean, controlled bracket removal at the end of fixed-appliance treatment. The angulated working head lets the clinician line up on the bonding base of each bracket, concentrating shear force at the adhesive interface so the bracket lifts cleanly without unnecessary load on the enamel. A tungsten carbide insert on the occluding jaw holds its edge through many debonding cycles, keeping the action predictable across full-mouth appointments. From Equate Instruments, the plier features slim tapered arms and a smooth spring return for comfort in extended sessions. The body is corrosion-resistant stainless steel, fully autoclavable, and supplied non-sterile for in-clinic sterilisation in the clinician's preferred workflow.
View
Adhesive Removing Pliers (TC)
The Adhesive Removing Pliers are built for post-debond clean-up, lifting residual bonding composite from the enamel without scarring the tooth surface. The plier pairs a white Teflon occlusal pad with a tungsten-carbide scraping tip on the opposing jaw. In use, the Teflon pad seats on the occlusal surface of the tooth while the TC scraper sweeps along the labial or buccal face, shearing adhesive away at the enamel interface. The forged stainless steel body from Equate Instruments is slim and well-balanced for extended chairside sessions, with a smooth spring return between squeezes. It is corrosion-resistant and fully autoclavable, and the working parts are replaceable when worn so the plier stays in service longer. Supplied non-sterile for in-clinic processing.
View
Adhesive Remover Changeable Parts - 5 Sets (Carbide Tip + Teflon Pad)
This pack contains five replacement sets of working parts for orthodontic adhesive removing pliers. Each set includes one tungsten carbide scraping tip and one Teflon occlusal pad, ready to swap into a compatible adhesive-removing plier when the original parts wear or foul with composite residue. Keeping a stock of replacement tips extends the life of the parent instrument and keeps post-debond finishing predictable appointment after appointment. The tungsten carbide tip is machined for consistent edge geometry, while the Teflon pad provides a soft, non-marking stop against the occlusal surface of the tooth during scraping. Parts from Equate Instruments fit standard adhesive removing pliers designed around a snap-in or screw-retained tip interface. Supplied non-sterile for processing in the clinic's preferred workflow.
View
Direct Bond Remover - Wide Tungsten Carbide
This direct-bond remover is a wide-beak orthodontic debonding plier with tungsten-carbide working inserts that grip the bracket wings and peel the bonded pad cleanly off the enamel. The wide upper cushion and flat lower anvil cradle the bracket fully, spreading the load across the pad so the adhesive releases in a single controlled motion. Long curved stainless-steel handles with polished tungsten-carbide grip surfaces close the jaws with low operator effort and resist the repeated wear of debonding cycles. Autoclavable and supplied non-sterile, this Equate Instruments plier is made for efficient end-of-treatment bracket removal on metal brackets with wide-base pads.
View
Debonding Pliers
The Debonding Plier lifts metal and ceramic orthodontic brackets from enamel at the end of active treatment. The offset angled beak slides under the bracket base and applies a controlled shearing force along the bonding interface, separating the bracket cleanly while protecting the tooth surface from direct loading. Equate Instruments forges this plier from hardened stainless steel with tapered chairside-length handles for balanced force transfer and full autoclave compatibility. Supplied non-sterile for in-clinic steam sterilisation.
View
Angled Direct Bond Remover Plier Long Handle
The Direct Bond Remover is an angled-head orthodontic plier designed to grip and shear adhesive-bonded brackets and cemented attachments from enamel without gouging the tooth surface. The angled tips approach the bracket base at a shallow angle, engaging the wings or pad and applying controlled rotational pressure that fractures the resin bond along its weakest plane. The long-handle geometry delivers mechanical advantage for posterior debonding, and the curved reverse-handle profile keeps the operator's hand clear of the patient's cheek. Manufactured from corrosion-resistant stainless steel, this Equate Instruments debonding plier is fully autoclavable and supplied non-sterile for routine in-clinic steam sterilisation. A practical chairside tool for end-of-treatment bracket removal.
