Instrument Tray with Lid 23 x 15 x 5 cm
The 23 x 15 x 5 cm stainless-steel instrument tray with loose-fit lid is a dependable workhorse for holding and covering clean or contaminated dental instruments between procedures. The deep rectangular basin accommodates forceps, scalers, elevators and full procedure set-ups, while the knob-handled lid keeps the contents shielded from splatter and airflow. Fabricated from polished stainless steel by Equate Instruments, this tray is fully autoclavable and tolerates routine chemical disinfection. The smooth interior wipes clean, and the lid doubles as a working surface when needed.
Specifications
MaterialStainless SteelRusting PreventionPassivatedUltrasonic CleanedYesUsageLeft Hand or Right HandSterileNoReusableYesTests PerformedShape Test, Boil Test and Performance TestLatex FreeYesPackingIndividually PackedQc PassedYesRelated Products
Multi-Instrument Sterilization Tray with Clips - Small
The Small Multi-Instrument Sterilization Tray is a stainless-steel procedure tray designed to hold mixed dental instruments in one pass through the ultrasonic bath, washer-disinfector, and autoclave. The base and lid are laser-perforated for thorough steam access, and dual blue silicone rails hold scalers, curettes, explorers, and smaller hand instruments in ordered rows while built-in stainless clips on the lid secure longer items such as scissors, needle holders, and forceps. The hinged clam-shell design latches closed for safe transport between stations. Fully autoclavable and corrosion-resistant, the tray is supplied by Equate Instruments as a reusable workflow unit for mixed surgical and restorative kits.
View
Autoclavable Plastic Tray for Luxating Elevators
The Plastic Tray for Luxating Elevators is an autoclavable procedure tray shaped to hold plastic-handled luxating elevators in a defined layout during cleaning, sterilisation, and chairside presentation. The open-frame design holds each elevator by the handle so the working blade sits free in the air, letting steam and detergent reach every surface during ultrasonic cleaning and autoclave cycles. Available in black and grey, the tray is manufactured from a heat-stable autoclavable polymer and pairs with the full luxator kit for one-step sterilisation. Equate Instruments supplies the tray non-sterile for first-use sterilisation in the clinic's standard workflow.
View
Kidney Tray 20 cm
The 20 cm stainless-steel kidney tray is an essential chairside and surgery accessory for holding small instruments, gauze, extracted teeth and waste at the point of care. The concave kidney profile conforms to the patient's jawline or the assistant's forearm, directing fluid and debris into the deep reservoir without spilling over the sides. Formed from polished stainless steel by Equate Instruments, this tray is fully autoclavable and supplied non-sterile so it can be processed in the clinic's preferred workflow. The smooth rolled rim resists bending during repeated use and wipe-down disinfection.
View
Instrument Tray 27.5 x 17.3 x 3.8 cm
The 27.5 x 17.3 x 3.8 cm instrument tray is a polished stainless-steel procedure tray sized for full operative and hygiene set-ups. The open rectangular basin accepts forceps, scalers, elevators, mirrors and cassettes without crowding, and the shallow 3.8 cm depth keeps instruments visible at chairside. Pressed from a single sheet of stainless steel by Equate Instruments, the tray is corrosion-resistant, fully autoclavable and tolerates chemical disinfection. The smooth rolled rim reinforces the edge and wipes clean between uses.
View
Shallow Mayo Tray 28 x 17.5 x 3.9 cm
The 28 x 17.5 x 3.9 cm shallow Mayo tray is a polished stainless-steel procedure tray used on Mayo stands and chairside surfaces for laying out operative, hygiene and surgical set-ups. The low-profile basin keeps instruments fully visible and quickly reachable during procedures, and the generous footprint accepts cassettes and full hand-instrument kits side by side. Fabricated by Equate Instruments from corrosion-resistant stainless steel, the tray is autoclavable and tolerates chemical disinfection. The smooth rolled rim reinforces the edge for rigidity and easy handling.
View
Instrument Tray 20 x 10 x 2 cm
This compact 20 x 10 x 2 cm instrument tray is designed for small dental set-ups - single-procedure kits, endodontic files, hand instruments and restorative ends. The ribbed bottom raises instruments above any condensate, keeping handles out of standing liquid and making it easier to pick up the next tool. Made from polished stainless steel by Equate Instruments, the tray is corrosion-resistant, fully autoclavable and compatible with chemical disinfection. The rolled rim adds rigidity to the thin-walled body.
