Discoid-Cleoid Carver - Solid Handle 6mm
The Discoid-Cleoid Carver is a classic double-ended restorative instrument used to carve occlusal anatomy into amalgam and large composite restorations. The discoid end is a shallow disc-shaped blade with a sharp circumferential edge, ideal for shaping cusps and marginal ridges, while the cleoid end is a claw-shaped pointed blade suited to refining fossae, developmental grooves, and line angles. The carver is machined from stainless steel with a 6 mm knurled solid handle for balanced control during fine carving. Fully autoclavable and supplied non-sterile by Equate Instruments, it is ready for steam sterilisation.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Cleoid-Discoid Carver - Light Green Silicone Slim Handle
The Cleoid-Discoid Carver is a classic double-ended restorative carver for shaping amalgam and packable composite. The cleoid end is a pointed, claw-shaped blade used to carve pits, grooves, and line angles; the discoid end is a round, disc-shaped blade that sweeps cusp inclines and refines broader occlusal anatomy. The slim light-green silicone-sleeved handle from Equate Instruments cushions carving appointments and keeps the cleoid-discoid easy to pick out of a cassette. Stainless-steel tips hold their edge through repeated autoclaving and resist bending under carving force.
View
Fig 1 Discoid-Cleoid Carver 1.7/1.7mm - Solid Handle 6mm
The Fig 1 Discoid-Cleoid Carver is a double-ended restorative instrument engineered for carving amalgam and composite during placement and finishing. Two 1.7 mm cleoid working tips are offset at opposite angles to shape occlusal anatomy, cuspal inclines, marginal ridges, and interproximal embrasures without removing sound tooth structure. The 6 mm knurled stainless-steel handle is lightweight and balanced for tactile carving on posterior teeth. Equate Instruments supplies this autoclavable carver non-sterile for in-clinic steam sterilisation alongside other restorative hand instruments.
View
Fig 2 Discoid-Cleoid Carver 2.0/2.0mm - Solid Handle 6mm
The Fig 2 Discoid-Cleoid Carver is a double-ended restorative instrument for shaping amalgam and composite during condensation and finishing. Two 2.0 mm cleoid working tips are offset at opposite angles, allowing access to both mesial and distal surfaces without swapping instruments. The slightly larger tip diameter suits posterior restorations where broader occlusal anatomy and marginal ridges need to be carved. The 6 mm knurled stainless-steel handle is light in the hand and provides a secure, tactile grip during extended restorative appointments. Equate Instruments delivers this autoclavable carver non-sterile, ready for in-clinic steam sterilisation in pouches or cassettes.
View
Fig 4 Discoid-Cleoid Carver 3.0/2.7mm - Solid Handle 6mm
The Fig 4 Discoid-Cleoid Carver is a double-ended restorative instrument sized for carving larger posterior restorations. A 3.0 mm cleoid tip at one end and a 2.7 mm cleoid tip at the other are offset at opposite angles, allowing controlled shaping of occlusal anatomy, cuspal inclines, and marginal ridges in molars without swapping instruments. The 6 mm knurled stainless-steel handle keeps the instrument light and responsive for sustained carving. Equate Instruments supplies this carver non-sterile and fully autoclavable, ready for routine in-clinic steam sterilisation in pouches or cassettes.
View
Fig. 3 Cleoids 2.5/2.5mm Solid Handle 6mm
The Fig. 3 Cleoid is a double-ended restorative carver with 2.5 mm cleoid working ends at both sides. The pointed claw-shaped blades carve amalgam and composite occlusal anatomy - cusp tips, central grooves, and fossae - with controlled pressure along the marginal ridges. Forged by Equate Instruments from autoclavable stainless steel with a knurled 6 mm solid handle, the Fig. 3 Cleoid supports the full carving sequence from gross shaping to fine anatomical detail. Supplied non-sterile for in-office steam sterilisation in cassettes or pouches.
View
Carver 5 - Double-Ended 2.0/2.5mm with Knurled Handle
Carver 5 is a double-ended restorative hand carver used to remove excess amalgam or composite and to sculpt occlusal anatomy into cured and uncured restorations. One end presents a small flat paddle blade for broad excess removal and fossa shaping, while the opposite end carries a fine curved tip for contouring marginal ridges, triangular ridges and supplemental grooves. The 2.0-2.5 mm working size keeps the instrument versatile across posterior preparations. Machined from surgical-grade stainless steel on a lightweight knurled handle, the instrument delivers a stable grip during fine carving strokes. It is fully autoclavable between patients. Equate Instruments hand-finishes each edge so the Carver 5 keeps predictable geometry across many steam-sterilisation cycles.