View
Adhesive Removing Pliers
The Adhesive Removing Pliers are purpose-built for clearing cured composite resin from enamel after bracket debonding. A double-ended replaceable carbide rod works against an opposing Teflon stud, letting the carbide shear adhesive away from the tooth while the soft stud protects the opposing surface and absorbs compressive load. Both the carbide rod and the Teflon stud are replaceable. Machined from passivated stainless steel with a rivet joint hinge and smoothly contoured ergonomic handles, this plier from Equate Instruments is fully autoclavable and withstands repeated steam sterilisation. Supplied non-sterile, ultrasonically cleaned, latex-free, and individually packed, ready for standard in-clinic sterilisation.
View
Direct Bond Bracket Remover Plier
The Direct Bond Bracket Remover Plier is an orthodontic debonding instrument with a notched upper beak that engages the bracket wings and a flat lower beak that rests on the occlusal or incisal edge. Closing the handle pivots the bracket off the tooth with minimal enamel stress, preserving the surface for re-bonding or finishing. Forged from stainless steel with a slim spring-return handle, this Equate Instruments plier is fully autoclavable and supplied non-sterile for in-clinic processing between patients.
View
Hammerhead NiTi Cinch Back Pliers 0.64 mm (.025″ Wire)
The Hammerhead NiTi Cinch Back Pliers are built to bend the distal end of NiTi and stainless archwires once they exit the buccal tube. The slim hammerhead working head reaches comfortably to the terminal molar region and places a clean, right-angled bend that stops the wire from sliding anteriorly and protects the patient's soft tissues from sharp ends. Equate Instruments constructs the plier in forged stainless steel with tapered arms, a smooth box-joint pivot, and a balanced spring return. The instrument is rated for round and rectangular archwires up to 0.64 mm (.025″), is corrosion resistant, and is fully autoclavable. It is supplied non-sterile for processing through the clinic's standard sterilisation cycle.
View
Mathieu Orthodontic Ligature Pliers 14 cm
The Mathieu Orthodontic Ligature Pliers are a spring-loaded, ratcheted instrument for placing and twisting stainless ligature wire around orthodontic brackets. A serrated narrow working tip grips the wire end firmly, while the internal ratchet lets the clinician set and hold the grip without maintaining finger pressure. The teardrop-shaped handle with an internal leaf spring gives a light, self-opening action and excellent tactile feedback during fine ligation. From Equate Instruments, the 14 cm stainless steel body is corrosion resistant, fully autoclavable, and balanced for the extended chairside use typical of full-arch ligation. Supplied non-sterile for processing in the clinic's usual sterilisation workflow.
View
Mathieu Narrow-Tip Ligature Pliers 14 cm
The Mathieu Narrow-Tip Ligature Pliers are a spring-loaded, ratcheted instrument for placing and twisting stainless ligature wire around orthodontic brackets. The slim serrated working tip grips the ligature tail firmly, and the internal ratchet locks the jaws closed under tension so the clinician does not need to maintain finger pressure while twisting. The teardrop-shaped handle with a leaf-spring interior gives a light, self-opening action and good tactile feedback. From Equate Instruments, the 14 cm narrow-tip body is forged stainless steel, balanced for long ligation sessions, corrosion resistant, and fully autoclavable. Supplied non-sterile so the clinic can process it through its usual sterilisation workflow.
View
Bracket Remover with Narrow Tip
This orthodontic bracket remover is a precision debonding plier engineered to lift metal and ceramic brackets from the enamel with a controlled shear force. The narrow upper beak slips under the bracket base while the opposing tip rests against the archwire or crown, so the rotational pinch breaks the adhesive bond without loading the adjacent teeth. The long, curved stainless-steel handles close the jaws with minimal operator force and taper outward for a comfortable two-finger grip. Autoclavable and supplied non-sterile, this Equate Instruments plier is made for clinicians who need a narrow-tip remover for tight interbracket spaces and small anterior brackets.
View