View
Catheter Tray
The catheter tray is a compact, wedge-profile stainless-steel holder used where space is limited and a discreet chairside tray is needed. The narrow base stacks neatly on bracket tables and mobile carts, and the raised rim contains catheter tips, suction tubing, cartridges and small instruments during a procedure. Polished stainless steel makes the tray from Equate Instruments autoclavable and easy to wipe clean. Supplied non-sterile for in-clinic processing in pouches or cassettes.
View
Mini Procedure Tray 60 x 50 x 15 mm
This mini procedure tray is a compact 60 x 50 x 15 mm stainless steel dish designed to hold small parts and consumables during chairside procedures - matrix bands, rubber-dam clamps, endodontic files, or cotton pellets between uses. The recessed well keeps contents corralled on a busy bracket table, and the smooth rolled rim makes it easy to pick up and wipe down. Equate Instruments manufactures the tray in stainless steel so it is fully autoclavable and resistant to the corrosive effects of disinfectants. It is supplied non-sterile for processing through the clinic's standard sterilisation workflow.
View
Stainless-Steel Instrument Tray - 10 x 15 x 2.5 cm
The Instrument Tray is a shallow rectangular stainless-steel dish measuring 10 x 15 x 2.5 cm with a recessed flat floor and rolled safety edges. It holds a small run of instruments, cotton products, burs, or mixed consumables at chairside and during instrument reprocessing. The low 2.5 cm wall keeps contents visible and easy to pick up without hiding the back row, and the rolled rim is smooth against gloved fingers. The tray is deep enough to stage unit-dose consumables yet thin enough to stack inside cabinet drawers or on cart shelves. Manufactured from corrosion-resistant stainless steel by Equate Instruments, the tray is fully autoclavable and reusable across operatory, laboratory, and sterilisation workflows.
View
Stainless-Steel Instrument Tray - 15 x 20 x 4 cm
The Instrument Tray is a rectangular stainless-steel dish measuring 15 x 20 x 4 cm with a recessed flat floor and rolled safety edges. It holds a routine operative or hygiene instrument set at chairside and supports instrument handling during reprocessing. The 4 cm wall is deep enough to contain loose burs, cotton rolls, and impression accessories without spillage during transport yet shallow enough to keep every instrument visible at a glance. The rolled rim is smooth against gloved fingers and resists burring over the tray's service life. Manufactured from corrosion-resistant stainless steel by Equate Instruments, the tray is fully autoclavable and reusable across operatory, laboratory, and sterilisation workflows.
View
Stainless-Steel Instrument Tray - 20 x 25 x 4.5 cm
The Instrument Tray is a rectangular stainless-steel dish measuring 20 x 25 x 4.5 cm with a recessed flat floor and rolled safety edges. It accommodates a full operative or restorative setup, extraction kit, or combined instrument and consumable tray at chairside. The 4.5 cm wall contains loose items during transport between sterilisation and the chair, while the generous floor prints the full layout of a ten- to fifteen-instrument kit without overlap. The rolled rim stays smooth against gloved fingers and resists burring over long service. Manufactured from corrosion-resistant stainless steel by Equate Instruments, the tray is fully autoclavable and reusable across operative, surgical, and laboratory workflows.
View
Stainless-Steel Instrument Tray - 25 x 30 x 5 cm
The Instrument Tray is a rectangular stainless-steel dish measuring 25 x 30 x 5 cm with a recessed flat floor and rolled safety edges. It is the largest of the standard procedure trays and accommodates a full surgical or implant setup, a multi-procedure combined kit, or a laboratory work tray. The 5 cm wall contains bulkier consumables - gauze reserves, suture packs, implant parts trays - during transport between sterilisation and the operatory. The rolled rim is smooth against gloved fingers and preserves tray edge integrity over long service. Manufactured from corrosion-resistant stainless steel by Equate Instruments, the tray is fully autoclavable and reusable across surgical, implant, restorative, and laboratory workflows.
View