View
Nystrom I Composite Instrument - Hollow Stainless Handle
The Nystrom I is a double-ended composite modelling instrument designed for contouring and sculpting resin-based restorations. One working end presents a slender angled probe for adapting composite along line-angles and narrow fissures, while the opposite end offers a slightly broader curved blade for shaping occlusal anatomy and placing delicate increments. Crafted from precision-machined stainless steel with a hollow, knurled ergonomic handle, the instrument is lightweight, autoclavable, and sits comfortably in a pen grip during lengthy restorative procedures. Equate Instruments supplies the Nystrom I non-sterile for in-clinic steam sterilisation.
View
Nystrom III Carver 2.0/2.5mm - Knurled Handle
The Nystrom III Carver is a double-ended restorative hand carver used to trim excess amalgam and sculpt occlusal anatomy during posterior restorations. One working end presents a flat angled blade suited to removing excess material and shaping fossae, while the opposite end carries a fine curved tip for carving triangular ridges, cusp slopes and supplemental grooves. The 2.0-2.5 mm working widths keep the instrument versatile across Class I and Class II preparations. Machined from surgical-grade stainless steel and finished on a lightweight knurled handle, the Nystrom III balances comfortably for extended carving work. It is fully autoclavable and supplied non-sterile for routine clinic reprocessing. Equate Instruments hand-finishes each edge so the carver keeps predictable geometry after many sterilisation cycles.
View
Double-Ended Dental Carver - Knurled Handle
This double-ended dental carver is a restorative hand instrument built to remove excess amalgam or composite and to sculpt anatomical detail into direct restorations. One working end presents a small flat paddle blade for broad excess removal and fossa shaping, while the opposite end carries a fine curved pointed tip for refining cusp slopes, supplemental grooves and marginal ridges. The slim shank profile fits comfortably into posterior preparations as well as anterior build-ups. Machined from surgical-grade stainless steel on a lightweight knurled handle, the instrument balances for extended carving work without fatiguing the fingertips. It is fully autoclavable between patients. Equate Instruments hand-finishes each edge to keep working geometry consistent across many reprocessing cycles.
View
Restorative Carving Instrument Solid Handle 6 mm
The Restorative Carving Instrument is a double-ended hand instrument for trimming excess material and sculpting anatomical features in composite, amalgam, and wax-up restorations. Each end carries a differently profiled blade or point, giving clinicians a dedicated edge for gross reduction and a finer tip for fissure, cusp, and marginal definition within a single instrument. Precision-ground by Equate Instruments from polished stainless steel and fitted with a knurled solid handle for pen-grip stability, the carver supports controlled, low-fatigue work across direct restorations and diagnostic waxing. Delivered non-sterile and fully autoclavable for standard in-clinic sterilisation.
View
Nystrom I Composite Carver 2.0 mm - 6 mm Solid Handle
The Nystrom I composite carver is a double-ended operative instrument used to shape, adapt, and trim composite resin during direct restorations. The 2.0 mm working tips allow fine anatomical carving of marginal ridges, occlusal grooves, and cuspal inclines while helping reduce the risk of voids and overhangs at cavosurface margins. Fabricated by Equate Instruments from hardened stainless steel with a 6 mm solid knurled handle, this carver delivers the controlled grip needed for sculpting freshly placed composite. It is fully autoclavable for steam sterilisation in pouches or cassettes.
View
Nystrom III Composite Carver 2.0/2.5 mm - 6 mm Solid Handle
The Nystrom III composite carver is a double-ended operative instrument used to carve, adapt, and trim direct composite and amalgam restorations. One end carries a 2.0 mm tip for fine anatomy work while the opposing 2.5 mm tip handles broader bulk contouring, letting the clinician switch sizes without swapping instruments. Fabricated by Equate Instruments from hardened stainless steel with a 6 mm solid knurled handle, this carver gives the controlled grip needed for detailed sculpting and excess material removal. It is fully autoclavable for steam sterilisation in pouches or cassettes.
View
